user/sven/linux.git/include/linux/clk, branch v4.1.15

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-04-22T16:24:55Z

Pull ARM SoC late changes from Olof Johansson: "We were expecting to sit on this branch through most of the merge window since the contents was merged into our tree late, but we ended up sitting on all of our contents so it can go in with the rest. The contents here is: - a large branch of cleanups of the CM/PRM blocks on OMAP. - a couple of patches plumbing up CM/PRM on OMAP5 and DRA7. - a branch with DT updates for Freescale i.MX. including some shuffling from .dts to .dtsi (include) files that causes a little churn" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (78 commits) ARM: OMAP2+: Fix booting with configs that don't have MFD_SYSCON ARM: OMAP4+: control: add support for initializing control module via DT ARM: dts: dra7: add minimal l4 bus layout with control module support ARM: dts: omap5: add minimal l4 bus layout with control module support ARM: OMAP4+: control: remove support for legacy pad read/write ARM: OMAP4: display: convert display to use syscon for dsi muxing ARM: dts: omap4: add minimal l4 bus layout with control module support ARM: dts: am4372: add minimal l4 bus layout with control module support ARM: dts: am43xx-epos-evm: fix pinmux node layout ARM: dts: am33xx: add minimal l4 bus layout with control module support ARM: dts: omap3: add minimal l4 bus layout with control module support ARM: dts: omap24xx: add minimal l4 bus layout with control module support ARM: OMAP2+: control: add syscon support for register accesses ARM: OMAP2+: id: cache omap_type value ARM: OMAP2+: control: remove API for getting control module base address ARM: OMAP2+: clock: add low-level support for regmap ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags ARM: OMAP2+: CM: move SoC specific init calls within a generic API ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility ...

Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-04-22T16:20:15Z

Pull ARM SoC multiplatform code changes from Olof Johansson: "The changes here belong to two main platforms: - Atmel At91 is flipping the bit and going multiplatform. This includes some cleanups and removal of code, and the final flip of config dependencies - Shmobile has several platforms that are going multiplatform, but this branch also contains a bunch of cleanups that they weren't able to keep separate in a good way. THere's also a removal of one of their SoCs and the corresponding boards (sh7372 and mackerel)" * tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits) ARM: at91/pm: move AT91_MEMCTRL_* to pm.h ARM: at91/pm: move the standby functions to pm.c ARM: at91: fix pm_suspend.S compilation when ARMv6 is selected ARM: at91: add a Kconfig dependency on multi-platform ARM: at91: drop AT91_TIMER_HZ ARM: at91: remove hardware.h ARM: at91: remove SoC headers ARM: at91: remove useless mach/cpu.h ARM: at91: remove unused headers ARM: at91: switch at91_dt_defconfig to multiplatform ARM: at91: switch to multiplatform ARM: shmobile: r8a7778: enable multiplatform target ARM: shmobile: bockw: add sound to DT ARM: shmobile: r8a7778: add sound to DT ARM: shmobile: bockw: add devices hooked up to i2c0 to DT DT: i2c: add trivial binding for OKI ML86V7667 video decoder ARM: shmobile: r8a7778: common clock framework CPG driver ARM: shmobile: bockw dts: set extal clock frequency ARM: shmobile: bockw dts: Move Ethernet node to BSC ARM: shmobile: r8a73a4: Remove legacy code ...

clk: at91: change to using endian agnositc IO

2015-04-11T21:38:39Z

Change to using endian agnostic _relaxed IO accessors instead of __raw Signed-off-by: Ben Dooks -- CC: Andrew Victor CC: Nicolas Ferre CC: Jean-Christophe Plagniol-Villard CC: Mike Turquette (maintainer:COMMON CLK FRAMEWORK) CC: Stephen Boyd (maintainer:COMMON CLK FRAMEWORK) CC: linux-kernel@vger.kernel.org (open list:COMMON CLK FRAMEWORK) Signed-off-by: Michael Turquette

ARM: OMAP2+: PRCM: split PRCM module init to their own driver files

2015-03-27T08:55:56Z

Splits the clock related provider module inits under their own driver files. Previously this was done for all modules under the common PRM driver. Signed-off-by: Tero Kristo

ARM: OMAP2+: PRCM: add support for static clock memmap indices

2015-03-25T09:03:52Z

All clock provider related drivers will now register their iomaps with a static index. This makes it easier to split up the individual drivers to their own files in subsequent patches. Signed-off-by: Tero Kristo

ARM: shmobile: r8a7778: common clock framework CPG driver

2015-02-27T00:49:25Z

Driver for the r8a7778's clocks that depend on the mode bits. Signed-off-by: Ulrich Hecht Acked-by: Laurent Pinchart Acked-by: Michael Turquette Signed-off-by: Simon Horman

clk: omap: compile legacy omap3 clocks conditionally

2015-02-03T19:06:11Z

The 'ARM: OMAP3: legacy clock data move under clk driver' patch series causes build errors when CONFIG_OMAP3 is not set: drivers/clk/ti/dpll.c: In function 'ti_clk_register_dpll': drivers/clk/ti/dpll.c:199:31: error: 'omap3_dpll_ck_ops' undeclared (first use in this function) const struct clk_ops *ops = &omap3_dpll_ck_ops; ^ drivers/clk/ti/dpll.c:199:31: note: each undeclared identifier is reported only once for each function it appears in drivers/clk/ti/dpll.c:259:10: error: 'omap3_dpll_per_ck_ops' undeclared (first use in this function) ops = &omap3_dpll_per_ck_ops; ^ drivers/built-in.o: In function `ti_clk_register_gate': drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_omap3430es2_dss_usbhost_wait' drivers/clk/ti/gate.c:179: undefined reference to `clkhwops_am35xx_ipss_module_wait' -in.o: In function `ti_clk_register_interface': drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_hsotgusb_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_dss_usbhost_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_omap3430es2_iclk_ssi_wait' drivers/clk/ti/interface.c:100: undefined reference to `clkhwops_am35xx_ipss_wait' drivers/built-in.o: In function `ti_clk_register_composite': :(.text+0x3da768): undefined reference to `ti_clk_build_component_gate' In order to fix that problem, this patch makes the omap3 legacy code compiled only when both CONFIG_OMAP3 and CONFIG_ATAGS are set. Signed-off-by: Arnd Bergmann Acked-by: Tony Lindgren Signed-off-by: Michael Turquette

Merge tag 'tegra-clk-3.20' of git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-next

2015-02-02T23:01:10Z

Tegra clock fixes for 3.20

clk: Add rate constraints to clocks

2015-02-02T22:23:42Z

Adds a way for clock consumers to set maximum and minimum rates. This can be used for thermal drivers to set minimum rates, or by misc. drivers to set maximum rates to assure a minimum performance level. Changes the signature of the determine_rate callback by adding the parameters min_rate and max_rate. Signed-off-by: Tomeu Vizoso Signed-off-by: Stephen Boyd [sboyd@codeaurora.org: set req_rate in __clk_init] Signed-off-by: Michael Turquette [mturquette@linaro.org: min/max rate for sun6i_ahb1_clk_determine_rate migrated clk-private.h changes to clk.c]

Merge branch 'clk-omap-legacy' into clk-next

2015-02-02T22:23:33Z

Conflicts: arch/arm/mach-omap2/cclock3xxx_data.c