user/sven/linux.git/include/linux/cpu.h, branch v3.9.8

CPU hotplug: provide a generic helper to disable/enable CPU hotplug

2013-06-20T19:01:29Z

commit 16e53dbf10a2d7e228709a7286310e629ede5e45 upstream. There are instances in the kernel where we would like to disable CPU hotplug (from sysfs) during some important operation. Today the freezer code depends on this and the code to do it was kinda tailor-made for that. Restructure the code and make it generic enough to be useful for other usecases too. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Robin Holt Cc: H. Peter Anvin Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Russ Anderson Cc: Robin Holt Cc: Russell King Cc: Guan Xuetao Cc: Shawn Guo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

workqueue: perform cpu down operations from low priority cpu_notifier()

2012-07-17T19:39:26Z

Currently, all workqueue cpu hotplug operations run off CPU_PRI_WORKQUEUE which is higher than normal notifiers. This is to ensure that workqueue is up and running while bringing up a CPU before other notifiers try to use workqueue on the CPU. Per-cpu workqueues are supposed to remain working and bound to the CPU for normal CPU_DOWN_PREPARE notifiers. This holds mostly true even with workqueue offlining running with higher priority because workqueue CPU_DOWN_PREPARE only creates a bound trustee thread which runs the per-cpu workqueue without concurrency management without explicitly detaching the existing workers. However, if the trustee needs to create new workers, it creates unbound workers which may wander off to other CPUs while CPU_DOWN_PREPARE notifiers are in progress. Furthermore, if the CPU down is cancelled, the per-CPU workqueue may end up with workers which aren't bound to the CPU. While reliably reproducible with a convoluted artificial test-case involving scheduling and flushing CPU burning work items from CPU down notifiers, this isn't very likely to happen in the wild, and, even when it happens, the effects are likely to be hidden by the following successful CPU down. Fix it by using different priorities for up and down notifiers - high priority for up operations and low priority for down operations. Workqueue cpu hotplug operations will soon go through further cleanup. Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Acked-by: "Rafael J. Wysocki"

cpu: introduce clear_tasks_mm_cpumask() helper

2012-06-01T00:49:29Z

Many architectures clear tasks' mm_cpumask like this: read_lock(&tasklist_lock); for_each_process(p) { if (p->mm) cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); } read_unlock(&tasklist_lock); Depending on the context, the code above may have several problems, such as: 1. Working with task->mm w/o getting mm or grabing the task lock is dangerous as ->mm might disappear (exit_mm() assigns NULL under task_lock(), so tasklist lock is not enough). 2. Checking for process->mm is not enough because process' main thread may exit or detach its mm via use_mm(), but other threads may still have a valid mm. This patch implements a small helper function that does things correctly, i.e.: 1. We take the task's lock while whe handle its mm (we can't use get_task_mm()/mmput() pair as mmput() might sleep); 2. To catch exited main thread case, we use find_lock_task_mm(), which walks up all threads and returns an appropriate task (with task lock held). Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in the new helper, instead we take the rcu read lock. We can do this because the function is called after the cpu is taken down and marked offline, so no new tasks will get this cpu set in their mm mask. Signed-off-by: Anton Vorontsov Cc: Richard Weinberger Cc: Oleg Nesterov Cc: Peter Zijlstra Cc: Russell King Cc: Benjamin Herrenschmidt Cc: Mike Frysinger Cc: Paul Mundt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

sched: Remove stale power aware scheduling remnants and dysfunctional knobs

2012-05-17T11:48:56Z

It's been broken forever (i.e. it's not scheduling in a power aware fashion), as reported by Suresh and others sending patches, and nobody cares enough to fix it properly ... so remove it to make space free for something better. There's various problems with the code as it stands today, first and foremost the user interface which is bound to topology levels and has multiple values per level. This results in a state explosion which the administrator or distro needs to master and almost nobody does. Furthermore large configuration state spaces aren't good, it means the thing doesn't just work right because it's either under so many impossibe to meet constraints, or even if there's an achievable state workloads have to be aware of it precisely and can never meet it for dynamic workloads. So pushing this kind of decision to user-space was a bad idea even with a single knob - it's exponentially worse with knobs on every node of the topology. There is a proposal to replace the user interface with a single 3 state knob: sched_balance_policy := { performance, power, auto } where 'auto' would be the preferred default which looks at things like Battery/AC mode and possible cpufreq state or whatever the hw exposes to show us power use expectations - but there's been no progress on it in the past many months. Aside from that, the actual implementation of the various knobs is known to be broken. There have been sporadic attempts at fixing things but these always stop short of reaching a mergable state. Therefore this wholesale removal with the hopes of spurring people who care to come forward once again and work on a coherent replacement. Signed-off-by: Peter Zijlstra Cc: Suresh Siddha Cc: Arjan van de Ven Cc: Vincent Guittot Cc: Vaidyanathan Srinivasan Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1326104915.2442.53.camel@twins Signed-off-by: Ingo Molnar

Merge tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2012-03-24T17:41:37Z

Pull avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)

device.h: audit and cleanup users in main include dir

2012-03-16T14:38:24Z

The header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker

CPU: Introduce ARCH_HAS_CPU_AUTOPROBE and X86 parts

2012-01-27T00:49:08Z

This patch is based on Andi Kleen's work: Implement autoprobing/loading of modules serving CPU specific features (x86cpu autoloading). And Kay Siever's work to get rid of sysdev cpu structures and making use of struct device instead. Before, the cpuid driver had to be loaded to get the x86cpu autoloading feature. With this patch autoloading works through the /sys/devices/system/cpu object Cc: Kay Sievers Cc: Dave Jones Cc: Jens Axboe Cc: Herbert Xu Cc: Huang Ying Cc: Len Brown Acked-by: Andi Kleen Signed-off-by: Thomas Renninger Acked-by: H. Peter Anvin Signed-off-by: Greg Kroah-Hartman

Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2012-01-07T20:03:30Z

* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h

cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem

2011-12-21T22:29:42Z

This moves the 'cpu sysdev_class' over to a regular 'cpu' subsystem and converts the devices to regular devices. The sysdev drivers are implemented as subsystem interfaces now. After all sysdev classes are ported to regular driver core entities, the sysdev implementation will be entirely removed from the kernel. Userspace relies on events and generic sysfs subsystem infrastructure from sysdev devices, which are made available with this conversion. Cc: Haavard Skinnemoen Cc: Hans-Christian Egtvedt Cc: Tony Luck Cc: Fenghua Yu Cc: Arnd Bergmann Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Paul Mundt Cc: "David S. Miller" Cc: Chris Metcalf Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Borislav Petkov Cc: Tigran Aivazian Cc: Len Brown Cc: Zhang Rui Cc: Dave Jones Cc: Peter Zijlstra Cc: Russell King Cc: Andrew Morton Cc: Arjan van de Ven Cc: "Rafael J. Wysocki" Cc: "Srivatsa S. Bhat" Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman

driver-core/cpu: Expose hotpluggability to the rest of the kernel

2011-12-11T18:32:20Z

When architectures register CPUs, they indicate whether the CPU allows hotplugging; notably, x86 and ARM don't allow hotplugging CPU 0. Userspace can easily query the hotpluggability of a CPU via sysfs; however, the kernel has no convenient way of accessing that property in an architecture-independent way. While the kernel can simply try it and see, some code needs to distinguish between "hotplug failed" and "hotplug has no hope of working on this CPU"; for example, rcutorture's CPU hotplug tests want to avoid drowning out real hotplug failures with expected failures. Expose this property via a new cpu_is_hotpluggable function, so that the rest of the kernel can access it in an architecture-independent way. Signed-off-by: Josh Triplett Signed-off-by: Paul E. McKenney