user/sven/linux.git/include/linux/clk, branch v5.15.87

clk: at91: add register definition for sama7g5's master clock

2021-07-19T12:28:56Z

Add register definitions for SAMA7G5's master clock. These would be also used by architecture specific power saving code. Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210719080317.1045832-3-claudiu.beznea@microchip.com

Merge branches 'clk-legacy', 'clk-vc5', 'clk-allwinner', 'clk-nvidia' and 'clk-imx' into clk-next

2021-06-29T20:33:10Z

* clk-legacy: clkdev: remove unused clkdev_alloc() interfaces clkdev: remove CONFIG_CLKDEV_LOOKUP m68k: coldfire: remove private clk_get/clk_put m68k: coldfire: use clkdev_lookup on most coldfire mips: ralink: convert to CONFIG_COMMON_CLK mips: ar7: convert to CONFIG_COMMON_CLK mips: ar7: convert to clkdev_lookup * clk-vc5: clk: vc5: fix output disabling when enabling a FOD * clk-allwinner: clk: sunxi-ng: v3s: fix incorrect postdivider on pll-audio * clk-nvidia: clk: tegra: clk-tegra124-dfll-fcpu: don't use devm functions for regulator clk: tegra: tegra124-emc: Fix clock imbalance in emc_set_timing() clk: tegra: Add stubs needed for compile-testing clk: tegra: Don't deassert reset on enabling clocks clk: tegra: Mark external clocks as not having reset control clk: tegra: cclk: Handle thermal DIV2 CPU frequency throttling clk: tegra: Don't allow zero clock rate for PLLs clk: tegra: Halve SCLK rate on Tegra20 clk: tegra: Ensure that PLLU configuration is applied properly clk: tegra: Fix refcounting of gate clocks clk: tegra30: Use 300MHz for video decoder by default * clk-imx: clk: imx8mq: remove SYS PLL 1/2 clock gates clk: imx: scu: Do not enable runtime PM for CPU clks clk: imx: scu: add parent save and restore clk: imx: scu: Only save DC SS clock using non-cached clock rate clk: imx: scu: Add A72 frequency scaling support clk: imx: scu: Add A53 frequency scaling support clk: imx: scu: bypass pi_pll enable status restore clk: imx: scu: detach pd if can't power up clk: imx: scu: bypass cpu clock save and restore clk: imx: scu: add parallel port clock ops clk: imx: scu: add more scu clocks clk: imx: scu: add enet rgmii gpr clocks clk: imx8qm: add clock valid resource checking clk: imx8qxp: add clock valid checking mechnism clk: imx: scu: add gpr clocks support clk: imx: scu: remove legacy scu clock binding support dt-bindings: arm: imx: scu: drop deprecated legacy clock binding dt-bindings: arm: imx: scu: fix naming typo of clk compatible string clk: imx: Remove the audio ipg clock from imx8mp

clk: ti: add am33xx/am43xx spread spectrum clock support

2021-06-09T00:49:16Z

The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs. As reported by the TI spruh73x/spruhl7x RM, SSC is only supported for the DISP/LCD and MPU PLLs on am33xx/am43xx. SSC is not supported for DDR, PER, and CORE PLLs. Calculating the required values and setting the registers accordingly was taken from the set_mpu_spreadspectrum routine contained in the arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project. In locked condition, DPLL output clock = CLKINP *[M/N]. In case of SSC enabled, the reference manual explains that there is a restriction of range of M values. Since the omap2_dpll_round_rate routine attempts to select the minimum possible N, the value of M obtained is not guaranteed to be within the range required. With the new "ti,min-div" parameter it is possible to increase N and consequently M to satisfy the constraint imposed by SSC. Signed-off-by: Dario Binacchi Reviewed-by: Tero Kristo Link: https://lore.kernel.org/r/20210606202253.31649-6-dariobin@libero.it Signed-off-by: Stephen Boyd

clk: tegra: Add stubs needed for compile-testing

2021-06-01T11:37:40Z

Add stubs needed for compile-testing of Tegra memory drivers. Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding

clk: tegra: Add PLLE HW power sequencer control

2021-03-24T13:01:58Z

PLLE has a hardware power sequencer logic which is a state machine that can power on/off PLLE without any software intervention. The sequencer has two inputs, one from XUSB UPHY PLL and the other from SATA UPHY PLL. PLLE provides reference clock to XUSB and SATA UPHY PLLs. When both of the downstream PLLs are powered-off, PLLE hardware power sequencer will automatically power off PLLE for power saving. XUSB and SATA UPHY PLLs also have their own hardware power sequencer logic. XUSB UPHY PLL is shared between XUSB SuperSpeed ports and PCIE controllers. The XUSB UPHY PLL hardware power sequencer has inputs from XUSB and PCIE. When all of the XUSB SuperSpeed ports and PCIE controllers are in low power state, XUSB UPHY PLL hardware power sequencer automatically power off PLL and flags idle to PLLE hardware power sequencer. Similar applies to SATA UPHY PLL. PLLE hardware power sequencer has to be enabled after both downstream sequencers are enabled. This commit adds two helper functions: 1. tegra210_plle_hw_sequence_start() for XUSB PADCTL driver to enable PLLE hardware sequencer at proper time. 2. tegra210_plle_hw_sequence_is_enabled() for XUSB PADCTL driver to check whether PLLE hardware sequencer has been enabled or not. Signed-off-by: JC Kuo Acked-by: Thierry Reding Acked-by: Stephen Boyd Signed-off-by: Thierry Reding

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2021-02-22T17:45:23Z

Pull clk updates from Stephen Boyd: "This is all driver updates, the majority of which is a bunch of new Qualcomm clk drivers that dominate the diffstat because we add support for six SoCs from that particular vendor. The other big change is the removal of various clk drivers that are no longer used now that the kernel is dropping support for those SoCs. Beyond that there's the usual non-critical fixes for existing drivers and a good number of patches from Lee Jones that cleanup a bunch of W=1 enabled builds. Removed Drivers: - Remove efm32 clk driver - Remove tango4 clk driver - Remove zte zx clk driver - Remove sirf prima2/atlast clk drivers - Remove u300 clk driver New Drivers: - PLL support on MStar/SigmaStar ARMv7 SoCs - CPU clks for Qualcomm SDX55 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs - GCC clks for Qualcomm SM8350 - GPU clks for Qualcomm SDM660/SDM630 Updates: - Video clk fixups on Qualcomm SM8250 - Improvements for multimedia clks on Qualcomm MSM8998 - Fix many warnings with W=1 enabled builds under drivers/clk/ - Support crystal load capacitance for Versaclock VC5 - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid glitches at boot - Convert Xilinx VCU clk driver to a proper clk provider driver - Expose Xilinx ZynqMP clk driver to more platforms - Amlogic pll driver fixup - Amlogic meson8b clock controller dt support clean up - Remove mipi clk from the Amlogic axg clock controller - New Rockchip rk3368 clock ids related to camera input - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk reparenting - A series from Liu Ying that adds some SCU clocks support for i.MX8qxp DC0/MIPI-LVDS subsystems - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ, and clkout1/2 support for i.MX8MM/MN - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA (SYS-DMAC) clocks on Renesas R-Car V3U - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs - Allwinner H616 SoC clk support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits) clk: mstar: msc313-mpll: Fix format specifier clk: mstar: Allow MStar clk drivers to be compile tested clk: qoriq: use macros to generate pll_mask clk: qcom: Add Global Clock controller (GCC) driver for SC7280 dt-bindings: clock: Add SC7280 GCC clock binding clk: qcom: rpmh: Add support for RPMH clocks on SC7280 dt-bindings: clock: Add RPMHCC bindings for SC7280 clk: qcom: gcc-sm8350: add gdsc dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc clk: qcom: gdsc: Implement NO_RET_PERIPH flag clk: mstar: MStar/SigmaStar MPLL driver ...

Merge branches 'clk-socfpga', 'clk-mstar', 'clk-qcom' and 'clk-warnings' into clk-next

2021-02-16T22:09:24Z

- PLL support on MStar/SigmaStar ARMv7 SoCs - CPU clks for Qualcomm SDX55 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs - GCC clks for Qualcomm SM8350 - Video clk fixups on Qualcomm SM8250 - GPU clks for Qualcomm SDM660/SDM630 - Improvements for multimedia clks on Qualcomm MSM8998 - Fix many warnings with W=1 enabled builds under drivers/clk/ * clk-socfpga: clk: socfpga: agilex: add clock driver for eASIC N5X platform dt-bindings: documentation: add clock bindings information for eASIC N5X * clk-mstar: clk: mstar: msc313-mpll: Fix format specifier clk: mstar: Allow MStar clk drivers to be compile tested clk: mstar: MStar/SigmaStar MPLL driver clk: fixed: add devm helper for clk_hw_register_fixed_factor() dt-bindings: clk: mstar msc313 mpll binding description dt-bindings: clk: mstar msc313 mpll binding header * clk-qcom: (42 commits) clk: qcom: Add Global Clock controller (GCC) driver for SC7280 dt-bindings: clock: Add SC7280 GCC clock binding clk: qcom: rpmh: Add support for RPMH clocks on SC7280 dt-bindings: clock: Add RPMHCC bindings for SC7280 clk: qcom: gcc-sm8350: add gdsc dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc clk: qcom: gdsc: Implement NO_RET_PERIPH flag clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs clk: qcom: gcc-msm8998: Mark gpu_cfg_ahb_clk as critical ... * clk-warnings: (27 commits) clk: zynq: clkc: Remove various instances of an unused variable 'clk' clk: versatile: clk-icst: Fix worthy struct documentation block clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore' clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one clk: st: clkgen-pll: Demote unpopulated kernel-doc header clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc' clk: socfpga: clk-pll: Remove unused variable 'rc' clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used clk: bcm: clk-iproc-pll: Demote kernel-doc abuse clk: zynqmp: divider: Add missing description for 'max_div' clk: spear: Move prototype to accessible header clk: qcom: clk-rpm: Remove a bunch of superfluous code clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags' clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}' clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx' clk: clk-fixed-mmio: Demote obvious kernel-doc abuse clk: qcom: gcc-ipq4019: Remove unused variable 'ret' ...

clk: spear: Move prototype to accessible header

2021-02-11T19:56:06Z

Fixes the following W=1 kernel build warning(s): drivers/clk/spear/spear1310_clock.c:385:13: warning: no previous prototype for ‘spear1310_clk_init’ [-Wmissing-prototypes] drivers/clk/spear/spear1340_clock.c:442:13: warning: no previous prototype for ‘spear1340_clk_init’ [-Wmissing-prototypes] Cc: Viresh Kumar Cc: Shiraz Hashim Cc: Russell King Cc: Rajeev Kumar Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210126124540.3320214-20-lee.jones@linaro.org Acked-by: Viresh Kumar Signed-off-by: Stephen Boyd

clk: imx: Move 'imx6sl_set_wait_clk()'s prototype out to accessible header

2021-01-30T14:13:23Z

Fixes the following W=1 kernel build warning(s): drivers/clk/imx/clk-imx6sl.c:156:6: warning: no previous prototype for ‘imx6sl_set_wait_clk’ [-Wmissing-prototypes] Cc: Russell King Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Ahmad Fatoum Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones Signed-off-by: Shawn Guo

memory: tegra124-emc: Make driver modular

2021-01-05T17:00:09Z

Add modularization support to the Tegra124 EMC driver, which now can be compiled as a loadable kernel module. Note that EMC clock must be registered at clk-init time, otherwise PLLM will be disabled as unused clock at boot time if EMC driver is compiled as a module. Hence add a prepare/complete callbacks. similarly to what is done for the Tegra20/30 EMC drivers. Tested-by: Nicolas Chauvet Signed-off-by: Dmitry Osipenko Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com Signed-off-by: Krzysztof Kozlowski