user/sven/linux.git/include/linux/clk.h, branch v3.10.32

clk: Properly handle notifier return values

2013-04-10T23:33:53Z

Notifiers may return NOTIFY_(OK|DONE|STOP|BAD). The CCF uses an inconsistent mix of checking against NOTIFY_STOP or NOTIFY_BAD. This inconsistency leaves errors undetected in some cases: clk_set_parent() calls __clk_speculate_rates(), which stops when it hits a NOTIFIER_BAD (STOP is ignored), and passes this value back to the caller. clk_set_parent() compares this return value against NOTIFY_STOP only, ignoring NOTIFY_BAD returns. Use NOTIFY_STOP_MASK to detect a negative notifier return value and document all four return value options. Signed-off-by: Soren Brinkmann Signed-off-by: Mike Turquette

clk: add non CONFIG_HAVE_CLK routines

2012-07-31T00:25:11Z

Many drivers are shared between architectures that may or may not have HAVE_CLK selected for them. To remove compilation errors for them we enclose clk_*() calls in these drivers within #ifdef CONFIG_HAVE_CLK, #endif. This patch removes the need of these CONFIG_HAVE_CLK statements, by introducing dummy routines when HAVE_CLK is not selected by platforms. So, definition of these routines will always be available. These calls will return error for platforms that don't select HAVE_CLK. Signed-off-by: Viresh Kumar Cc: Wolfram Sang Cc: Greg Kroah-Hartman Cc: Jeff Garzik Cc: Andrew Lunn Cc: Bhupesh Sharma Cc: Giuseppe Cavallaro Cc: Russell King Cc: Mike Turquette Cc: Sergei Shtylyov Cc: viresh kumar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux

2012-07-24T23:40:57Z

Pull common clk framework changes from Michael Turquette: "This includes a small number of core framework improvments, platform ports and new DT bindings." Fix up trivial conflicts in drivers/clk/Makefile * tag 'clk-for-linus' of git://git.linaro.org/people/mturquette/linux: (21 commits) clk: fix compile for OF && !COMMON_CLK clk: fix clk_get on of_clk_get_by_name return check clk: mxs: clk_register_clkdev mx28 usb clocks clk: add highbank clock support dt: add clock binding doc to primecell bindings clk: add DT fixed-clock binding support clk: add DT clock binding support ARM: integrator: convert to common clock clk: add versatile ICST307 driver ARM: integrator: put symbolic bus names on devices ARM: u300: convert to common clock clk: cache parent clocks only for muxes clk: wm831x: Add initial WM831x clock driver clk: Constify struct clk_init_data clk: Add CLK_IS_BASIC flag to identify basic clocks clk: Add support for rate table based dividers clk: Add support for power of two type dividers clk: mxs: imx28: decrease the frequency of ref_io1 for SSP2 and SSP3 clk: mxs: add clkdev lookup for pwm clk: mxs: Fix the GPMI clock name ...

Fix typo in include/linux/clk.h .

2012-07-24T11:00:02Z

Signed-off-by: Jan-Simon Möller Cc: Russell King Cc: linux-kernel@vger.kernel.org Signed-off-by: Jiri Kosina

clk: fix compile for OF && !COMMON_CLK

2012-07-19T21:07:56Z

With commit 766e6a4ec602d0c107 (clk: add DT clock binding support), compiling with OF && !COMMON_CLK is broken. Reported-by: Alexandre Pereira da Silva Reported-by: Prashant Gaikwad Signed-off-by: Rob Herring Signed-off-by: Mike Turquette

clk: fix clk_get on of_clk_get_by_name return check

2012-07-19T21:07:45Z

The commit 766e6a4 (clk: add DT clock binding support) plugs device tree clk lookup of_clk_get_by_name into clk_get, and fall on non-DT lookup clk_get_sys if DT lookup fails. The return check on of_clk_get_by_name takes (clk != NULL) as a successful DT lookup. But it's not the case. For any system that does not define clk lookup in device tree, ERR_PTR(-ENOENT) will be returned, and consequently, all the client drivers calling clk_get in their probe functions will fail to probe with error code -ENOENT returned. Fix the issue by checking of_clk_get_by_name return with !IS_ERR(clk), and update of_clk_get and of_clk_get_by_name for !CONFIG_OF build correspondingly. Signed-off-by: Shawn Guo Acked-by: Rob Herring Tested-by: Marek Vasut Tested-by: Lauri Hintsala Signed-off-by: Mike Turquette

clk: add DT clock binding support

2012-07-12T00:58:45Z

Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-*', and to only use clock-output* for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely Signed-off-by: Rob Herring Reviewed-by: Shawn Guo Cc: Sascha Hauer Signed-off-by: Mike Turquette

Merge branch 'depends/rmk/clkdev' into next/clock

2012-05-11T15:13:00Z

* depends/rmk/clkdev: CLKDEV: provide helpers for common clock framework ARM: 7392/1: CLKDEV: Optimize clk_find() ARM: 7376/1: clkdev: Implement managed clk_get()

clk: remove trailing whitespace from clk.h

2012-04-24T23:37:41Z

Remove trailing whitespace from 2 lines. Signed-off-by: Rob Herring

clk: Remove comment for end of CONFIG_COMMON_CLK section

2012-04-24T23:37:39Z

The comment is inaccurate (it actually ends the CONFIG_COMMON_CLK section, there's no else) and given that we've just got a single level of ifdef isn't really needed anyway. Signed-off-by: Mark Brown Signed-off-by: Mike Turquette