user/sven/linux.git/include/linux/clocksource.h, branch v3.14.33

clocksource: Remove "weak" from clocksource_default_clock() declaration

2014-11-21T17:23:04Z

commit 96a2adbc6f501996418da9f7afe39bf0e4d006a9 upstream. kernel/time/jiffies.c provides a default clocksource_default_clock() definition explicitly marked "weak". arch/s390 provides its own definition intended to override the default, but the "weak" attribute on the declaration applied to the s390 definition as well, so the linker chose one based on link order (see 10629d711ed7 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the clocksource_default_clock() declaration so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: f1b82746c1e9 ("clocksource: Cleanup clocksource selection") Signed-off-by: Bjorn Helgaas Acked-by: John Stultz Acked-by: Ingo Molnar CC: Daniel Lezcano CC: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

clocksource: Extract max nsec calculation into separate function

2013-07-30T18:24:20Z

We need to calculate the same number in the clocksource code and the sched_clock code, so extract this code into its own function. We also drop the min_t and just use min() because the two types are the same. Signed-off-by: Stephen Boyd Signed-off-by: John Stultz

clocksource: Reselect clocksource when watchdog validated high-res capability

2013-07-05T09:09:28Z

Up to commit 5d33b883a (clocksource: Always verify highres capability) we had no sanity check when selecting a clocksource, which prevented that a non highres capable clocksource is used when the system already switched to highres/nohz mode. The new sanity check works as Alex and Tim found out. It prevents the TSC from being used. This happens because on x86 the boot process looks like this: tsc_start_freqency_validation(TSC); clocksource_register(HPET); clocksource_done_booting(); clocksource_select() Selects HPET which is valid for high-res switch_to_highres(); clocksource_register(TSC); TSC is not selected, because it is not yet flagged as VALID_HIGH_RES clocksource_watchdog() Validates TSC for highres, but that does not make TSC the current clocksource. Before the sanity check was added, we installed TSC unvalidated which worked most of the time. If the TSC was really detected as unstable, then the unstable logic removed it and installed HPET again. The sanity check is correct and needed. So the watchdog needs to kick a reselection of the clocksource, when it qualifies TSC as a valid high res clocksource. To solve this, we mark the clocksource which got the flag CLOCK_SOURCE_VALID_FOR_HRES set by the watchdog with an new flag CLOCK_SOURCE_RESELECT and trigger the watchdog thread. The watchdog thread evaluates the flag and invokes clocksource_select() when set. To avoid that the clocksource_done_booting() code, which is about to install the first real clocksource anyway, needs to go through clocksource_select and tick_oneshot_notify() pointlessly, split out the clocksource_watchdog_kthread() list walk code and invoke the select/notify only when called from clocksource_watchdog_kthread(). So clocksource_done_booting() can utilize the same splitout code without the select/notify invocation and the clocksource_mutex unlock/relock dance. Reported-and-tested-by: Alex Shi Cc: Hans Peter Anvin Cc: Tim Chen Cc: Andi Kleen Tested-by: Peter Zijlstra Cc: Ingo Molnar Cc: Davidlohr Bueso Cc: John Stultz Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307042239150.11637@ionos.tec.linutronix.de Signed-off-by: Thomas Gleixner

clocksource: Let clocksource_unregister() return success/error

2013-05-16T09:09:16Z

The unregister call can fail, if the clocksource is the current one and there is no replacement clocksource available. It can also fail, if the clocksource is the watchdog clocksource and I'm not going to provide support for this. Signed-off-by: Thomas Gleixner Cc: John Stultz Cc: Magnus Damm Link: http://lkml.kernel.org/r/20130425143436.029915527@linutronix.de Signed-off-by: Thomas Gleixner

clocksource: Add module refcount

2013-05-16T09:09:14Z

Add a module refcount, so the current clocksource cannot be removed unconditionally. Signed-off-by: Thomas Gleixner Cc: John Stultz Cc: Magnus Damm Link: http://lkml.kernel.org/r/20130425143435.762417789@linutronix.de Signed-off-by: Thomas Gleixner

clocksource: Let timekeeping_notify return success/error

2013-05-16T09:09:14Z

timekeeping_notify() can fail due cs->enable() failure. Though the caller does not notice and happily keeps the wrong clocksource as the current one. Let the caller know about failure, so the current clocksource will be shown correctly in sysfs. Signed-off-by: Thomas Gleixner Acked-by: John Stultz Cc: Magnus Damm Link: http://lkml.kernel.org/r/20130425143435.696321912@linutronix.de Signed-off-by: Thomas Gleixner

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-05-02T16:03:55Z

Pull ARM SoC cleanup from Olof Johansson: "Here is a collection of cleanup patches. Among the pieces that stand out are: - The deletion of h720x platforms - Split of at91 non-dt platforms to their own Kconfig file to keep them separate - General cleanups and refactoring of i.MX and MXS platforms - Some restructuring of clock tables for OMAP - Convertion of PMC driver for Tegra to dt-only - Some renames of sunxi -> sun4i (Allwinner A10) - ... plus a bunch of other stuff that I haven't mentioned" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits) ARM: i.MX: remove unused ARCH_* configs ARM i.MX53: remove platform ahci support ARM: sunxi: Rework the restart code irqchip: sunxi: Rename sunxi to sun4i irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro clocksource: sunxi: Rename sunxi to sun4i clocksource: sunxi: make use of CLKSRC_OF clocksource: sunxi: Cleanup the timer code ARM: at91: remove trailing semicolon from macros ARM: at91/setup: fix trivial typos ARM: EXYNOS: remove "config EXYNOS_DEV_DRM" ARM: EXYNOS: change the name of USB ohci header ARM: SAMSUNG: Remove unnecessary code for dma ARM: S3C24XX: Remove unused GPIO drive strength register definitions ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412 ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC" ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI" ...

clocksource: make CLOCKSOURCE_OF_DECLARE type safe

2013-03-28T11:01:06Z

This ensures that a function pointer passed into CLOCKSOURCE_OF_DECLARE takes the same arguments that we use for calling that function later. Also fix the extraneous semicolon at end of the CLOCKSOURCE_OF_DECLARE definition. Signed-off-by: Arnd Bergmann Acked-by: Rob Herring

clocksource: Add new feature flag CLOCK_SOURCE_SUSPEND_NONSTOP

2013-03-15T23:50:27Z

Some x86 processors have a TSC clocksource, which continues to run even when system is suspended. Also most OMAP platforms have a 32 KHz timer which has similar capability. Add a feature flag so that it could be utilized. Signed-off-by: Feng Tang Signed-off-by: John Stultz

clocksource: add empty version of clocksource_of_init

2013-03-11T13:40:12Z

Add an empty clocksource_of_init when !CLKSRC_OF. This is needed for builds where no timer has selected CLKSRC_OF. Signed-off-by: Rob Herring Cc: John Stultz Cc: Thomas Gleixner