user/sven/linux.git/include/linux/amba/mmci.h, branch stable/3.2.y

Fix common misspellings

2011-03-31T14:26:23Z

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi

ARM: mmci: add dmaengine-based DMA support

2011-02-04T13:25:49Z

Based on a patch from Linus Walleij. Add dmaengine based support for DMA to the MMCI driver, using the Primecell DMA engine interface. The changes over Linus' driver are: - rename txsize_threshold to dmasize_threshold, as this reflects the purpose more. - use 'mmci_dma_' as the function prefix rather than 'dma_mmci_'. - clean up requesting of dma channels. - don't release a single channel twice when it's shared between tx and rx. - get rid of 'dma_enable' bool - instead check whether the channel is NULL. - detect incomplete DMA at the end of a transfer. Some DMA controllers (eg, PL08x) are unable to be configured for scatter DMA and also listen to all four DMA request signals [BREQ,SREQ,LBREQ,LSREQ] from the MMCI. They can do one or other but not both. As MMCI uses LBREQ/LSREQ for the final burst/words, PL08x does not transfer the last few words. - map and unmap DMA buffers using the DMA engine struct device, not the MMCI struct device - the DMA engine is doing the DMA transfer, not us. - avoid double-unmapping of the DMA buffers on MMCI data errors. - don't check for negative values from the dmaengine tx submission function - Dan says this must never fail. - use new dmaengine helper functions rather than using the ugly function pointers directly. - allow DMA code to be fully optimized away using dma_inprogress() which is defined to constant 0 if DMA engine support is disabled. - request maximum segment size from the DMA engine struct device and set this appropriately. - removed checking of buffer alignment - the DMA engine should deal with its own restrictions on buffer alignment, not the individual DMA engine users. - removed setting DMAREQCTL - this confuses some DMA controllers as it causes LBREQ to be asserted for the last seven transfers, rather than six SREQ and one LSREQ. - removed burst setting - the DMA controller should not burst past the transfer size required to complete the DMA operation. Tested-by: Linus Walleij Signed-off-by: Russell King

ARM: 6307/1: mmci: allow the card detect GPIO value not to be inverted

2010-08-26T18:54:27Z

On some platforms, the GPIO value from the gpio_cd pin doesn't need to be inverted to get it active high. Add a cd_invert platform data parameter and change existing platforms using GPIO for CD (only Realview) to enable it. Acked-by: Linus Walleij Signed-off-by: Rabin Vincent Signed-off-by: Russell King

ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback

2010-07-29T14:39:05Z

Platforms may have some external power control which need to be controlled from board specific code. Rename the translate_vdd() callback to vdd_handler() and pass it the power mode. Acked-by: Linus Walleij Signed-off-by: Rabin Vincent Signed-off-by: Russell King

ARM: 6033/1: ARM: MMCI: pass max frequency from platform

2010-04-14T15:08:18Z

This introduce the field f_max into the mmci_platform_data, making it possible to pass in a desired block clocking frequency from a board configuration. This is often more desirable than using a module parameter. We keep the module parameter as a fallback as well as the default frequency specified for this parameter if a parameter is not provided. This also adds some kerneldoc style documentation to the platform data struct in mmci.h. Signed-off-by: Linus Walleij Signed-off-by: Russell King

ARM: 5720/1: Move MMCI header to amba include dir

2009-09-22T19:49:04Z

This moves the mmci platform data definition struct away from arch/arm/include/asm/mach/mmc.h into the more proper place among the other primecells in include/linux/amba/mmci.h and at the same time renames it to "mmci.h", and also the struct in this file confusingly named mmc_platform_data has been renamed mmci_platform_data for clarity. Cc: Catalin Marinas Signed-off-by: Linus Walleij Signed-off-by: Russell King