user/sven/linux.git/include/linux/blkdev.h, branch v4.20.11

block: Introduce blk_revalidate_disk_zones()

2018-10-25T17:17:40Z

Drivers exposing zoned block devices have to initialize and maintain correctness (i.e. revalidate) of the device zone bitmaps attached to the device request queue (seq_zones_bitmap and seq_zones_wlock). To simplify coding this, introduce a generic helper function blk_revalidate_disk_zones() suitable for most (and likely all) cases. This new function always update the seq_zones_bitmap and seq_zones_wlock bitmaps as well as the queue nr_zones field when called for a disk using a request based queue. For a disk using a BIO based queue, only the number of zones is updated since these queues do not have schedulers and so do not need the zone bitmaps. With this change, the zone bitmap initialization code in sd_zbc.c can be replaced with a call to this function in sd_zbc_read_zones(), which is called from the disk revalidate block operation method. A call to blk_revalidate_disk_zones() is also added to the null_blk driver for devices created with the zoned mode enabled. Finally, to ensure that zoned devices created with dm-linear or dm-flakey expose the correct number of zones through sysfs, a call to blk_revalidate_disk_zones() is added to dm_table_set_restrictions(). The zone bitmaps allocated and initialized with blk_revalidate_disk_zones() are freed automatically from __blk_release_queue() using the block internal function blk_queue_free_zone_bitmaps(). Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Reviewed-by: Mike Snitzer Signed-off-by: Damien Le Moal Signed-off-by: Jens Axboe

block: add a report_zones method

2018-10-25T17:17:40Z

Dispatching a report zones command through the request queue is a major pain due to the command reply payload rewriting necessary. Given that blkdev_report_zones() is executing everything synchronously, implement report zones as a block device file operation instead, allowing major simplification of the code in many places. sd, null-blk, dm-linear and dm-flakey being the only block device drivers supporting exposing zoned block devices, these drivers are modified to provide the device side implementation of the report_zones() block device file operation. For device mappers, a new report_zones() target type operation is defined so that the upper block layer calls blkdev_report_zones() can be propagated down to the underlying devices of the dm targets. Implementation for this new operation is added to the dm-linear and dm-flakey targets. Reviewed-by: Hannes Reinecke Signed-off-by: Christoph Hellwig [Damien] * Changed method block_device argument to gendisk * Various bug fixes and improvements * Added support for null_blk, dm-linear and dm-flakey. Reviewed-by: Martin K. Petersen Reviewed-by: Mike Snitzer Signed-off-by: Damien Le Moal Signed-off-by: Jens Axboe

block: Expose queue nr_zones in sysfs

2018-10-25T17:17:40Z

Expose through sysfs the nr_zones field of struct request_queue. Exposing this value helps in debugging disk issues as well as facilitating scripts based use of the disk (e.g. blktests). For zoned block devices, the nr_zones field indicates the total number of zones of the device calculated using the known disk capacity and zone size. This number of zones is always 0 for regular block devices. Since nr_zones is defined conditionally with CONFIG_BLK_DEV_ZONED, introduce the blk_queue_nr_zones() function to return the correct value for any device, regardless if CONFIG_BLK_DEV_ZONED is set. Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Damien Le Moal Signed-off-by: Jens Axboe

block: Introduce blkdev_nr_zones() helper

2018-10-25T17:17:40Z

Introduce the blkdev_nr_zones() helper function to get the total number of zones of a zoned block device. This number is always 0 for a regular block device (q->limits.zoned == BLK_ZONED_NONE case). Replace hard-coded number of zones calculation in dmz_get_zoned_device() with a call to this helper. Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Signed-off-by: Damien Le Moal Signed-off-by: Jens Axboe

Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-10-25T13:50:48Z

Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...

block: Add PCI P2P flag for request queue

2018-10-17T17:18:19Z

Add QUEUE_FLAG_PCI_P2P, meaning a driver's request queue supports targeting P2P memory. This will be used by P2P providers and orchestrators (in subsequent patches) to ensure block devices can support P2P memory before submitting P2P-backed pages to submit_bio(). Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas Reviewed-by: Christoph Hellwig Acked-by: Jens Axboe

block: describe difference between flags IO_STAT and STATS

2018-10-11T17:04:21Z

This adds reasonable comments, but they definitely needs better names. Signed-off-by: Konstantin Khlebnikov Signed-off-by: Jens Axboe

Merge tag 'v4.19-rc6' into for-4.20/block

2018-10-01T14:58:57Z

Merge -rc6 in, for two reasons: 1) Resolve a trivial conflict in the blk-mq-tag.c documentation 2) A few important regression fixes went into upstream directly, so they aren't in the 4.20 branch. Signed-off-by: Jens Axboe * tag 'v4.19-rc6': (780 commits) Linux 4.19-rc6 MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c cpufreq: qcom-kryo: Fix section annotations perf/core: Add sanity check to deal with pinned event failure xen/blkfront: correct purging of persistent grants Revert "xen/blkfront: When purging persistent grants, keep them in the buffer" selftests/powerpc: Fix Makefiles for headers_install change blk-mq: I/O and timer unplugs are inverted in blktrace dax: Fix deadlock in dax_lock_mapping_entry() x86/boot: Fix kexec booting failure in the SEV bit detection code bcache: add separate workqueue for journal_write to avoid deadlock drm/amd/display: Fix Edid emulation for linux drm/amd/display: Fix Vega10 lightup on S3 resume drm/amdgpu: Fix vce work queue was not cancelled when suspend Revert "drm/panel: Add device_link from panel device to DRM device" xen/blkfront: When purging persistent grants, keep them in the buffer clocksource/drivers/timer-atmel-pit: Properly handle error cases block: fix deadline elevator drain for zoned block devices ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set ... Signed-off-by: Jens Axboe

block, scsi: Change the preempt-only flag into a counter

2018-09-26T21:11:28Z

The RQF_PREEMPT flag is used for three purposes: - In the SCSI core, for making sure that power management requests are executed even if a device is in the "quiesced" state. - For domain validation by SCSI drivers that use the parallel port. - In the IDE driver, for IDE preempt requests. Rename "preempt-only" into "pm-only" because the primary purpose of this mode is power management. Since the power management core may but does not have to resume a runtime suspended device before performing system-wide suspend and since a later patch will set "pm-only" mode as long as a block device is runtime suspended, make it possible to set "pm-only" mode from more than one context. Since with this change scsi_device_quiesce() is no longer idempotent, make that function return early if it is called for a quiesced queue. Signed-off-by: Bart Van Assche Acked-by: Martin K. Petersen Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Reviewed-by: Ming Lei Cc: Jianchao Wang Cc: Johannes Thumshirn Cc: Alan Stern Signed-off-by: Jens Axboe

block: Move power management code into a new source file

2018-09-26T21:11:28Z

Move the code for runtime power management from blk-core.c into the new source file blk-pm.c. Move the corresponding declarations from into . For CONFIG_PM=n, leave out the declarations of the functions that are not used in that mode. This patch not only reduces the number of #ifdefs in the block layer core code but also reduces the size of header file and hence should help to reduce the build time of the Linux kernel if CONFIG_PM is not defined. Signed-off-by: Bart Van Assche Reviewed-by: Ming Lei Reviewed-by: Christoph Hellwig Cc: Jianchao Wang Cc: Hannes Reinecke Cc: Johannes Thumshirn Cc: Alan Stern Signed-off-by: Jens Axboe