user/sven/linux.git/include/linux/bpf-cgroup.h, branch v5.10.221

bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE

2023-07-27T06:43:37Z

[ Upstream commit 9cacf81f8161111db25f98e78a7a0e32ae142b3f ] Add custom implementation of getsockopt hook for TCP_ZEROCOPY_RECEIVE. We skip generic hooks for TCP_ZEROCOPY_RECEIVE and have a custom call in do_tcp_getsockopt using the on-stack data. This removes 3% overhead for locking/unlocking the socket. Without this patch: 3.38% 0.07% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt | --3.30%--__cgroup_bpf_run_filter_getsockopt | --0.81%--__kmalloc With the patch applied: 0.52% 0.12% tcp_mmap [kernel.kallsyms] [k] __cgroup_bpf_run_filter_getsockopt_kern Note, exporting uapi/tcp.h requires removing netinet/tcp.h from test_progs.h because those headers have confliciting definitions. Signed-off-by: Stanislav Fomichev Signed-off-by: Alexei Starovoitov Acked-by: Martin KaFai Lau Link: https://lore.kernel.org/bpf/20210115163501.805133-2-sdf@google.com Stable-dep-of: 2598619e012c ("sctp: add bpf_bypass_getsockopt proto callback") Signed-off-by: Sasha Levin

bpf: Fix potentially incorrect results with bpf_get_local_storage()

2021-09-03T08:09:31Z

commit a2baf4e8bb0f306fbed7b5e6197c02896a638ab5 upstream. Commit b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper") fixed a bug for bpf_get_local_storage() helper so different tasks won't mess up with each other's percpu local storage. The percpu data contains 8 slots so it can hold up to 8 contexts (same or different tasks), for 8 different program runs, at the same time. This in general is sufficient. But our internal testing showed the following warning multiple times: [...] warning: WARNING: CPU: 13 PID: 41661 at include/linux/bpf-cgroup.h:193 __cgroup_bpf_run_filter_sock_ops+0x13e/0x180 RIP: 0010:__cgroup_bpf_run_filter_sock_ops+0x13e/0x180 tcp_call_bpf.constprop.99+0x93/0xc0 tcp_conn_request+0x41e/0xa50 ? tcp_rcv_state_process+0x203/0xe00 tcp_rcv_state_process+0x203/0xe00 ? sk_filter_trim_cap+0xbc/0x210 ? tcp_v6_inbound_md5_hash.constprop.41+0x44/0x160 tcp_v6_do_rcv+0x181/0x3e0 tcp_v6_rcv+0xc65/0xcb0 ip6_protocol_deliver_rcu+0xbd/0x450 ip6_input_finish+0x11/0x20 ip6_input+0xb5/0xc0 ip6_sublist_rcv_finish+0x37/0x50 ip6_sublist_rcv+0x1dc/0x270 ipv6_list_rcv+0x113/0x140 __netif_receive_skb_list_core+0x1a0/0x210 netif_receive_skb_list_internal+0x186/0x2a0 gro_normal_list.part.170+0x19/0x40 napi_complete_done+0x65/0x150 mlx5e_napi_poll+0x1ae/0x680 __napi_poll+0x25/0x120 net_rx_action+0x11e/0x280 __do_softirq+0xbb/0x271 irq_exit_rcu+0x97/0xa0 common_interrupt+0x7f/0xa0 asm_common_interrupt+0x1e/0x40 RIP: 0010:bpf_prog_1835a9241238291a_tw_egress+0x5/0xbac ? __cgroup_bpf_run_filter_skb+0x378/0x4e0 ? do_softirq+0x34/0x70 ? ip6_finish_output2+0x266/0x590 ? ip6_finish_output+0x66/0xa0 ? ip6_output+0x6c/0x130 ? ip6_xmit+0x279/0x550 ? ip6_dst_check+0x61/0xd0 [...] Using drgn [0] to dump the percpu buffer contents showed that on this CPU slot 0 is still available, but slots 1-7 are occupied and those tasks in slots 1-7 mostly don't exist any more. So we might have issues in bpf_cgroup_storage_unset(). Further debugging confirmed that there is a bug in bpf_cgroup_storage_unset(). Currently, it tries to unset "current" slot with searching from the start. So the following sequence is possible: 1. A task is running and claims slot 0 2. Running BPF program is done, and it checked slot 0 has the "task" and ready to reset it to NULL (not yet). 3. An interrupt happens, another BPF program runs and it claims slot 1 with the *same* task. 4. The unset() in interrupt context releases slot 0 since it matches "task". 5. Interrupt is done, the task in process context reset slot 0. At the end, slot 1 is not reset and the same process can continue to occupy slots 2-7 and finally, when the above step 1-5 is repeated again, step 3 BPF program won't be able to claim an empty slot and a warning will be issued. To fix the issue, for unset() function, we should traverse from the last slot to the first. This way, the above issue can be avoided. The same reverse traversal should also be done in bpf_get_local_storage() helper itself. Otherwise, incorrect local storage may be returned to BPF program. [0] https://github.com/osandov/drgn Fixes: b910eaaaa4b8 ("bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper") Signed-off-by: Yonghong Song Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20210810010413.1976277-1-yhs@fb.com Signed-off-by: Greg Kroah-Hartman

bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper

2021-09-03T08:09:21Z

commit b910eaaaa4b89976ef02e5d6448f3f73dc671d91 upstream. Jiri Olsa reported a bug ([1]) in kernel where cgroup local storage pointer may be NULL in bpf_get_local_storage() helper. There are two issues uncovered by this bug: (1). kprobe or tracepoint prog incorrectly sets cgroup local storage before prog run, (2). due to change from preempt_disable to migrate_disable, preemption is possible and percpu storage might be overwritten by other tasks. This issue (1) is fixed in [2]. This patch tried to address issue (2). The following shows how things can go wrong: task 1: bpf_cgroup_storage_set() for percpu local storage preemption happens task 2: bpf_cgroup_storage_set() for percpu local storage preemption happens task 1: run bpf program task 1 will effectively use the percpu local storage setting by task 2 which will be either NULL or incorrect ones. Instead of just one common local storage per cpu, this patch fixed the issue by permitting 8 local storages per cpu and each local storage is identified by a task_struct pointer. This way, we allow at most 8 nested preemption between bpf_cgroup_storage_set() and bpf_cgroup_storage_unset(). The percpu local storage slot is released (calling bpf_cgroup_storage_unset()) by the same task after bpf program finished running. bpf_test_run() is also fixed to use the new bpf_cgroup_storage_set() interface. The patch is tested on top of [2] with reproducer in [1]. Without this patch, kernel will emit error in 2-3 minutes. With this patch, after one hour, still no error. [1] https://lore.kernel.org/bpf/CAKH8qBuXCfUz=w8L+Fj74OaUpbosO29niYwTki7e3Ag044_aww@mail.gmail.com/T [2] https://lore.kernel.org/bpf/20210309185028.3763817-1-yhs@fb.com Signed-off-by: Yonghong Song Signed-off-by: Alexei Starovoitov Acked-by: Roman Gushchin Link: https://lore.kernel.org/bpf/20210323055146.3334476-1-yhs@fb.com Cc: # 5.10.x Signed-off-by: Stanislav Fomichev Signed-off-by: Sasha Levin

Merge branch 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2020-10-22T16:59:21Z

Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode

sysctl: Convert to iter interfaces

2020-09-09T02:20:39Z

Using the read_iter/write_iter interfaces allows for in-kernel users to set sysctls without using set_fs(). Also, the buffer is a string, so give it the real type of 'char *', not void *. [AV: Christoph's fixup folded in] Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro

bpf: tcp: Allow bpf prog to write and parse TCP header option

2020-08-24T21:35:00Z

[ Note: The TCP changes here is mainly to implement the bpf pieces into the bpf_skops_*() functions introduced in the earlier patches. ] The earlier effort in BPF-TCP-CC allows the TCP Congestion Control algorithm to be written in BPF. It opens up opportunities to allow a faster turnaround time in testing/releasing new congestion control ideas to production environment. The same flexibility can be extended to writing TCP header option. It is not uncommon that people want to test new TCP header option to improve the TCP performance. Another use case is for data-center that has a more controlled environment and has more flexibility in putting header options for internal only use. For example, we want to test the idea in putting maximum delay ACK in TCP header option which is similar to a draft RFC proposal [1]. This patch introduces the necessary BPF API and use them in the TCP stack to allow BPF_PROG_TYPE_SOCK_OPS program to parse and write TCP header options. It currently supports most of the TCP packet except RST. Supported TCP header option: ─────────────────────────── This patch allows the bpf-prog to write any option kind. Different bpf-progs can write its own option by calling the new helper bpf_store_hdr_opt(). The helper will ensure there is no duplicated option in the header. By allowing bpf-prog to write any option kind, this gives a lot of flexibility to the bpf-prog. Different bpf-prog can write its own option kind. It could also allow the bpf-prog to support a recently standardized option on an older kernel. Sockops Callback Flags: ────────────────────── The bpf program will only be called to parse/write tcp header option if the following newly added callback flags are enabled in tp->bpf_sock_ops_cb_flags: BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG A few words on the PARSE CB flags. When the above PARSE CB flags are turned on, the bpf-prog will be called on packets received at a sk that has at least reached the ESTABLISHED state. The parsing of the SYN-SYNACK-ACK will be discussed in the "3 Way HandShake" section. The default is off for all of the above new CB flags, i.e. the bpf prog will not be called to parse or write bpf hdr option. There are details comment on these new cb flags in the UAPI bpf.h. sock_ops->skb_data and bpf_load_hdr_opt() ───────────────────────────────────────── sock_ops->skb_data and sock_ops->skb_data_end covers the whole TCP header and its options. They are read only. The new bpf_load_hdr_opt() helps to read a particular option "kind" from the skb_data. Please refer to the comment in UAPI bpf.h. It has details on what skb_data contains under different sock_ops->op. 3 Way HandShake ─────────────── The bpf-prog can learn if it is sending SYN or SYNACK by reading the sock_ops->skb_tcp_flags. * Passive side When writing SYNACK (i.e. sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB), the received SYN skb will be available to the bpf prog. The bpf prog can use the SYN skb (which may carry the header option sent from the remote bpf prog) to decide what bpf header option should be written to the outgoing SYNACK skb. The SYN packet can be obtained by getsockopt(TCP_BPF_SYN*). More on this later. Also, the bpf prog can learn if it is in syncookie mode (by checking sock_ops->args[0] == BPF_WRITE_HDR_TCP_SYNACK_COOKIE). The bpf prog can store the received SYN pkt by using the existing bpf_setsockopt(TCP_SAVE_SYN). The example in a later patch does it. [ Note that the fullsock here is a listen sk, bpf_sk_storage is not very useful here since the listen sk will be shared by many concurrent connection requests. Extending bpf_sk_storage support to request_sock will add weight to the minisock and it is not necessary better than storing the whole ~100 bytes SYN pkt. ] When the connection is established, the bpf prog will be called in the existing PASSIVE_ESTABLISHED_CB callback. At that time, the bpf prog can get the header option from the saved syn and then apply the needed operation to the newly established socket. The later patch will use the max delay ack specified in the SYN header and set the RTO of this newly established connection as an example. The received ACK (that concludes the 3WHS) will also be available to the bpf prog during PASSIVE_ESTABLISHED_CB through the sock_ops->skb_data. It could be useful in syncookie scenario. More on this later. There is an existing getsockopt "TCP_SAVED_SYN" to return the whole saved syn pkt which includes the IP[46] header and the TCP header. A few "TCP_BPF_SYN*" getsockopt has been added to allow specifying where to start getting from, e.g. starting from TCP header, or from IP[46] header. The new getsockopt(TCP_BPF_SYN*) will also know where it can get the SYN's packet from: - (a) the just received syn (available when the bpf prog is writing SYNACK) and it is the only way to get SYN during syncookie mode. or - (b) the saved syn (available in PASSIVE_ESTABLISHED_CB and also other existing CB). The bpf prog does not need to know where the SYN pkt is coming from. The getsockopt(TCP_BPF_SYN*) will hide this details. Similarly, a flags "BPF_LOAD_HDR_OPT_TCP_SYN" is also added to bpf_load_hdr_opt() to read a particular header option from the SYN packet. * Fastopen Fastopen should work the same as the regular non fastopen case. This is a test in a later patch. * Syncookie For syncookie, the later example patch asks the active side's bpf prog to resend the header options in ACK. The server can use bpf_load_hdr_opt() to look at the options in this received ACK during PASSIVE_ESTABLISHED_CB. * Active side The bpf prog will get a chance to write the bpf header option in the SYN packet during WRITE_HDR_OPT_CB. The received SYNACK pkt will also be available to the bpf prog during the existing ACTIVE_ESTABLISHED_CB callback through the sock_ops->skb_data and bpf_load_hdr_opt(). * Turn off header CB flags after 3WHS If the bpf prog does not need to write/parse header options beyond the 3WHS, the bpf prog can clear the bpf_sock_ops_cb_flags to avoid being called for header options. Or the bpf-prog can select to leave the UNKNOWN_HDR_OPT_CB_FLAG on so that the kernel will only call it when there is option that the kernel cannot handle. [1]: draft-wang-tcpm-low-latency-opt-00 https://tools.ietf.org/html/draft-wang-tcpm-low-latency-opt-00 Signed-off-by: Martin KaFai Lau Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200820190104.2885895-1-kafai@fb.com

bpf: Make cgroup storages shared between programs on the same cgroup

2020-07-26T03:16:35Z

This change comes in several parts: One, the restriction that the CGROUP_STORAGE map can only be used by one program is removed. This results in the removal of the field 'aux' in struct bpf_cgroup_storage_map, and removal of relevant code associated with the field, and removal of now-noop functions bpf_free_cgroup_storage and bpf_cgroup_storage_release. Second, we permit a key of type u64 as the key to the map. Providing such a key type indicates that the map should ignore attach type when comparing map keys. However, for simplicity newly linked storage will still have the attach type at link time in its key struct. cgroup_storage_check_btf is adapted to accept u64 as the type of the key. Third, because the storages are now shared, the storages cannot be unconditionally freed on program detach. There could be two ways to solve this issue: * A. Reference count the usage of the storages, and free when the last program is detached. * B. Free only when the storage is impossible to be referred to again, i.e. when either the cgroup_bpf it is attached to, or the map itself, is freed. Option A has the side effect that, when the user detach and reattach a program, whether the program gets a fresh storage depends on whether there is another program attached using that storage. This could trigger races if the user is multi-threaded, and since nondeterminism in data races is evil, go with option B. The both the map and the cgroup_bpf now tracks their associated storages, and the storage unlink and free are removed from cgroup_bpf_detach and added to cgroup_bpf_release and cgroup_storage_map_free. The latter also new holds the cgroup_mutex to prevent any races with the former. Fourth, on attach, we reuse the old storage if the key already exists in the map, via cgroup_storage_lookup. If the storage does not exist yet, we create a new one, and publish it at the last step in the attach process. This does not create a race condition because for the whole attach the cgroup_mutex is held. We keep track of an array of new storages that was allocated and if the process fails only the new storages would get freed. Signed-off-by: YiFei Zhu Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/d5401c6106728a00890401190db40020a1f84ff1.1595565795.git.zhuyifei@google.com

bpf: Add BPF_CGROUP_INET_SOCK_RELEASE hook

2020-07-07T23:03:31Z

Sometimes it's handy to know when the socket gets freed. In particular, we'd like to try to use a smarter allocation of ports for bpf_bind and explore the possibility of limiting the number of SOCK_DGRAM sockets the process can have. Implement BPF_CGROUP_INET_SOCK_RELEASE hook that triggers on inet socket release. It triggers only for userspace sockets (not in-kernel ones) and therefore has the same semantics as the existing BPF_CGROUP_INET_SOCK_CREATE. Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20200706230128.4073544-2-sdf@google.com

bpf: Add get{peer, sock}name attach types for sock_addr

2020-05-19T18:32:04Z

As stated in 983695fa6765 ("bpf: fix unconnected udp hooks"), the objective for the existing cgroup connect/sendmsg/recvmsg/bind BPF hooks is to be transparent to applications. In Cilium we make use of these hooks [0] in order to enable E-W load balancing for existing Kubernetes service types for all Cilium managed nodes in the cluster. Those backends can be local or remote. The main advantage of this approach is that it operates as close as possible to the socket, and therefore allows to avoid packet-based NAT given in connect/sendmsg/recvmsg hooks we only need to xlate sock addresses. This also allows to expose NodePort services on loopback addresses in the host namespace, for example. As another advantage, this also efficiently blocks bind requests for applications in the host namespace for exposed ports. However, one missing item is that we also need to perform reverse xlation for inet{,6}_getname() hooks such that we can return the service IP/port tuple back to the application instead of the remote peer address. The vast majority of applications does not bother about getpeername(), but in a few occasions we've seen breakage when validating the peer's address since it returns unexpectedly the backend tuple instead of the service one. Therefore, this trivial patch allows to customise and adds a getpeername() as well as getsockname() BPF cgroup hook for both IPv4 and IPv6 in order to address this situation. Simple example: # ./cilium/cilium service list ID Frontend Service Type Backend 1 1.2.3.4:80 ClusterIP 1 => 10.0.0.10:80 Before; curl's verbose output example, no getpeername() reverse xlation: # curl --verbose 1.2.3.4 * Rebuilt URL to: 1.2.3.4/ * Trying 1.2.3.4... * TCP_NODELAY set * Connected to 1.2.3.4 (10.0.0.10) port 80 (#0) > GET / HTTP/1.1 > Host: 1.2.3.4 > User-Agent: curl/7.58.0 > Accept: */* [...] After; with getpeername() reverse xlation: # curl --verbose 1.2.3.4 * Rebuilt URL to: 1.2.3.4/ * Trying 1.2.3.4... * TCP_NODELAY set * Connected to 1.2.3.4 (1.2.3.4) port 80 (#0) > GET / HTTP/1.1 > Host: 1.2.3.4 > User-Agent: curl/7.58.0 > Accept: */* [...] Originally, I had both under a BPF_CGROUP_INET{4,6}_GETNAME type and exposed peer to the context similar as in inet{,6}_getname() fashion, but API-wise this is suboptimal as it always enforces programs having to test for ctx->peer which can easily be missed, hence BPF_CGROUP_INET{4,6}_GET{PEER,SOCK}NAME split. Similarly, the checked return code is on tnum_range(1, 1), but if a use case comes up in future, it can easily be changed to return an error code instead. Helper and ctx member access is the same as with connect/sendmsg/etc hooks. [0] https://github.com/cilium/cilium/blob/master/bpf/bpf_sock.c Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Acked-by: Andrii Nakryiko Acked-by: Andrey Ignatov Link: https://lore.kernel.org/bpf/61a479d759b2482ae3efb45546490bacd796a220.1589841594.git.daniel@iogearbox.net

bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link

2020-04-29T00:27:08Z

Add ability to fetch bpf_link details through BPF_OBJ_GET_INFO_BY_FD command. Also enhance show_fdinfo to potentially include bpf_link type-specific information (similarly to obj_info). Also introduce enum bpf_link_type stored in bpf_link itself and expose it in UAPI. bpf_link_tracing also now will store and return bpf_attach_type. Signed-off-by: Andrii Nakryiko Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20200429001614.1544-5-andriin@fb.com