user/sven/linux.git/include/linux/cpu.h, branch v4.9.5

hotplug: Make register and unregister notifier API symmetric

2017-01-06T09:40:10Z

commit 777c6e0daebb3fcefbbd6f620410a946b07ef6d0 upstream. Yu Zhao has noticed that __unregister_cpu_notifier only unregisters its notifiers when HOTPLUG_CPU=y while the registration might succeed even when HOTPLUG_CPU=n if MODULE is enabled. This means that e.g. zswap might keep a stale notifier on the list on the manual clean up during the pool tear down and thus corrupt the list. Resulting in the following [ 144.964346] BUG: unable to handle kernel paging request at ffff880658a2be78 [ 144.971337] IP: [] raw_notifier_chain_register+0x1b/0x40 [ 145.122628] Call Trace: [ 145.125086] [] __register_cpu_notifier+0x18/0x20 [ 145.131350] [] zswap_pool_create+0x273/0x400 [ 145.137268] [] __zswap_param_set+0x1fc/0x300 [ 145.143188] [] ? trace_hardirqs_on+0xd/0x10 [ 145.149018] [] ? kernel_param_lock+0x28/0x30 [ 145.154940] [] ? __might_fault+0x4f/0xa0 [ 145.160511] [] zswap_compressor_param_set+0x17/0x20 [ 145.167035] [] param_attr_store+0x5c/0xb0 [ 145.172694] [] module_attr_store+0x1d/0x30 [ 145.178443] [] sysfs_kf_write+0x4f/0x70 [ 145.183925] [] kernfs_fop_write+0x149/0x180 [ 145.189761] [] __vfs_write+0x18/0x40 [ 145.194982] [] vfs_write+0xb2/0x1a0 [ 145.200122] [] SyS_write+0x52/0xa0 [ 145.205177] [] entry_SYSCALL_64_fastpath+0x12/0x17 This can be even triggered manually by changing /sys/module/zswap/parameters/compressor multiple times. Fix this issue by making unregister APIs symmetric to the register so there are no surprises. Fixes: 47e627bc8c9a ("[PATCH] hotplug: Allow modules to use the cpu hotplug notifiers even if !CONFIG_HOTPLUG_CPU") Reported-and-tested-by: Yu Zhao Signed-off-by: Michal Hocko Cc: linux-mm@kvack.org Cc: Andrew Morton Cc: Dan Streetman Link: http://lkml.kernel.org/r/20161207135438.4310-1-mhocko@kernel.org Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

nmi_backtrace: generate one-line reports for idle cpus

2016-10-08T01:46:30Z

When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf Acked-by: Peter Zijlstra (Intel) Tested-by: Peter Zijlstra (Intel) Tested-by: Daniel Thompson [arm] Tested-by: Petr Mladek Cc: Aaron Tomlin Cc: Peter Zijlstra (Intel) Cc: "Rafael J. Wysocki" Cc: Russell King Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-10-04T02:43:08Z

Pull CPU hotplug updates from Thomas Gleixner: "Yet another batch of cpu hotplug core updates and conversions: - Provide core infrastructure for multi instance drivers so the drivers do not have to keep custom lists. - Convert custom lists to the new infrastructure. The block-mq custom list conversion comes through the block tree and makes the diffstat tip over to more lines removed than added. - Handle unbalanced hotplug enable/disable calls more gracefully. - Remove the obsolete CPU_STARTING/DYING notifier support. - Convert another batch of notifier users. The relayfs changes which conflicted with the conversion have been shipped to me by Andrew. The remaining lot is targeted for 4.10 so that we finally can remove the rest of the notifiers" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) cpufreq: Fix up conversion to hotplug state machine blk/mq: Reserve hotplug states for block multiqueue x86/apic/uv: Convert to hotplug state machine s390/mm/pfault: Convert to hotplug state machine mips/loongson/smp: Convert to hotplug state machine mips/octeon/smp: Convert to hotplug state machine fault-injection/cpu: Convert to hotplug state machine padata: Convert to hotplug state machine cpufreq: Convert to hotplug state machine ACPI/processor: Convert to hotplug state machine virtio scsi: Convert to hotplug state machine oprofile/timer: Convert to hotplug state machine block/softirq: Convert to hotplug state machine lib/irq_poll: Convert to hotplug state machine x86/microcode: Convert to hotplug state machine sh/SH-X3 SMP: Convert to hotplug state machine ia64/mca: Convert to hotplug state machine ARM/OMAP/wakeupgen: Convert to hotplug state machine ARM/shmobile: Convert to hotplug state machine arm64/FP/SIMD: Convert to hotplug state machine ...

cpu/hotplug: Remove CPU_STARTING and CPU_DYING notifier

2016-09-06T16:30:19Z

All users are converted to state machine, remove CPU_STARTING and the corresponding CPU_DYING. Signed-off-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Cc: Peter Zijlstra Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160818125731.27256-2-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner

cpu/hotplug: Allow suspend/resume CPU to be specified

2016-08-26T10:20:11Z

disable_nonboot_cpus() assumes that the lowest numbered online CPU is the boot CPU, and that this is the correct CPU to run any power management code on. On x86 this is always correct, as CPU0 cannot (easily) by taken offline. On arm64 CPU0 can be taken offline. For hibernate/resume this means we may hibernate on a CPU other than CPU0. If the system is rebooted with kexec 'CPU0' will be assigned to a different physical CPU. This complicates hibernate/resume as now we can't trust the CPU numbers. Arch code can find the correct physical CPU, and ensure it is online before resume from hibernate begins, but also needs to influence disable_nonboot_cpus()s choice of CPU. Rename disable_nonboot_cpus() as freeze_secondary_cpus() and add an argument indicating which CPU should be left standing. Follow the logic in migrate_to_reboot_cpu() to use the lowest numbered online CPU if the requested CPU is not online. Add disable_nonboot_cpus() as an inline function that has the existing behaviour. Cc: Rafael J. Wysocki Reviewed-by: Thomas Gleixner Signed-off-by: James Morse Signed-off-by: Will Deacon

workqueue: Convert to state machine callbacks

2016-07-14T07:34:43Z

Get rid of the prio ordering of the separate notifiers and use a proper state callback pair. Signed-off-by: Thomas Gleixner Signed-off-by: Anna-Maria Gleixner Reviewed-by: Sebastian Andrzej Siewior Acked-by: Tejun Heo Cc: Andrew Morton Cc: Lai Jiangshan Cc: Linus Torvalds Cc: Nicolas Iooss Cc: Oleg Nesterov Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: Rasmus Villemoes Cc: Rusty Russell Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153335.197083890@linutronix.de Signed-off-by: Ingo Molnar

perf/core: Remove perf CPU notifier code

2016-07-14T07:34:42Z

All users converted to state machine callbacks. Signed-off-by: Thomas Gleixner Signed-off-by: Anna-Maria Gleixner Reviewed-by: Sebastian Andrzej Siewior Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Linus Torvalds Cc: Nicolas Iooss Cc: Paul E. McKenney Cc: Peter Zijlstra Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153335.115333381@linutronix.de Signed-off-by: Ingo Molnar

sched/hotplug: Move migration CPU_DYING to sched_cpu_dying()

2016-05-06T12:58:25Z

Remove the hotplug notifier and make it an explicit state. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160310120025.502222097@linutronix.de Signed-off-by: Thomas Gleixner

sched/hotplug: Convert cpu_[in]active notifiers to state machine

2016-05-06T12:58:24Z

Now that we reduced everything into single notifiers, it's simple to move them into the hotplug state machine space. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Cc: rt@linutronix.de Signed-off-by: Thomas Gleixner

sched: Consolidate the notifier maze

2016-05-06T12:58:23Z

We can maintain the ordering of the scheduler cpu hotplug functionality nicely in one notifer. Get rid of the maze. Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Cc: rt@linutronix.de Signed-off-by: Thomas Gleixner