user/sven/linux.git/include/linux/blkdev.h, branch v3.4.40

Fix blkdev.h build errors when BLOCK=n

2012-05-14T06:29:23Z

I see builds failing with: CC [M] drivers/mmc/host/dw_mmc.o In file included from drivers/mmc/host/dw_mmc.c:15: include/linux/blkdev.h:1404: warning: 'struct task_struct' declared inside parameter list include/linux/blkdev.h:1404: warning: its scope is only this definition or declaration, which is probably not what you want include/linux/blkdev.h:1408: warning: 'struct task_struct' declared inside parameter list include/linux/blkdev.h:1413: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'blk_needs_flush_plug' make[4]: *** [drivers/mmc/host/dw_mmc.o] Error 1 This is because dw_mmc.c includes linux/blkdev.h as the very first file, and when CONFIG_BLOCK=n, blkdev.h omits all includes. As it requires linux/sched.h even when CONFIG_BLOCK=n, move this out of the #ifdef. Signed-off-by: Russell King Signed-off-by: Jens Axboe

block: use lockdep_assert_held for queue locking

2012-03-30T10:33:28Z

Instead of an ugly open coded variant. Cc: axboe@kernel.dk Signed-off-by: Andi Kleen Signed-off-by: Jens Axboe

block: strip out locking optimization in put_io_context()

2012-02-07T06:51:30Z

put_io_context() performed a complex trylock dancing to avoid deferring ioc release to workqueue. It was also broken on UP because trylock was always assumed to succeed which resulted in unbalanced preemption count. While there are ways to fix the UP breakage, even the most pathological microbench (forced ioc allocation and tight fork/exit loop) fails to show any appreciable performance benefit of the optimization. Strip it out. If there turns out to be workloads which are affected by this change, simpler optimization from the discussion thread can be applied later. Signed-off-by: Tejun Heo LKML-Reference: <1328514611.21268.66.camel@sli10-conroe> Signed-off-by: Jens Axboe

Merge branch 'for-3.3/core' of git://git.kernel.dk/linux-block

2012-01-15T20:24:45Z

* 'for-3.3/core' of git://git.kernel.dk/linux-block: (37 commits) Revert "block: recursive merge requests" block: Stop using macro stubs for the bio data integrity calls blockdev: convert some macros to static inlines fs: remove unneeded plug in mpage_readpages() block: Add BLKROTATIONAL ioctl block: Introduce blk_set_stacking_limits function block: remove WARN_ON_ONCE() in exit_io_context() block: an exiting task should be allowed to create io_context block: ioc_cgroup_changed() needs to be exported block: recursive merge requests block, cfq: fix empty queue crash caused by request merge block, cfq: move icq creation and rq->elv.icq association to block core block, cfq: restructure io_cq creation path for io_context interface cleanup block, cfq: move io_cq exit/release to blk-ioc.c block, cfq: move icq cache management to block core block, cfq: move io_cq lookup to blk-ioc.c block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq block, cfq: reorganize cfq_io_context into generic and cfq specific parts block: remove elevator_queue->ops block: reorder elevator switch sequence ... Fix up conflicts in: - block/blk-cgroup.c Switch from can_attach_task to can_attach - block/cfq-iosched.c conflict with now removed cic index changes (we now use q->id instead)

block: fail SCSI passthrough ioctls on partition devices

2012-01-14T23:07:24Z

Linux allows executing the SG_IO ioctl on a partition or LVM volume, and will pass the command to the underlying block device. This is well-known, but it is also a large security problem when (via Unix permissions, ACLs, SELinux or a combination thereof) a program or user needs to be granted access only to part of the disk. This patch lets partitions forward a small set of harmless ioctls; others are logged with printk so that we can see which ioctls are actually sent. In my tests only CDROM_GET_CAPABILITY actually occurred. Of course it was being sent to a (partition on a) hard disk, so it would have failed with ENOTTY and the patch isn't changing anything in practice. Still, I'm treating it specially to avoid spamming the logs. In principle, this restriction should include programs running with CAP_SYS_RAWIO. If for example I let a program access /dev/sda2 and /dev/sdb, it still should not be able to read/write outside the boundaries of /dev/sda2 independent of the capabilities. However, for now programs with CAP_SYS_RAWIO will still be allowed to send the ioctls. Their actions will still be logged. This patch does not affect the non-libata IDE driver. That driver however already tests for bd != bd->bd_contains before issuing some ioctl; it could be restricted further to forbid these ioctls even for programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO. Cc: linux-scsi@vger.kernel.org Cc: Jens Axboe Cc: James Bottomley Signed-off-by: Paolo Bonzini [ Make it also print the command name when warning - Linus ] Signed-off-by: Linus Torvalds

block: add and use scsi_blk_cmd_ioctl

2012-01-14T23:07:24Z

Introduce a wrapper around scsi_cmd_ioctl that takes a block device. The function will then be enhanced to detect partition block devices and, in that case, subject the ioctls to whitelisting. Cc: linux-scsi@vger.kernel.org Cc: Jens Axboe Cc: James Bottomley Signed-off-by: Paolo Bonzini Signed-off-by: Linus Torvalds

blockdev: convert some macros to static inlines

2012-01-12T08:19:54Z

We prefer to program in C rather than preprocessor and it fixes this warning when CONFIG_BLK_DEV_INTEGRITY is not set: drivers/md/dm-table.c: In function 'dm_table_set_integrity': drivers/md/dm-table.c:1285:3: warning: statement with no effect [-Wunused-value] Signed-off-by: Stephen Rothwell Signed-off-by: Jens Axboe

block: Introduce blk_set_stacking_limits function

2012-01-11T15:27:11Z

Stacking driver queue limits are typically bounded exclusively by the capabilities of the low level devices, not by the stacking driver itself. This patch introduces blk_set_stacking_limits() which has more liberal metrics than the default queue limits function. This allows us to inherit topology parameters from bottom devices without manually tweaking the default limits in each driver prior to calling the stacking function. Since there is now a clear distinction between stacking and low-level devices, blk_set_default_limits() has been modified to carry the more conservative values that we used to manually set in blk_queue_make_request(). Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Signed-off-by: Jens Axboe

block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq

2011-12-13T23:33:41Z

Most of icq management is about to be moved out of cfq into blk-ioc. This patch prepares for it. * Move cfqd->icq_list to request_queue->icq_list * Make request explicitly point to icq instead of through elevator private data. ->elevator_private[3] is replaced with sub struct elv which contains icq pointer and priv[2]. cfq is updated accordingly. * Meaningless clearing of ->elevator_private[0] removed from elv_set_request(). At that point in code, the field was guaranteed to be %NULL anyway. This patch doesn't introduce any functional change. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe

block, cfq: unlink cfq_io_context's immediately

2011-12-13T23:33:39Z

cic is association between io_context and request_queue. A cic is linked from both ioc and q and should be destroyed when either one goes away. As ioc and q both have their own locks, locking becomes a bit complex - both orders work for removal from one but not from the other. Currently, cfq tries to circumvent this locking order issue with RCU. ioc->lock nests inside queue_lock but the radix tree and cic's are also protected by RCU allowing either side to walk their lists without grabbing lock. This rather unconventional use of RCU quickly devolves into extremely fragile convolution. e.g. The following is from cfqd going away too soon after ioc and q exits raced. general protection fault: 0000 [#1] PREEMPT SMP CPU 2 Modules linked in: [ 88.503444] Pid: 599, comm: hexdump Not tainted 3.1.0-rc10-work+ #158 Bochs Bochs RIP: 0010:[] [] cfq_exit_single_io_context+0x58/0xf0 ... Call Trace: [] call_for_each_cic+0x5a/0x90 [] cfq_exit_io_context+0x15/0x20 [] exit_io_context+0x100/0x140 [] do_exit+0x579/0x850 [] do_group_exit+0x5b/0xd0 [] sys_exit_group+0x17/0x20 [] system_call_fastpath+0x16/0x1b The only real hot path here is cic lookup during request initialization and avoiding extra locking requires very confined use of RCU. This patch makes cic removal from both ioc and request_queue perform double-locking and unlink immediately. * From q side, the change is almost trivial as ioc->lock nests inside queue_lock. It just needs to grab each ioc->lock as it walks cic_list and unlink it. * From ioc side, it's a bit more difficult because of inversed lock order. ioc needs its lock to walk its cic_list but can't grab the matching queue_lock and needs to perform unlock-relock dancing. Unlinking is now wholly done from put_io_context() and fast path is optimized by using the queue_lock the caller already holds, which is by far the most common case. If the ioc accessed multiple devices, it tries with trylock. In unlikely cases of fast path failure, it falls back to full double-locking dance from workqueue. Double-locking isn't the prettiest thing in the world but it's *far* simpler and more understandable than RCU trick without adding any meaningful overhead. This still leaves a lot of now unnecessary RCU logics. Future patches will trim them. -v2: Vivek pointed out that cic->q was being dereferenced after cic->release() was called. Updated to use local variable @this_q instead. Signed-off-by: Tejun Heo Cc: Vivek Goyal Signed-off-by: Jens Axboe