user/sven/linux.git/include/linux/can, branch v3.2.78

can: remove references to berlios mailinglist

2011-10-17T23:22:46Z

The BerliOS project, which currently hosts our mailinglist, will close with the end of the year. Now take the chance and remove all occurrences of the mailinglist address from the source files. Signed-off-by: Marc Kleine-Budde Signed-off-by: David S. Miller

can-gw: add netlink based CAN routing

2011-09-16T21:37:51Z

This patch adds a CAN Gateway/Router to route (and modify) CAN frames. It is based on the PF_CAN core infrastructure for msg filtering and msg sending and can optionally modify routed CAN frames on the fly. CAN frames can *only* be routed between CAN network interfaces (one hop). They can be modified with AND/OR/XOR/SET operations as configured by the netlink configuration interface known e.g. from iptables. From the netlink view this can-gw implements RTM_{NEW|DEL|GET}ROUTE for PF_CAN. The CAN specific userspace tool to manage CAN routing entries can be found in the CAN utils http://svn.berlios.de/wsvn/socketcan/trunk/can-utils/cangw.c at the SocketCAN SVN on BerliOS. Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller

headers, can: Add missing #include to

2011-08-26T16:02:51Z

uses type canid_t, defined in . Signed-off-by: Ben Hutchings Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller

can: make struct can_proto const

2011-05-04T21:08:36Z

commit 53914b67993c724cec585863755c9ebc8446e83b had the same message. That commit did put everything in place but did not make can_proto const itself. Signed-off-by: Kurt Van Dijck Acked-by: Oliver Hartkopp Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

2011-04-11T14:27:24Z

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (34 commits) net: Add support for SMSC LAN9530, LAN9730 and LAN89530 mlx4_en: Restoring RX buffer pointer in case of failure mlx4: Sensing link type at device initialization ipv4: Fix "Set rt->rt_iif more sanely on output routes." MAINTAINERS: add entry for Xen network backend be2net: Fix suspend/resume operation be2net: Rename some struct members for clarity pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_dev dsa/mv88e6131: add support for mv88e6085 switch ipv6: Enable RFS sk_rxhash tracking for ipv6 sockets (v2) be2net: Fix a potential crash during shutdown. bna: Fix for handling firmware heartbeat failure can: mcp251x: Allow pass IRQ flags through platform data. smsc911x: fix mac_lock acquision before calling smsc911x_mac_read iwlwifi: accept EEPROM version 0x423 for iwl6000 rt2x00: fix cancelling uninitialized work rtlwifi: Fix some warnings/bugs p54usb: IDs for two new devices wl12xx: fix potential buffer overflow in testmode nvs push zd1211rw: reset rx idle timer from tasklet ...

can: mcp251x: Allow pass IRQ flags through platform data.

2011-04-06T19:24:26Z

When an interrupt occurs, the INT pin is driven low by the MCP251x controller (falling edge) but in some cases the INT pin can be connected to the MPU through a transistor or level translator which inverts this signal. In this case interrupt should be configured in rising edge. This patch adds support to pass the IRQ flags via mcp251x_platform_data. Signed-off-by: Enric Balletbo i Serra Acked-by: Wolfgang Grandegger Acked-by: Marc Kleine-Budde Signed-off-by: David S. Miller

Fix common misspellings

2011-03-31T14:26:23Z

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi

can: make struct proto const

2011-03-28T06:34:59Z

can_ioctl is the only reason for struct proto to be non-const. script/check-patch.pl suggests struct proto be const. Setting the reference to the common can_ioctl() in all CAN protocols directly removes the need to make the struct proto writable in af_can.c Signed-off-by: Kurt Van Dijck Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller

can: mcp251x: Don't use pdata->model for chip selection anymore

2010-10-18T13:16:08Z

Since commit e446630c960946b5c1762e4eadb618becef599e7, i.e. v2.6.35-rc1, the mcp251x chip model can be selected via the modalias member in the struct spi_board_info. The driver stores the actual model in the struct mcp251x_platform_data. From the driver point of view the platform_data should be read only. Since all in-tree users of the mcp251x have already been converted to the modalias method, this patch moves the "model" member from the struct mcp251x_platform_data to the driver's private data structure. Signed-off-by: Marc Kleine-Budde Cc: Christian Pellegrin Cc: Marc Zyngier

CAN: Add Flexcan CAN controller driver

2010-07-22T16:06:25Z

This core is found on some Freescale SoCs and also some Coldfire SoCs. Support for Coldfire is missing though at the moment as they have an older revision of the core which does not have RX FIFO support. Signed-off-by: Sascha Hauer Signed-off-by: Marc Kleine-Budde Acked-by: Wolfgang Grandegger Signed-off-by: Marc Kleine-Budde