user/sven/linux.git/include/linux/clk.h, branch v5.18.13

clk: Add clk_drop_range

2022-03-12T03:15:03Z

In order to reset the range on a clock, we need to call clk_set_rate_range with a minimum of 0 and a maximum of ULONG_MAX. Since it's fairly inconvenient, let's introduce a clk_drop_range() function that will do just this. Suggested-by: Stephen Boyd Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20220225143534.405820-8-maxime@cerno.tech Signed-off-by: Stephen Boyd

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2021-02-22T17:45:23Z

Pull clk updates from Stephen Boyd: "This is all driver updates, the majority of which is a bunch of new Qualcomm clk drivers that dominate the diffstat because we add support for six SoCs from that particular vendor. The other big change is the removal of various clk drivers that are no longer used now that the kernel is dropping support for those SoCs. Beyond that there's the usual non-critical fixes for existing drivers and a good number of patches from Lee Jones that cleanup a bunch of W=1 enabled builds. Removed Drivers: - Remove efm32 clk driver - Remove tango4 clk driver - Remove zte zx clk driver - Remove sirf prima2/atlast clk drivers - Remove u300 clk driver New Drivers: - PLL support on MStar/SigmaStar ARMv7 SoCs - CPU clks for Qualcomm SDX55 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs - GCC clks for Qualcomm SM8350 - GPU clks for Qualcomm SDM660/SDM630 Updates: - Video clk fixups on Qualcomm SM8250 - Improvements for multimedia clks on Qualcomm MSM8998 - Fix many warnings with W=1 enabled builds under drivers/clk/ - Support crystal load capacitance for Versaclock VC5 - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid glitches at boot - Convert Xilinx VCU clk driver to a proper clk provider driver - Expose Xilinx ZynqMP clk driver to more platforms - Amlogic pll driver fixup - Amlogic meson8b clock controller dt support clean up - Remove mipi clk from the Amlogic axg clock controller - New Rockchip rk3368 clock ids related to camera input - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk reparenting - A series from Liu Ying that adds some SCU clocks support for i.MX8qxp DC0/MIPI-LVDS subsystems - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ, and clkout1/2 support for i.MX8MM/MN - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA (SYS-DMAC) clocks on Renesas R-Car V3U - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs - Allwinner H616 SoC clk support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits) clk: mstar: msc313-mpll: Fix format specifier clk: mstar: Allow MStar clk drivers to be compile tested clk: qoriq: use macros to generate pll_mask clk: qcom: Add Global Clock controller (GCC) driver for SC7280 dt-bindings: clock: Add SC7280 GCC clock binding clk: qcom: rpmh: Add support for RPMH clocks on SC7280 dt-bindings: clock: Add RPMHCC bindings for SC7280 clk: qcom: gcc-sm8350: add gdsc dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc clk: qcom: gdsc: Implement NO_RET_PERIPH flag clk: mstar: MStar/SigmaStar MPLL driver ...

PM: clk: make PM clock layer compatible with clocks that must sleep

2021-01-27T18:29:32Z

The clock API splits its interface into sleepable ant atomic contexts: - clk_prepare/clk_unprepare for stuff that might sleep - clk_enable_clk_disable for anything that may be done in atomic context The code handling runtime PM for clocks only calls clk_disable() on suspend requests, and clk_enable on resume requests. This means that runtime PM with clock providers that only have the prepare/unprepare methods implemented is basically useless. Many clock implementations can't accommodate atomic contexts. This is often the case when communication with the clock happens through another subsystem like I2C or SCMI. Let's make the clock PM code useful with such clocks by safely invoking clk_prepare/clk_unprepare upon resume/suspend requests. Of course, when such clocks are registered with the PM layer then pm_runtime_irq_safe() can't be used, and neither pm_runtime_suspend() nor pm_runtime_resume() may be invoked in atomic context. For clocks that do implement the enable and disable methods then everything just works as before. A note on sparse: According to https://lwn.net/Articles/109066/ there are things that sparse can't cope with. In particular, pm_clk_op_lock() and pm_clk_op_unlock() may or may not lock/unlock psd->lock depending on some runtime condition. To work around that we tell it the lock is always untaken for the purpose of static analisys. Thanks to Naresh Kamboju for reporting issues with the initial patch. Signed-off-by: Nicolas Pitre Tested-by: Naresh Kamboju Signed-off-by: Rafael J. Wysocki

linux/clk.h: use correct kernel-doc notation for 2 functions

2021-01-12T19:30:50Z

Fix kernel-doc notation for 2 functions so that the generated html is correct. Currently it skips all text between the ':' and the '-', so "[un]register a clock rate" is missing. Fixes: 86bcfa2e87c4 ("clk: add pr_debug & kerneldoc around clk notifiers") Signed-off-by: Randy Dunlap Cc: Mike Turquette Cc: Russell King Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20210107023304.24442-1-rdunlap@infradead.org Signed-off-by: Stephen Boyd

Merge branches 'clk-doc', 'clk-qcom', 'clk-simplify', 'clk-hw', 'clk-renesas' and 'clk-samsung' into clk-next

2020-12-21T01:17:01Z

- Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw * clk-doc: clk: fix a kernel-doc markup * clk-qcom: (27 commits) clk: qcom: rpmh: add support for SM8350 rpmh clocks dt-bindings: clock: Add RPMHCC bindings for SM8350 clk: qcom: lpasscc: Introduce pm autosuspend for SC7180 clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2 clk: qcom: gcc-sc7180: Use floor ops for sdcc clks clk: qcom: Add GDSC support for SDX55 GCC dt-bindings: clock: Add GDSC in SDX55 GCC clk: qcom: Add support for SDX55 RPMh clocks dt-bindings: clock: Introduce RPMHCC bindings for SDX55 clk: qcom: Add SDX55 GCC support dt-bindings: clock: Add SDX55 GCC clock bindings clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic" clk: qcom: rpmh: Add CE clock on sdm845. dt-bindings: clock: Add entry for crypto engine RPMH clock resource clk: qcom: dispcc-sm8250: handle MMCX power domain clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones clk: qcom: lpass-sc7180: Clean up on error in lpass_sc7180_init() clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks dt-bindings: clock: Add support for LPASS Always ON Controller ... * clk-simplify: clk: remove unneeded dead-store initialization * clk-hw: clk: meson: g12: use devm variant to register notifiers clk: add devm variant of clk_notifier_register clk: meson: g12: drop use of __clk_lookup() clk: add api to get clk consumer from clk_hw clk: avoid devm_clk_release name clash * clk-renesas: dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema clk: renesas: sh73a0: Stop using __raw_*() I/O accessors clk: renesas: r8a774c0: Add RPC clocks clk: renesas: r8a779a0: Fix R and OSC clocks clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get() clk: renesas: r8a774b1: Add RPC clocks clk: renesas: r8a774a1: Add RPC clocks clk: renesas: r8a779a0: Add VIN clocks clk: renesas: r8a779a0: Add CSI4[0-3] clocks MAINTAINERS: Update git repo for Renesas clock drivers clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI * clk-samsung: clk: samsung: Prevent potential endless loop in the PLL ops clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210

clk: meson: g12: use devm variant to register notifiers

2020-11-14T20:58:31Z

Until now, nothing was done to unregister the dvfs clock notifiers of the Amlogic g12 SoC family. This is not great but this driver was not really expected to be unloaded. With the ongoing effort to build everything as module for this platform, this needs to be cleanly handled. Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20201021163847.595189-3-jbrunet@baylibre.com Signed-off-by: Stephen Boyd

clk: add devm variant of clk_notifier_register

2020-11-14T20:58:30Z

Add a memory managed variant of clk_notifier_register() to make life easier on clock consumers using notifiers Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20201021163847.595189-2-jbrunet@baylibre.com Signed-off-by: Stephen Boyd

clk: fix a kernel-doc markup

2020-11-05T02:00:58Z

clk_get_duty_cycle -> clk_get_scaled_duty_cycle Signed-off-by: Mauro Carvalho Chehab Link: https://lore.kernel.org/r/b2336f3f3cdfe6e1a2d3a7a056ab7ccc7a81b945.1603469755.git.mchehab+huawei@kernel.org Signed-off-by: Stephen Boyd

clk: clarify that clk_set_rate() does updates from top to bottom

2020-01-07T10:31:47Z

clk_set_rate() currently starts updating the rate for a clock at the top-most affected clock and then walks down the tree to update the bottom-most affected clock last. This behavior is important for protected clocks where we can switch between multiple parents to achieve the same output. An example for this is the mali clock tree on Amlogic SoCs: mali_0_mux (must not change when enabled) mali_0_div (must not change when enabled) mali_0 (gate) mali_1_mux (must not change when enabled) mali_1_div (must not change when enabled) mali_1 (gate) The final output can either use mali_0_gate or mali_1. To change the final output we must switch to the "inactive" tree. Assuming mali_0 is active, then we need to prepare mali_1 with the new desired rate and finally switch the output to the mali_1 tree. This process will then protect the mali_1 tree and at the same time unprotect the mali_0 tree. The next call to clk_set_rate() will then switch from the mali_1 tree back to mali_0. Acked-by: Stephen Boyd Signed-off-by: Martin Blumenstingl Signed-off-by: Jerome Brunet

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2019-09-20T22:45:07Z

Pull clk updates from Stephen Boyd: "We have a small collection of core framework updates this time, mostly around clk registration by clk providers and debugfs "nice to haves" for rate constraints. I'll highlight that we're now setting the clk_init_data pointer inside struct clk_hw to NULL during clk_register(), which may break some drivers that thought they could use that pointer during normal operations. That change has been sitting in next for a while now but maybe something is still broken. We'l see. Other than that the core framework changes aren't invasive and they're fixing bugs, simplifying, and making things better. On the clk driver side we got the usual addition of new SoC support, new features for existing drivers, and bug fixes scattered throughout. The biggest diffstat is the Amlogic driver that gained CPU clk support in addition to migrating to the new way of specifying clk parents. After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and clock controllers from those vendors. Core: - Drop NULL checks in clk debugfs - Add min/max rates to clk debugfs - Set clk_init_data pointer inside clk_hw to NULL after registration - Make clk_bulk_get_all() return an 'id' corresponding to clock-names - Evict parents from parent cache when they're unregistered New Drivers: - Add clock driver for i.MX8MN SoCs - Support aspeed AST2600 SoCs - Support for Mediatek MT6779 SoCs - Support qcom SM8150 GCC and RPMh clks - Support qcom QCS404 WCSS clks - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807) - Addition of clock driver for Rockchip rk3308 SoCs Updates: - Add regulator support to the cdce925 clk driver - Add support for Raspberry Pi 4 bcm2711 SoCs - Add SDIO gate support to aspeed driver - Add missing of_node_put() calls in various clk drivers - Migrate Amlogic driver to new clock parent description method - Add DVFS support to Amlogic Meson g12 - Add Amlogic Meson g12a reset support to the axg audio clock controller - Add sm1 support to the Amlogic Meson g12a clock controller - Switch i.MX8MM clock driver to platform driver - Add Hifi4 DSP related clocks for i.MX8QXP SoC - Fix Audio PLL setting and parent clock for USB - Misc i.MX8 clock driver improvements and corrections - Set floor ops for Qualcomm SD clks so that rounding works - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1 - Enable the Allwinner V3 SoC and fix the i2s clock for H6" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits) clk: Drop !clk checks in debugfs dumping clk: imx: imx8mn: fix pll mux bit clk: imx: imx8mm: fix pll mux bit clk: imx: clk-pll14xx: unbypass PLL by default clk: imx: pll14xx: avoid glitch when set rate clk: mvebu: ap80x: add AP807 clock support clk: mvebu: ap806: Prepare the introduction of AP807 clock support clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver clk: mvebu: ap806: be more explicit on what SaR is clk: mvebu: ap80x-cpu: add AP807 CPU clock support clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock dt-bindings: ap806: Document AP807 clock compatible dt-bindings: ap80x: Document AP807 CPU clock compatible clk: sprd: add missing kfree clk: at91: allow 24 Mhz clock as input for PLL clk: Make clk_bulk_get_all() return a valid "id" clk: actions: Fix factor clk struct member access clk: qcom: rcg: Return failure for RCG update clk: remove extra ---help--- tags in Kconfig clk: add include guard to clk-conf.h ...