user/sven/linux.git/include/linux/can/dev.h, branch v4.14.43

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

can: dev: add CAN interface API for fixed bitrates

2017-01-24T12:52:00Z

Some CAN interfaces only support fixed fixed bitrates. This patch adds a netlink interface to get the list of the CAN interface's fixed bitrates and data bitrates. Inside the driver arrays of supported data- bitrate values are defined. const u32 drvname_bitrate[] = { 20000, 50000, 100000 }; const u32 drvname_data_bitrate[] = { 200000, 500000, 1000000 }; struct drvname_priv *priv; priv = netdev_priv(dev); priv->bitrate_const = drvname_bitrate; priv->bitrate_const_cnt = ARRAY_SIZE(drvname_bitrate); priv->data_bitrate_const = drvname_data_bitrate; priv->data_bitrate_const_cnt = ARRAY_SIZE(drvname_data_bitrate); Signed-off-by: Marc Kleine-Budde

can: dev: add CAN interface termination API

2017-01-24T12:52:00Z

This patch adds a netlink interface to configure the CAN bus termination of CAN interfaces. Inside the driver an array of supported termination values is defined: const u16 drvname_termination[] = { 60, 120, CAN_TERMINATION_DISABLED }; struct drvname_priv *priv; priv = netdev_priv(dev); priv->termination_const = drvname_termination; priv->termination_const_cnt = ARRAY_SIZE(drvname_termination); priv->termination = CAN_TERMINATION_DISABLED; And the funtion to set the value has to be defined: priv->do_set_termination = drvname_set_termination; Signed-off-by: Oliver Hartkopp Reviewed-by: Ramesh Shanmugasundaram Signed-off-by: Marc Kleine-Budde

can: dev: fix deadlock reported after bus-off

2016-09-22T08:01:21Z

A timer was used to restart after the bus-off state, leading to a relatively large can_restart() executed in an interrupt context, which in turn sets up pinctrl. When this happens during system boot, there is a high probability of grabbing the pinctrl_list_mutex, which is locked already by the probe() of other device, making the kernel suspect a deadlock condition [1]. To resolve this issue, the restart_timer is replaced by a delayed work. [1] https://github.com/victronenergy/venus/issues/24 Signed-off-by: Sergei Miroshnichenko Cc: linux-stable Signed-off-by: Marc Kleine-Budde

can: fix handling of unmodifiable configuration options

2016-05-09T09:07:28Z

As described in 'can: m_can: tag current CAN FD controllers as non-ISO' (6cfda7fbebe) it is possible to define fixed configuration options by setting the according bit in 'ctrlmode' and clear it in 'ctrlmode_supported'. This leads to the incovenience that the fixed configuration bits can not be passed by netlink even when they have the correct values (e.g. non-ISO, FD). This patch fixes that issue and not only allows fixed set bit values to be set again but now requires(!) to provide these fixed values at configuration time. A valid CAN FD configuration consists of a nominal/arbitration bittiming, a data bittiming and a control mode with CAN_CTRLMODE_FD set - which is now enforced by a new can_validate() function. This fix additionally removed the inconsistency that was prohibiting the support of 'CANFD-only' controller drivers, like the RCar CAN FD. For this reason a new helper can_set_static_ctrlmode() has been introduced to provide a proper interface to handle static enabled CAN controller options. Reported-by: Ramesh Shanmugasundaram Signed-off-by: Oliver Hartkopp Reviewed-by: Ramesh Shanmugasundaram Cc: # >= 3.18 Signed-off-by: Marc Kleine-Budde

net/can: can_dropped_invalid_skb can be boolean

2015-10-09T14:49:01Z

This patch makes can_dropped_invalid_skb return bool due to this particular function only using either one or zero as its return value. No functional change. Signed-off-by: Yaowei Bai Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller

can: headers: make header files self contained

2015-09-21T06:38:22Z

This patch adds the missing #include-s to the dev.h and led.h, so that they can be used without including further header files. Signed-off-by: Marc Kleine-Budde

can: add combined rx/tx LED trigger support

2015-03-22T22:50:11Z

Add -rxtx trigger, that will be activated both for tx as rx events. This trigger mimics "activity" LED for Ethernet devices. Signed-off-by: Yegor Yefremov Signed-off-by: Marc Kleine-Budde

can: dev: Consolidate and unify state change handling

2014-12-07T20:22:09Z

The handling of can error states is different between platforms. This is an attempt to correct that problem. I've moved this handling into a generic function for changing the error state. This ensures that error state changes are handled the same way everywhere (where this function is used). This new mechanism also adds reverse state transitioning in error frames, i.e. the user will be notified through the socket interface when the state goes down. Signed-off-by: Andri Yngvason Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde

can: dev: add can_is_canfd_skb() API

2014-11-18T12:23:31Z

The CAN device drivers can use can_is_canfd_skb() to check if the frame to send is on CAN FD mode or normal CAN mode. Acked-by: Oliver Hartkopp Signed-off-by: Dong Aisheng Signed-off-by: Marc Kleine-Budde