user/sven/linux.git/include/linux/buffer_head.h, branch v4.14.53

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

fs/mpage.c: fix mpage_writepage() for pages with buffers

2017-10-13T23:18:33Z

When using FAT on a block device which supports rw_page, we can hit BUG_ON(!PageLocked(page)) in try_to_free_buffers(). This is because we call clean_buffers() after unlocking the page we've written. Introduce a new clean_page_buffers() which cleans all buffers associated with a page and call it from within bdev_write_page(). [akpm@linux-foundation.org: s/PAGE_SIZE/~0U/ per Linus and Matthew] Link: http://lkml.kernel.org/r/20171006211541.GA7409@bombadil.infradead.org Signed-off-by: Matthew Wilcox Reported-by: Toshi Kani Reported-by: OGAWA Hirofumi Tested-by: Toshi Kani Acked-by: Johannes Thumshirn Cc: Ross Zwisler Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

2017-07-10T17:51:53Z

Pull XFS updates from Darrick Wong: "Here are some changes for you for 4.13. For the most part it's fixes for bugs and deadlock problems, and preparation for online fsck in some future merge window. - Avoid quotacheck deadlocks - Fix transaction overflows when bunmapping fragmented files - Refactor directory readahead - Allow admin to configure if ASSERT is fatal - Improve transaction usage detail logging during overflows - Minor cleanups - Don't leak log items when the log shuts down - Remove double-underscore typedefs - Various preparation for online scrubbing - Introduce new error injection configuration sysfs knobs - Refactor dq_get_next to use extent map directly - Fix problems with iterating the page cache for unwritten data - Implement SEEK_{HOLE,DATA} via iomap - Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA - Don't use MAXPATHLEN to check on-disk symlink target lengths" * tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits) xfs: don't crash on unexpected holes in dir/attr btrees xfs: rename MAXPATHLEN to XFS_SYMLINK_MAXLEN xfs: fix contiguous dquot chunk iteration livelock xfs: Switch to iomap for SEEK_HOLE / SEEK_DATA vfs: Add iomap_seek_hole and iomap_seek_data helpers vfs: Add page_cache_seek_hole_data helper xfs: remove a whitespace-only line from xfs_fs_get_nextdqblk xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent xfs: Check for m_errortag initialization in xfs_errortag_test xfs: grab dquots without taking the ilock xfs: fix semicolon.cocci warnings xfs: Don't clear SGID when inheriting ACLs xfs: free cowblocks and retry on buffered write ENOSPC xfs: replace log_badcrc_factor knob with error injection tag xfs: convert drop_writes to use the errortag mechanism xfs: remove unneeded parameter from XFS_TEST_ERROR xfs: expose errortag knobs via sysfs xfs: make errortag a per-mountpoint structure xfs: free uncommitted transactions during log recovery xfs: don't allow bmap on rt files ...

buffer: set errors in mapping at the time that the error occurs

2017-07-06T11:02:21Z

I noticed on xfs that I could still sometimes get back an error on fsync on a fd that was opened after the error condition had been cleared. The problem is that the buffer code sets the write_io_error flag and then later checks that flag to set the error in the mapping. That flag perisists for quite a while however. If the file is later opened with O_TRUNC, the buffers will then be invalidated and the mapping's error set such that a subsequent fsync will return error. I think this is incorrect, as there was no writeback between the open and fsync. Add a new mark_buffer_write_io_error operation that sets the flag and the error in the mapping at the same time. Replace all calls to set_buffer_write_io_error with mark_buffer_write_io_error, and remove the places that check this flag in order to set the error in the mapping. This sets the error in the mapping earlier, at the time that it's first detected. Signed-off-by: Jeff Layton Reviewed-by: Jan Kara Reviewed-by: Carlos Maiolino

vfs: Add page_cache_seek_hole_data helper

2017-07-03T05:46:13Z

Both ext4 and xfs implement seeking for the next hole or piece of data in unwritten extents by scanning the page cache, and both versions share the same bug when iterating the buffers of a page: the start offset into the page isn't taken into account, so when a page fits more than two filesystem blocks, things will go wrong. For example, on a filesystem with a block size of 1k, the following command will fail: xfs_io -f -c "falloc 0 4k" \ -c "pwrite 1k 1k" \ -c "pwrite 3k 1k" \ -c "seek -a -r 0" foo In this example, neither lseek(fd, 1024, SEEK_HOLE) nor lseek(fd, 2048, SEEK_DATA) will return the correct result. Introduce a generic vfs helper for seeking in the page cache that gets this right. The next commits will replace the filesystem specific implementations. Signed-off-by: Andreas Gruenbacher [hch: dropped the export] Signed-off-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong

fs: remove _submit_bh()

2017-04-27T03:54:06Z

_submit_bh() allowed submitting a buffer_head for I/O using custom bio_flags. It used to be used by jbd to set BIO_SNAP_STABLE, introduced by commit 713685111774 ("mm: make snapshotting pages for stable writes a per-bio operation"). However, the code and flag has since been removed and no _submit_bh() users remain. These days, bio_flags are mostly used internally by the block layer to track the state of bio's. As such, it doesn't really make sense for filesystems to use them instead of op_flags when wanting special behavior for block requests. Therefore, remove _submit_bh() and trim the bio_flags argument from submit_bh_wbc(). Cc: Darrick J. Wong Signed-off-by: Eric Biggers Signed-off-by: Al Viro

mm: avoid returning VM_FAULT_RETRY from ->page_mkwrite handlers

2017-02-08T23:41:43Z

Some ->page_mkwrite handlers may return VM_FAULT_RETRY as its return code (GFS2 or Lustre can definitely do this). However VM_FAULT_RETRY from ->page_mkwrite is completely unhandled by the mm code and results in locking and writeably mapping the page which definitely is not what the caller wanted. Fix Lustre and block_page_mkwrite_ret() used by other filesystems (notably GFS2) to return VM_FAULT_NOPAGE instead which results in bailing out from the fault code, the CPU then retries the access, and we fault again effectively doing what the handler wanted. Link: http://lkml.kernel.org/r/20170203150729.15863-1-jack@suse.cz Signed-off-by: Jan Kara Reported-by: Al Viro Reviewed-by: Jinshan Xiong Cc: Matthew Wilcox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

fs: Remove unmap_underlying_metadata

2016-11-04T20:34:47Z

Nobody is using this function anymore. Remove it. Signed-off-by: Jan Kara Signed-off-by: Jens Axboe

fs: Add helper to clean bdev aliases under a bh and use it

2016-11-04T20:34:47Z

Add a helper function that clears buffer heads from a block device aliasing passed bh. Use this helper function from filesystems instead of the original unmap_underlying_metadata() to save some boiler plate code and also have a better name for the functionalily since it is not unmapping anything for a *long* time. Signed-off-by: Jan Kara Signed-off-by: Jens Axboe

fs: Provide function to unmap metadata for a range of blocks

2016-11-04T20:34:47Z

Provide function equivalent to unmap_underlying_metadata() for a range of blocks. We somewhat optimize the function to use pagevec lookups instead of looking up buffer heads one by one and use page lock to pin buffer heads instead of mapping's private_lock to improve scalability. Signed-off-by: Jan Kara Signed-off-by: Jens Axboe