user/sven/linux.git/include/linux/clk/tegra.h, branch v5.10.221

clk: tegra: Implement Tegra210 EMC clock

2020-05-12T20:48:42Z

The EMC clock needs to carefully coordinate with the EMC controller programming to make sure external memory can be properly clocked. Do so by hooking up the EMC clock with an EMC provider that will specify which rates are supported by the EMC and provide a callback to use for setting the clock rate at the EMC. Based on work by Peter De Schrijver . Signed-off-by: Joseph Lo Signed-off-by: Thierry Reding

clk: tegra: Export functions for EMC clock scaling

2020-05-12T20:48:41Z

Export functions to allow accessing the CAR register required by EMC clock scaling. These functions will be used to access the CAR register as part of the scaling sequence. Signed-off-by: Joseph Lo Signed-off-by: Thierry Reding

clk: tegra: Add missing stubs for the case of !CONFIG_PM_SLEEP

2019-11-11T13:53:05Z

The new CPUIDLE driver uses the Tegra's CLK API and that driver won't strictly depend on CONFIG_PM_SLEEP, hence add the required stubs in order to allow compiling of the new driver with the CONFIG_PM_SLEEP=n. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra: Add Tegra20/30 EMC clock implementation

2019-11-11T13:01:22Z

A proper External Memory Controller clock rounding and parent selection functionality is required by the EMC drivers, it is not available using the generic clock implementation because only the Memory Controller driver is aware of what clock rates are actually available for a particular device. EMC drivers will have to register a Tegra-specific CLK-API callback which will perform rounding of a requested rate. EMC clock users won't be able to request EMC clock by getting -EPROBE_DEFER until EMC driver is probed and the callback is set up. The functionality is somewhat similar to the clk-emc.c which serves Tegra124+ SoCs. The later HW generations support more parent clock sources and the HW configuration / integration with the EMC drivers differs a tad from the older gens, hence it's not really worth to try to squash everything into a single source file. Acked-by: Peter De Schrijver Signed-off-by: Dmitry Osipenko Acked-by: Stephen Boyd Signed-off-by: Thierry Reding

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

2019-05-30T18:29:52Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Steve Winslow Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman

clk: tegra: MBIST work around for Tegra210

2018-03-08T18:18:08Z

Tegra210 has a hw bug which can cause IP blocks to lock up when ungating a domain. The reason is that the logic responsible for resetting the memory built-in self test mode can come up in an undefined state because its clock is gated by a second level clock gate (SLCG). Work around this by making sure the logic will get some clock edges by ensuring the relevant clock is enabled and temporarily override the relevant SLCGs. Unfortunately for some IP blocks, the control bits for overriding the SLCGs are not in CAR, but in the IP block itself. This means we need to map a few extra register banks in the clock code. Signed-off-by: Peter De Schrijver Reviewed-by: Jon Hunter Tested-by: Jon Hunter Tested-by: Hector Martin Tested-by: Andre Heider Tested-by: Mikko Perttunen Signed-off-by: Thierry Reding fixup mbist

clk: tegra: Add SATA seq input control

2017-03-20T13:26:03Z

This will be used by the powergating driver to ensure proper sequencer state when the SATA domain is powergated. Signed-off-by: Peter De Schrijver Signed-off-by: Thierry Reding

clk: tegra: Handle UTMIPLL IDDQ

2017-03-20T13:09:05Z

Export UTMIPLL IDDQ functions. These will be needed when powergating the XUSB partition. Signed-off-by: BH Hsieh Signed-off-by: Peter De Schrijver Signed-off-by: Thierry Reding

clk: tegra: Add interface to enable hardware control of SATA/XUSB PLLs

2016-04-28T10:41:44Z

On Tegra210, hardware control of the SATA and XUSB pad PLLs must be done during the UPHY enable sequence rather than the PLLE enable sequence. Export functions to do this so that hardware control can be enabled from the XUSB padctl driver. Signed-off-by: Andrew Bresticker Signed-off-by: Rhyland Klein Signed-off-by: Thierry Reding

clk: tegra: Properly include clk.h

2015-07-20T18:11:17Z

Clock provider drivers generally shouldn't include clk.h because it's the consumer API. Only include clk.h in files that are using it. Also add in a clkdev.h include that was missing in a file using clkdev APIs. Cc: Peter De Schrijver Cc: Thierry Reding Signed-off-by: Stephen Boyd