user/sven/linux.git/include/linux/bcma, branch v3.12.43

bcma: make bcma_core_pci_{up,down}() callable from atomic context

2013-09-26T18:02:33Z

This patch removes the bcma_core_pci_power_save() call from the bcma_core_pci_{up,down}() functions as it tries to schedule thus requiring to call them from non-atomic context. The function bcma_core_pci_power_save() is now exported so the calling module can explicitly use it in non-atomic context. This fixes the 'scheduling while atomic' issue reported by Tod Jackson and Joe Perches. [ 13.210710] BUG: scheduling while atomic: dhcpcd/1800/0x00000202 [ 13.210718] Modules linked in: brcmsmac nouveau coretemp kvm_intel kvm cordic brcmutil bcma dell_wmi atl1c ttm mxm_wmi wmi [ 13.210756] CPU: 2 PID: 1800 Comm: dhcpcd Not tainted 3.11.0-wl #1 [ 13.210762] Hardware name: Alienware M11x R2/M11x R2, BIOS A04 11/23/2010 [ 13.210767] ffff880177c92c40 ffff880170fd1948 ffffffff8169af5b 0000000000000007 [ 13.210777] ffff880170fd1ab0 ffff880170fd1958 ffffffff81697ee2 ffff880170fd19d8 [ 13.210785] ffffffff816a19f5 00000000000f4240 000000000000d080 ffff880170fd1fd8 [ 13.210794] Call Trace: [ 13.210813] [] dump_stack+0x4f/0x84 [ 13.210826] [] __schedule_bug+0x43/0x51 [ 13.210837] [] __schedule+0x6e5/0x810 [ 13.210845] [] schedule+0x24/0x70 [ 13.210855] [] schedule_hrtimeout_range_clock+0x10c/0x150 [ 13.210867] [] ? update_rmtp+0x60/0x60 [ 13.210877] [] ? hrtimer_start_range_ns+0xf/0x20 [ 13.210887] [] schedule_hrtimeout_range+0xe/0x10 [ 13.210897] [] usleep_range+0x3b/0x40 [ 13.210910] [] bcma_pcie_mdio_set_phy.isra.3+0x4f/0x80 [bcma] [ 13.210921] [] bcma_pcie_mdio_write.isra.4+0xbf/0xd0 [bcma] [ 13.210932] [] bcma_pcie_mdio_writeread.isra.6.constprop.13+0x18/0x30 [bcma] [ 13.210942] [] bcma_core_pci_power_save+0x3e/0x80 [bcma] [ 13.210953] [] bcma_core_pci_up+0x2d/0x60 [bcma] [ 13.210975] [] brcms_c_up+0xfc/0x430 [brcmsmac] [ 13.210989] [] brcms_up+0x1d/0x20 [brcmsmac] [ 13.211003] [] brcms_ops_start+0x298/0x340 [brcmsmac] [ 13.211020] [] ? cfg80211_netdev_notifier_call+0xd2/0x5f0 [ 13.211030] [] ? packet_notifier+0xad/0x1d0 [ 13.211064] [] ieee80211_do_open+0x325/0xf80 [ 13.211076] [] ? __raw_notifier_call_chain+0x9/0x10 [ 13.211086] [] ieee80211_open+0x71/0x80 [ 13.211101] [] __dev_open+0x87/0xe0 [ 13.211109] [] __dev_change_flags+0x9c/0x180 [ 13.211117] [] dev_change_flags+0x23/0x70 [ 13.211127] [] devinet_ioctl+0x5b8/0x6a0 [ 13.211136] [] inet_ioctl+0x75/0x90 [ 13.211147] [] sock_do_ioctl+0x2b/0x70 [ 13.211155] [] sock_ioctl+0x71/0x2a0 [ 13.211169] [] do_vfs_ioctl+0x87/0x520 [ 13.211180] [] ? ____fput+0x9/0x10 [ 13.211198] [] ? task_work_run+0x9c/0xd0 [ 13.211202] [] SyS_ioctl+0x91/0xb0 [ 13.211208] [] system_call_fastpath+0x16/0x1b [ 13.211217] NOHZ: local_softirq_pending 202 The issue was introduced in v3.11 kernel by following commit: commit aa51e598d04c6acf5477934cd6383f5a17ce9029 Author: Hauke Mehrtens Date: Sat Aug 24 00:32:31 2013 +0200 brcmsmac: use bcma PCIe up and down functions replace the calls to bcma_core_pci_extend_L1timer() by calls to the newly introduced bcma_core_pci_ip() and bcma_core_pci_down() Signed-off-by: Hauke Mehrtens Cc: Arend van Spriel Signed-off-by: John W. Linville This fix has been discussed with Hauke Mehrtens [1] selection option 3) and is intended for v3.12. Ref: [1] http://mid.gmane.org/5239B12D.3040206@hauke-m.de Cc: # 3.11.x Cc: Tod Jackson Cc: Joe Perches Cc: Rafal Milecki Cc: Hauke Mehrtens Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville

bcma: add bcma_core_pci_power_save()

2013-08-26T18:09:03Z

This enables or disables power saving on the PCIe bus when the wifi is in operation or not. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville

bcma: do not export bcma_core_pci_extend_L1timer()

2013-08-26T18:09:03Z

This is not called any more, do not export it. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville

bcma: add method to power up and down the PCIe core by wifi driver

2013-08-26T18:09:02Z

The wifi driver should tell the PCIe core that it is now in operation so that some workarounds can be applied and the power state is changed. This should replace the call to bcma_core_pci_extend_L1timer by the brcmsmac driver. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville

bcma: add constants for new ARM based SoCs

2013-07-22T20:54:40Z

These are the chipIDs of some ARM based SoCs from the BCM47xx line. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville

bcma: add some more core names

2013-07-22T20:54:39Z

These cores were found on a BCM4708 (chipid 53010), this is a ARM SoC with two Cortex A9 cores. bcma: bus0: Found chip with id 0xCF12, rev 0x00 and package 0x02 bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0) bcma: bus0: Core 1 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0) bcma: bus0: Core 2 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x04, class 0x0) bcma: bus0: Core 6 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) bcma: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0) bcma: bus0: Core 8 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0) bcma: bus0: Core 9 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0) bcma: bus0: Core 10 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0) bcma: bus0: Core 11 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0) bcma: bus0: Core 12 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0) bcma: bus0: Core 13 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0) bcma: bus0: Core 14 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0) bcma: bus0: Core 15 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0) bcma: bus0: Core 16 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0) Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville

bcma: add support for BCM43142

2013-06-27T17:42:16Z

Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

bcma: add more core IDs

2013-05-17T18:31:05Z

PCIe and ARM CR4 cores were found on 14e4:43b1 AKA BCM4352. Reported-by: Gabriel Thörnblad Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville

brcmfmac: setup SDIO reset behavior

2013-04-12T18:27:55Z

Set device in a manner that SDIO I/O card reset will lead to WLAN backplane and PMU state reset. Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky (Zhenhui) Lin Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville

brcmfmac: add support for dongle ARM CR4 core

2013-04-12T18:27:54Z

Newer WiFi chip use ARM CR4 core to achieve higher performance. Add necessary code for host driver in order to support CR4 core. Reviewed-by: Arend van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville