user/sven/linux.git/include/linux/ceph, branch v5.18.19

libceph: fix potential use-after-free on linger ping and resends

2022-05-18T19:21:05Z

request_reinit() is not only ugly as the comment rightfully suggests, but also unsafe. Even though it is called with osdc->lock held for write in all cases, resetting the OSD request refcount can still race with handle_reply() and result in use-after-free. Taking linger ping as an example: handle_timeout thread handle_reply thread down_read(&osdc->lock) req = lookup_request(...) ... finish_request(req) # unregisters up_read(&osdc->lock) __complete_request(req) linger_ping_cb(req) # req->r_kref == 2 because handle_reply still holds its ref down_write(&osdc->lock) send_linger_ping(lreq) req = lreq->ping_req # same req # cancel_linger_request is NOT # called - handle_reply already # unregistered request_reinit(req) WARN_ON(req->r_kref != 1) # fires request_init(req) kref_init(req->r_kref) # req->r_kref == 1 after kref_init ceph_osdc_put_request(req) kref_put(req->r_kref) # req->r_kref == 0 after kref_put, req is freed !!! This happens because send_linger_ping() always (re)uses the same OSD request for watch ping requests, relying on cancel_linger_request() to unregister it from the OSD client and rip its messages out from the messenger. send_linger() does the same for watch/notify registration and watch reconnect requests. Unfortunately cancel_request() doesn't guarantee that after it returns the OSD client would be completely done with the OSD request -- a ref could still be held and the callback (if specified) could still be invoked too. The original motivation for request_reinit() was inability to deal with allocation failures in send_linger() and send_linger_ping(). Switching to using osdc->req_mempool (currently only used by CephFS) respects that and allows us to get rid of request_reinit(). Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov Reviewed-by: Xiubo Li Acked-by: Jeff Layton

ceph: do not release the global snaprealm until unmounting

2022-03-01T17:26:37Z

The global snaprealm would be created and then destroyed immediately every time when updating it. URL: https://tracker.ceph.com/issues/54362 Signed-off-by: Xiubo Li Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov

ceph: remove incorrect and unused CEPH_INO_DOTDOT macro

2022-03-01T17:26:37Z

Ceph have removed this macro and the 0x3 will be use for global dummy snaprealm. Signed-off-by: Xiubo Li Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov

ceph: move to a dedicated slabcache for ceph_cap_snap

2022-03-01T17:26:37Z

There could be huge number of capsnaps around at any given time. On x86_64 the structure is 248 bytes, which will be rounded up to 256 bytes by kzalloc. Move this to a dedicated slabcache to save 8 bytes for each. [ jlayton: use kmem_cache_zalloc ] Signed-off-by: Xiubo Li Signed-off-by: Jeff Layton Signed-off-by: Ilya Dryomov

ceph: add getvxattr op

2022-03-01T17:26:37Z

Problem: Some directory vxattrs (e.g. ceph.dir.pin.random) are governed by information that isn't necessarily shared with the client. Add support for the new GETVXATTR operation, which allows the client to query the MDS directly for vxattrs. When the client is queried for a vxattr that doesn't have a special handler, have it issue a GETVXATTR to the MDS directly. Solution: Adds new getvxattr op to fetch ceph.dir.pin*, ceph.dir.layout* and ceph.file.layout* vxattrs. If the entire layout for a dir or a file is being set, then it is expected that the layout be set in standard JSON format. Individual field value retrieval is not wrapped in JSON. The JSON format also applies while setting the vxattr if the entire layout is being set in one go. As a temporary measure, setting a vxattr can also be done in the old format. The old format will be deprecated in the future. URL: https://tracker.ceph.com/issues/51062 Signed-off-by: Milind Changire Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov

libceph: optionally use bounce buffer on recv path in crc mode

2022-02-02T17:50:36Z

Both msgr1 and msgr2 in crc mode are zero copy in the sense that message data is read from the socket directly into the destination buffer. We assume that the destination buffer is stable (i.e. remains unchanged while it is being read to) though. Otherwise, CRC errors ensue: libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706 libceph: osd1 (1)192.168.122.1:6843 bad crc/signature libceph: bad data crc, calculated 57958023, expected 1805382778 libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc Introduce rxbounce option to enable use of a bounce buffer when receiving message data. In particular this is needed if a mapped image is a Windows VM disk, passed to QEMU. Windows has a system-wide "dummy" page that may be mapped into the destination buffer (potentially more than once into the same buffer) by the Windows Memory Manager in an effort to generate a single large I/O [1][2]. QEMU makes a point of preserving overlap relationships when cloning I/O vectors, so krbd gets exposed to this behaviour. [1] "What Is Really in That MDL?" https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85) [2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/ URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317 Signed-off-by: Ilya Dryomov Reviewed-by: Jeff Layton

libceph: make recv path in secure mode work the same as send path

2022-02-02T17:50:36Z

The recv path of secure mode is intertwined with that of crc mode. While it's slightly more efficient that way (the ciphertext is read into the destination buffer and decrypted in place, thus avoiding two potentially heavy memory allocations for the bounce buffer and the corresponding sg array), it isn't really amenable to changes. Sacrifice that edge and align with the send path which always uses a full-sized bounce buffer (currently there is no other way -- if the kernel crypto API ever grows support for streaming (piecewise) en/decryption for GCM [1], we would be able to easily take advantage of that on both sides). [1] https://lore.kernel.org/all/20141225202830.GA18794@gondor.apana.org.au/ Signed-off-by: Ilya Dryomov Reviewed-by: Jeff Layton

Merge tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client

2022-01-20T11:46:20Z

Pull ceph updates from Ilya Dryomov: "The highlight is the new mount "device" string syntax implemented by Venky Shankar. It solves some long-standing issues with using different auth entities and/or mounting different CephFS filesystems from the same cluster, remounting and also misleading /proc/mounts contents. The existing syntax of course remains to be maintained. On top of that, there is a couple of fixes for edge cases in quota and a new mount option for turning on unbuffered I/O mode globally instead of on a per-file basis with ioctl(CEPH_IOC_SYNCIO)" * tag 'ceph-for-5.17-rc1' of git://github.com/ceph/ceph-client: ceph: move CEPH_SUPER_MAGIC definition to magic.h ceph: remove redundant Lsx caps check ceph: add new "nopagecache" option ceph: don't check for quotas on MDS stray dirs ceph: drop send metrics debug message rbd: make const pointer spaces a static const array ceph: Fix incorrect statfs report for small quota ceph: mount syntax module parameter doc: document new CephFS mount device syntax ceph: record updated mon_addr on remount ceph: new device mount syntax libceph: rename parse_fsid() to ceph_parse_fsid() and export libceph: generalize addr/ip parsing based on delimiter

mm: allow !GFP_KERNEL allocations for kvmalloc

2022-01-15T14:30:29Z

Support for GFP_NO{FS,IO} and __GFP_NOFAIL has been implemented by previous patches so we can allow the support for kvmalloc. This will allow some external users to simplify or completely remove their helpers. GFP_NOWAIT semantic hasn't been supported so far but it hasn't been explicitly documented so let's add a note about that. ceph_kvmalloc is the first helper to be dropped and changed to kvmalloc. Link: https://lkml.kernel.org/r/20211122153233.9924-5-mhocko@kernel.org Signed-off-by: Michal Hocko Reviewed-by: Uladzislau Rezki (Sony) Acked-by: Vlastimil Babka Cc: Christoph Hellwig Cc: Dave Chinner Cc: Ilya Dryomov Cc: Jeff Layton Cc: Neil Brown Cc: Sebastian Andrzej Siewior Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

libceph: rename parse_fsid() to ceph_parse_fsid() and export

2022-01-13T12:40:06Z

... as it is too generic. also, use __func__ when logging rather than hardcoding the function name. Signed-off-by: Venky Shankar Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov