user/sven/linux.git/include/linux/clockchips.h, branch v3.5-rc2

clockevents: Make clockevents_config() a global symbol

2012-05-24T23:44:51Z

Make clockevents_config() into a global symbol to allow it to be used by compiled-in clockevent drivers. This is needed by drivers that want to update the timer frequency after registration time. Signed-off-by: Magnus Damm Tested-by: Simon Horman Cc: arnd@arndb.de Cc: johnstul@us.ibm.com Cc: rjw@sisk.pl Cc: lethal@linux-sh.org Cc: gregkh@linuxfoundation.org Cc: olof@lixom.net Cc: Magnus Damm Link: http://lkml.kernel.org/r/20120509143934.27521.46553.sendpatchset@w520 Signed-off-by: Thomas Gleixner

clockevents: Add direct ktime programming function

2011-09-08T09:10:56Z

There is at least one architecture (s390) with a sane clockevent device that can be programmed with the equivalent of a ktime. No need to create a delta against the current time, the ktime can be used directly. A new clock device function 'set_next_ktime' is introduced that is called with the unmodified ktime for the timer if the clock event device has the CLOCK_EVT_FEAT_KTIME bit set. Signed-off-by: Martin Schwidefsky Cc: john stultz Link: http://lkml.kernel.org/r/20110823133142.815350967@de.ibm.com Signed-off-by: Thomas Gleixner

clockevents: Make minimum delay adjustments configurable

2011-09-08T09:10:56Z

The automatic increase of the min_delta_ns of a clockevents device should be done in the clockevents code as the minimum delay is an attribute of the clockevents device. In addition not all architectures want the automatic adjustment, on a massively virtualized system it can happen that the programming of a clock event fails several times in a row because the virtual cpu has been rescheduled quickly enough. In that case the minimum delay will erroneously be increased with no way back. The new config symbol GENERIC_CLOCKEVENTS_MIN_ADJUST is used to enable the automatic adjustment. The config option is selected only for x86. Signed-off-by: Martin Schwidefsky Cc: john stultz Link: http://lkml.kernel.org/r/20110823133142.494157493@de.ibm.com Signed-off-by: Thomas Gleixner

clockevents: Provide interface to reconfigure an active clock event device

2011-05-19T12:24:16Z

Some ARM SoCs have clock event devices which have their frequency modified due to frequency scaling. Provide an interface which allows to reconfigure an active device. After reconfiguration reprogram the current pending event. Signed-off-by: Thomas Gleixner Cc: LAK Cc: John Stultz Acked-by: Linus Walleij Reviewed-by: Ingo Molnar Link: http://lkml.kernel.org/r/%3C20110518210136.437459958%40linutronix.de%3E

clockevents: Provide combined configure and register function

2011-05-19T12:24:15Z

All clockevent devices have the same open coded initialization functions. Provide an interface which does all necessary initialization in the core code. Signed-off-by: Thomas Gleixner Cc: John Stultz Reviewed-by: Ingo Molnar Link: http://lkml.kernel.org/r/%3C20110518210136.331975870%40linutronix.de%3E

clockevents: Restructure clock_event_device members

2011-05-19T12:24:15Z

Group the hot path members of struct clock_event_device together so we have a better cache line footprint. Make it cacheline aligned. Signed-off-by: Thomas Gleixner Cc: John Stultz Reviewed-by: Ingo Molnar Link: http://lkml.kernel.org/r/%3C20110518210136.223607682%40linutronix.de%3E

clockevents: Sanitize min_delta_ns adjustment and prevent overflows

2010-03-12T18:10:29Z

The current logic which handles clock events programming failures can increase min_delta_ns unlimited and even can cause overflows. Sanitize it by: - prevent zero increase when min_delta_ns == 1 - limiting min_delta_ns to a jiffie - bail out if the jiffie limit is hit - add retries stats for /proc/timer_list so we can gather data Reported-by: Uwe Kleine-Koenig Signed-off-by: Thomas Gleixner

nohz: Allow 32-bit machines to sleep for more than 2.15 seconds

2009-11-13T19:46:24Z

In the dynamic tick code, "max_delta_ns" (member of the "clock_event_device" structure) represents the maximum sleep time that can occur between timer events in nanoseconds. The variable, "max_delta_ns", is defined as an unsigned long which is a 32-bit integer for 32-bit machines and a 64-bit integer for 64-bit machines (if -m64 option is used for gcc). The value of max_delta_ns is set by calling the function "clockevent_delta2ns()" which returns a maximum value of LONG_MAX. For a 32-bit machine LONG_MAX is equal to 0x7fffffff and in nanoseconds this equates to ~2.15 seconds. Hence, the maximum sleep time for a 32-bit machine is ~2.15 seconds, where as for a 64-bit machine it will be many years. This patch changes the type of max_delta_ns to be "u64" instead of "unsigned long" so that this variable is a 64-bit type for both 32-bit and 64-bit machines. It also changes the maximum value returned by clockevent_delta2ns() to KTIME_MAX. Hence this allows a 32-bit machine to sleep for longer than ~2.15 seconds. Please note that this patch also changes "min_delta_ns" to be "u64" too and although this is unnecessary, it makes the patch simpler as it avoids to fixup all callers of clockevent_delta2ns(). [ tglx: changed "unsigned long long" to u64 as we use this data type through out the time code ] Signed-off-by: Jon Hunter Cc: John Stultz LKML-Reference: <1250617512-23567-3-git-send-email-jon-hunter@ti.com> Signed-off-by: Thomas Gleixner

clocksource: Provide a generic mult/shift factor calculation

2009-11-13T19:46:23Z

MIPS has two functions to calculcate the mult/shift factors for clock sources and clock events at run time. ARM needs such functions as well. Implement a function which calculates the mult/shift factors based on the frequencies to which and from which is converted. The function also has a parameter to specify the minimum conversion range in seconds. This range is guaranteed not to produce a 64bit overflow when a value is multiplied with the calculated mult factor. The larger the conversion range the less becomes the conversion accuracy. Provide two inline wrappers which handle clock events and clock sources. For clock events the "from" frequency is nano seconds per second which corresponds to 1GHz and "to" is the device frequency. For clock sources "from" is the device frequency and "to" is nano seconds per second. Signed-off-by: Thomas Gleixner Tested-by: Mikael Pettersson Acked-by: Ralf Baechle Acked-by: Linus Walleij Cc: John Stultz LKML-Reference: <20091111134229.766673305@linutronix.de>

clockevents: Use u32 for mult and shift factors

2009-11-13T19:46:23Z

The mult and shift factors of clock events differ in their data type from those of clock sources for no reason. u32 is sufficient for both. shift is always <= 32 and mult is limited to 2^32-1 to avoid 64bit multiplication overflows in the conversion. Preparatory patch for a generic mult/shift factor calculation function. Signed-off-by: Thomas Gleixner Tested-by: Mikael Pettersson Acked-by: Ralf Baechle Acked-by: Linus Walleij Cc: John Stultz LKML-Reference: <20091111134229.725664788@linutronix.de>