user/sven/linux.git/include/linux/clocksource.h, branch v4.2.4

Merge branch 'linus' into timers/core

2015-05-19T14:12:32Z

Make sure the upstream fixes are applied before adding further modifications.

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2015-04-24T15:23:45Z

Pull initial ACPI support for arm64 from Will Deacon: "This series introduces preliminary ACPI 5.1 support to the arm64 kernel using the "hardware reduced" profile. We don't support any peripherals yet, so it's fairly limited in scope: - MEMORY init (UEFI) - ACPI discovery (RSDP via UEFI) - CPU init (FADT) - GIC init (MADT) - SMP boot (MADT + PSCI) - ACPI Kconfig options (dependent on EXPERT) ACPI for arm64 has been in development for a while now and hardware has been available that can boot with either FDT or ACPI tables. This has been made possible by both changes to the ACPI spec to cater for ARM-based machines (known as "hardware-reduced" in ACPI parlance) but also a Linaro-driven effort to get this supported on top of the Linux kernel. This pull request is the result of that work. These changes allow us to initialise the CPUs, interrupt controller, and timers via ACPI tables, with memory information and cmdline coming from EFI. We don't support a hybrid ACPI/FDT scheme. Of course, there is still plenty of work to do (a serial console would be nice!) but I expect that to happen on a per-driver basis after this core series has been merged. Anyway, the diff stat here is fairly horrible, but splitting this up and merging it via all the different subsystems would have been extremely painful. Instead, we've got all the relevant Acks in place and I've not seen anything other than trivial (Kconfig) conflicts in -next (for completeness, I've included my resolution below). Nearly half of the insertions fall under Documentation/. So, we'll see how this goes. Right now, it all depends on EXPERT and I fully expect people to use FDT by default for the immediate future" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (31 commits) ARM64 / ACPI: make acpi_map_gic_cpu_interface() as void function ARM64 / ACPI: Ignore the return error value of acpi_map_gic_cpu_interface() ARM64 / ACPI: fix usage of acpi_map_gic_cpu_interface ARM64: kernel: acpi: honour acpi=force command line parameter ARM64: kernel: acpi: refactor ACPI tables init and checks ARM64: kernel: psci: let ACPI probe PSCI version ARM64: kernel: psci: factor out probe function ACPI: move arm64 GSI IRQ model to generic GSI IRQ layer ARM64 / ACPI: Don't unflatten device tree if acpi=force is passed ARM64 / ACPI: additions of ACPI documentation for arm64 Documentation: ACPI for ARM64 ARM64 / ACPI: Enable ARM64 in Kconfig XEN / ACPI: Make XEN ACPI depend on X86 ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 clocksource / arch_timer: Parse GTDT to initialize arch timer irqchip: Add GICv2 specific ACPI boot support ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi ACPI / processor: Make it possible to get CPU hardware ID via GICC ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID ARM64 / ACPI: Parse MADT for SMP initialization ...

time: Remove nonexistent function prototype

2015-04-22T10:03:39Z

The function clocksource_get_next() was removed in commit 75c5158f70 (timekeeping: Update clocksource with stop_machine), but the prototype was not removed with it. Remove the prototype. Signed-off-by: Yingjoe Chen Cc: Cc: Martin Schwidefsky Cc: Cc: John Stultz Link: http://lkml.kernel.org/r/1428674150-1780-1-git-send-email-yingjoe.chen@mediatek.com Signed-off-by: Thomas Gleixner

clocksource / arch_timer: Parse GTDT to initialize arch timer

2015-03-26T15:13:07Z

Using the information presented by GTDT (Generic Timer Description Table) to initialize the arch timer (not memory-mapped). CC: Daniel Lezcano CC: Thomas Gleixner Originally-by: Amit Daniel Kachhap Tested-by: Suravee Suthikulpanit Tested-by: Yijing Wang Tested-by: Mark Langsdorf Tested-by: Jon Masters Tested-by: Timur Tabi Tested-by: Robert Richter Acked-by: Robert Richter Acked-by: Daniel Lezcano Reviewed-by: Grant Likely Signed-off-by: Hanjun Guo Signed-off-by: Will Deacon

clocksource: Rename __clocksource_updatefreq_() to __clocksource_update_freq_()

2015-03-13T07:07:08Z

Ingo requested this function be renamed to improve readability, so I've renamed __clocksource_updatefreq_scale() as well as the __clocksource_updatefreq_hz/khz() functions to avoid squishedtogethernames. This touches some of the sh clocksources, which I've not tested. The arch/arm/plat-omap change is just a comment change for consistency. Signed-off-by: John Stultz Cc: Daniel Lezcano Cc: Dave Jones Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Prarit Bhargava Cc: Richard Cochran Cc: Stephen Boyd Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1426133800-29329-13-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar

clocksource: Mostly kill clocksource_register()

2015-03-13T07:07:06Z

A long running project has been to clean up remaining uses of clocksource_register(), replacing it with the simpler clocksource_register_khz/hz() functions. However, there are a few cases where we need to self-define our mult/shift values, so switch the function to a more obviously internal __clocksource_register() name, and consolidate much of the internal logic so we don't have duplication. Signed-off-by: John Stultz Cc: Dave Jones Cc: David S. Miller Cc: Linus Torvalds Cc: Martin Schwidefsky Cc: Peter Zijlstra Cc: Prarit Bhargava Cc: Richard Cochran Cc: Stephen Boyd Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1426133800-29329-10-git-send-email-john.stultz@linaro.org [ Minor cleanups. ] Signed-off-by: Ingo Molnar

clocksource: Add 'max_cycles' to 'struct clocksource'

2015-03-12T09:16:38Z

In order to facilitate clocksource validation, add a 'max_cycles' field to the clocksource structure which will hold the maximum cycle value that can safely be multiplied without potentially causing an overflow. Signed-off-by: John Stultz Cc: Dave Jones Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Prarit Bhargava Cc: Richard Cochran Cc: Stephen Boyd Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1426133800-29329-4-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar

time: move the timecounter/cyclecounter code into its own file.

2014-12-30T23:29:25Z

The timecounter code has almost nothing to do with the clocksource code. Let it live in its own file. This will help isolate the timecounter users from the clocksource users in the source tree. Signed-off-by: Richard Cochran Acked-by: Jeff Kirsher Signed-off-by: David S. Miller

clocksource: Remove "weak" from clocksource_default_clock() declaration

2014-10-22T22:14:03Z

kernel/time/jiffies.c provides a default clocksource_default_clock() definition explicitly marked "weak". arch/s390 provides its own definition intended to override the default, but the "weak" attribute on the declaration applied to the s390 definition as well, so the linker chose one based on link order (see 10629d711ed7 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node decl")). Remove the "weak" attribute from the clocksource_default_clock() declaration so we always prefer a non-weak definition over the weak one, independent of link order. Fixes: f1b82746c1e9 ("clocksource: Cleanup clocksource selection") Signed-off-by: Bjorn Helgaas Acked-by: John Stultz Acked-by: Ingo Molnar CC: Daniel Lezcano CC: Martin Schwidefsky

clocksource: Get rid of cycle_last

2014-07-23T22:01:52Z

cycle_last was added to the clocksource to support the TSC validation. We moved that to the core code, so we can get rid of the extra copy. Signed-off-by: Thomas Gleixner Signed-off-by: John Stultz