user/sven/linux.git/include/linux/clk, branch v3.15.6

Merge tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2014-04-05T22:46:37Z

Pull ARM SoC late cleanups from Arnd Bergmann: "These could not be part of the first cleanup branch, because they either came too late in the cycle, or they have dependencies on other branches. Important changes are: - The integrator platform is almost multiplatform capable after some reorganization (Linus Walleij) - Minor cleanups on Zynq (Michal Simek) - Lots of changes for Exynos and other Samsung platforms, including further preparations for multiplatform support and the clocks bindings are rearranged" * tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) devicetree: fix newly added exynos sata bindings ARM: EXYNOS: Fix compilation error in cpuidle.c ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h ARM: EXYNOS: Remove hardware.h file ARM: SAMSUNG: Remove hardware.h inclusion ARM: S3C24XX: Remove invalid code from hardware.h dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock ARM: dts: Keep some essential LDOs enabled for arndale-octa board ARM: dts: Disable MDMA1 node for arndale-octa board ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion serial: s3c: Fix build of header without serial_core.h preinclusion ARM: EXYNOS: Allow wake-up using GIC interrupts ARM: EXYNOS: Stop using legacy Samsung PM code ARM: EXYNOS: Remove PM initcalls and useless indirection ARM: EXYNOS: Fix abuse of CONFIG_PM ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h ARM: SAMSUNG: Move common save/restore helpers to separate file ARM: SAMSUNG: Move Samsung PM debug code into separate file ARM: SAMSUNG: Consolidate PM debug functions ARM: SAMSUNG: Use debug_ll_addr() to get UART base address ...

ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT

2014-02-19T19:07:55Z

If CLK_SET_RATE_PARENT is set for a clkoutx2 clock, calling clk_set_rate() on the clock "skips" the x2 multiplier as there are no set_rate and round_rate functions defined for the clkoutx2. This results in getting double the requested clock rates, breaking the display on omap3430 based devices. This got broken when d0f58bd3bba3877fb1af4664c4e33273d36f00e4 and related patches were merged for v3.14, as omapdss driver now relies more on the clk-framework and CLK_SET_RATE_PARENT. This patch implements set_rate and round_rate for clkoutx2. Tested on OMAP3430, OMAP3630, OMAP4460. Signed-off-by: Tomi Valkeinen Acked-by: Tero Kristo Signed-off-by: Paul Walmsley

ARM: zynq: Map I/O memory on clkc init

2014-02-10T10:21:13Z

The clkc has its registers in the range of the slcr. Instead of passing around the slcr base address pointer, let the clkc get the address from the DT. This prepares the slcr to be a real driver with multiple memory ranges (slcr, clocks, pinctrl,...) Signed-off-by: Steffen Trumtrar Signed-off-by: Michal Simek

Merge tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux

2014-01-29T02:44:53Z

Pull more clock framework changes from Mike Turquette: "The second half of the clock framework pull requeust for 3.14 is dominated by platform support for Qualcomm's MSM SoCs, DT binding updates for TI's OMAP-ish processors and additional support for Samsung chips. Additionally there are other smaller clock driver changes and several last minute fixes. This pull request also includes the HiSilicon support that depends on the already-merged arm-soc pull request" [ Fix up stupid compile error in the source tree with evil merge - Grumpy Linus ] * tag 'clk-for-linus-3.14-part2' of git://git.linaro.org/people/mike.turquette/linux: (49 commits) clk: sort Makefile clk: sunxi: fix overflow when setting up divided factors clk: Export more clk-provider functions dt-bindings: qcom: Fix warning with duplicate dt define clk: si5351: remove variant from platform_data clk: samsung: Remove unneeded semicolon clk: qcom: Fix modular build ARM: OMAP3: use DT clock init if DT data is available ARM: AM33xx: remove old clock data and link in new clock init code ARM: AM43xx: Enable clock init ARM: OMAP: DRA7: Enable clock init ARM: OMAP4: remove old clock data and link in new clock init code ARM: OMAP2+: io: use new clock init API ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT ARM: OMAP3: hwmod: initialize clkdm from clkdm_name ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm ARM: OMAP2+: clock: use driver API instead of direct memory read/write ARM: OMAP2+: clock: add support for indexed memmaps ARM: dts: am43xx clock data ARM: dts: AM35xx: use DT clock data ...

CLK: TI: add am43xx clock init file

2014-01-17T20:35:52Z

clk-43xx.c now contains the clock init functionality for am43xx, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo Tested-by: Nishanth Menon Acked-by: Tony Lindgren Signed-off-by: Mike Turquette

CLK: TI: add omap3 clock init file

2014-01-17T20:35:48Z

clk-3xxx.c now contains the clock init functionality for omap3, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo Tested-by: Nishanth Menon Acked-by: Tony Lindgren Signed-off-by: Mike Turquette

CLK: TI: add interface clock support for OMAP3

2014-01-17T20:35:45Z

OMAP3 has interface clocks in addition to functional clocks, which require special handling for the autoidle and idle status register offsets mainly. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette

CLK: TI: add am33xx clock init file

2014-01-17T20:35:41Z

clk-33xx.c now contains the clock init functionality for am33xx, including DT clock registration and adding of static clkdev entries. This patch also moves the omap2_clk_enable_init_clocks declaration to the driver include, as this is needed by the am33xx clock init code. Signed-off-by: Tero Kristo Tested-by: Nishanth Menon Acked-by: Tony Lindgren Signed-off-by: Mike Turquette

CLK: TI: add dra7 clock init file

2014-01-17T20:35:37Z

clk-7xx.c now contains the clock init functionality for dra7, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo Tested-by: Nishanth Menon Acked-by: Tony Lindgren Signed-off-by: Mike Turquette

CLK: TI: add omap5 clock init file

2014-01-17T20:35:24Z

clk-54xx.c now contains the clock init functionality for omap5, including DT clock registration and adding of static clkdev entries. Signed-off-by: Tero Kristo Tested-by: Nishanth Menon Acked-by: Tony Lindgren Signed-off-by: Mike Turquette