user/sven/linux.git/include/linux/cpuhotplug.h, branch v6.4.9

x86/hyperv: Fix hyperv_pcpu_input_arg handling when CPUs go online/offline

2023-06-17T23:09:47Z

These commits a494aef23dfc ("PCI: hv: Replace retarget_msi_interrupt_params with hyperv_pcpu_input_arg") 2c6ba4216844 ("PCI: hv: Enable PCI pass-thru devices in Confidential VMs") update the Hyper-V virtual PCI driver to use the hyperv_pcpu_input_arg because that memory will be correctly marked as decrypted or encrypted for all VM types (CoCo or normal). But problems ensue when CPUs in the VM go online or offline after virtual PCI devices have been configured. When a CPU is brought online, the hyperv_pcpu_input_arg for that CPU is initialized by hv_cpu_init() running under state CPUHP_AP_ONLINE_DYN. But this state occurs after state CPUHP_AP_IRQ_AFFINITY_ONLINE, which may call the virtual PCI driver and fault trying to use the as yet uninitialized hyperv_pcpu_input_arg. A similar problem occurs in a CoCo VM if the MMIO read and write hypercalls are used from state CPUHP_AP_IRQ_AFFINITY_ONLINE. When a CPU is taken offline, IRQs may be reassigned in state CPUHP_TEARDOWN_CPU. Again, the virtual PCI driver may fault trying to use the hyperv_pcpu_input_arg that has already been freed by a higher state. Fix the onlining problem by adding state CPUHP_AP_HYPERV_ONLINE immediately after CPUHP_AP_ONLINE_IDLE (similar to CPUHP_AP_KVM_ONLINE) and before CPUHP_AP_IRQ_AFFINITY_ONLINE. Use this new state for Hyper-V initialization so that hyperv_pcpu_input_arg is allocated early enough. Fix the offlining problem by not freeing hyperv_pcpu_input_arg when a CPU goes offline. Retain the allocated memory, and reuse it if the CPU comes back online later. Signed-off-by: Michael Kelley Reviewed-by: Vitaly Kuznetsov Acked-by: Borislav Petkov (AMD) Reviewed-by: Dexuan Cui Link: https://lore.kernel.org/r/1684862062-51576-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2023-04-25T19:39:01Z

Pull arm64 updates from Will Deacon: "ACPI: - Improve error reporting when failing to manage SDEI on AGDI device removal Assembly routines: - Improve register constraints so that the compiler can make use of the zero register instead of moving an immediate #0 into a GPR - Allow the compiler to allocate the registers used for CAS instructions CPU features and system registers: - Cleanups to the way in which CPU features are identified from the ID register fields - Extend system register definition generation to handle Enum types when defining shared register fields - Generate definitions for new _EL2 registers and add new fields for ID_AA64PFR1_EL1 - Allow SVE to be disabled separately from SME on the kernel command-line Tracing: - Support for "direct calls" in ftrace, which enables BPF tracing for arm64 Kdump: - Don't bother unmapping the crashkernel from the linear mapping, which then allows us to use huge (block) mappings and reduce TLB pressure when a crashkernel is loaded. Memory management: - Try again to remove data cache invalidation from the coherent DMA allocation path - Simplify the fixmap code by mapping at page granularity - Allow the kfence pool to be allocated early, preventing the rest of the linear mapping from being forced to page granularity Perf and PMU: - Move CPU PMU code out to drivers/perf/ where it can be reused by the 32-bit ARM architecture when running on ARMv8 CPUs - Fix race between CPU PMU probing and pKVM host de-privilege - Add support for Apple M2 CPU PMU - Adjust the generic PERF_COUNT_HW_BRANCH_INSTRUCTIONS event dynamically, depending on what the CPU actually supports - Minor fixes and cleanups to system PMU drivers Stack tracing: - Use the XPACLRI instruction to strip PAC from pointers, rather than rolling our own function in C - Remove redundant PAC removal for toolchains that handle this in their builtins - Make backtracing more resilient in the face of instrumentation Miscellaneous: - Fix single-step with KGDB - Remove harmless warning when 'nokaslr' is passed on the kernel command-line - Minor fixes and cleanups across the board" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits) KVM: arm64: Ensure CPU PMU probes before pKVM host de-privilege arm64: kexec: include reboot.h arm64: delete dead code in this_cpu_set_vectors() arm64/cpufeature: Use helper macro to specify ID register for capabilites drivers/perf: hisi: add NULL check for name drivers/perf: hisi: Remove redundant initialized of pmu->name arm64/cpufeature: Consistently use symbolic constants for min_field_value arm64/cpufeature: Pull out helper for CPUID register definitions arm64/sysreg: Convert HFGITR_EL2 to automatic generation ACPI: AGDI: Improve error reporting for problems during .remove() arm64: kernel: Fix kernel warning when nokaslr is passed to commandline perf/arm-cmn: Fix port detection for CMN-700 arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step arm64: move PAC masks to arm64: use XPACLRI to strip PAC arm64: avoid redundant PAC stripping in __builtin_return_address() arm64/sme: Fix some comments of ARM SME arm64/signal: Alloc tpidr2 sigframe after checking system_supports_tpidr2() arm64/signal: Use system_supports_tpidr2() to check TPIDR2 arm64/idreg: Don't disable SME when disabling SVE ...

iommu/vt-d: Fix an IOMMU perfmon warning when CPU hotplug

2023-03-31T08:06:16Z

A warning can be triggered when hotplug CPU 0. $ echo 0 > /sys/devices/system/cpu/cpu0/online ------------[ cut here ]------------ Voluntary context switch within RCU read-side critical section! WARNING: CPU: 0 PID: 19 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x4f4/0x580 RIP: 0010:rcu_note_context_switch+0x4f4/0x580 Call Trace: ? perf_event_update_userpage+0x104/0x150 __schedule+0x8d/0x960 ? perf_event_set_state.part.82+0x11/0x50 schedule+0x44/0xb0 schedule_timeout+0x226/0x310 ? __perf_event_disable+0x64/0x1a0 ? _raw_spin_unlock+0x14/0x30 wait_for_completion+0x94/0x130 __wait_rcu_gp+0x108/0x130 synchronize_rcu+0x67/0x70 ? invoke_rcu_core+0xb0/0xb0 ? __bpf_trace_rcu_stall_warning+0x10/0x10 perf_pmu_migrate_context+0x121/0x370 iommu_pmu_cpu_offline+0x6a/0xa0 ? iommu_pmu_del+0x1e0/0x1e0 cpuhp_invoke_callback+0x129/0x510 cpuhp_thread_fun+0x94/0x150 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 ---[ end trace 0000000000000000 ]--- The synchronize_rcu() will be invoked in the perf_pmu_migrate_context(), when migrating a PMU to a new CPU. However, the current for_each_iommu() is within RCU read-side critical section. Two methods were considered to fix the issue. - Use the dmar_global_lock to replace the RCU read lock when going through the drhd list. But it triggers a lockdep warning. - Use the cpuhp_setup_state_multi() to set up a dedicated state for each IOMMU PMU. The lock can be avoided. The latter method is implemented in this patch. Since each IOMMU PMU has a dedicated state, add cpuhp_node and cpu in struct iommu_pmu to track the state. The state can be dynamically allocated now. Remove the CPUHP_AP_PERF_X86_IOMMU_PERF_ONLINE. Fixes: 46284c6ceb5e ("iommu/vt-d: Support cpumask for IOMMU perfmon") Reported-by: Ammy Yi Signed-off-by: Kan Liang Link: https://lore.kernel.org/r/20230328182028.1366416-1-kan.liang@linux.intel.com Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20230329134721.469447-4-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel

firmware: arm_sdei: Fix sleep from invalid context BUG

2023-03-28T14:21:35Z

Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/ Suggested-by: James Morse Signed-off-by: Pierre Gondois Reviewed-by: James Morse Link: https://lore.kernel.org/r/20230216084920.144064-1-pierre.gondois@arm.com Signed-off-by: Will Deacon

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2023-02-25T19:30:21Z

Pull kvm updates from Paolo Bonzini: "ARM: - Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company) - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add [Oliver] as co-maintainer RISC-V: - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE - Correctly place the guest in S-mode after redirecting a trap to the guest - Redirect illegal instruction traps to guest - SBI PMU support for guest s390: - Sort out confusion between virtual and physical addresses, which currently are the same on s390 - A new ioctl that performs cmpxchg on guest memory - A few fixes x86: - Change tdp_mmu to a read-only parameter - Separate TDP and shadow MMU page fault paths - Enable Hyper-V invariant TSC control - Fix a variety of APICv and AVIC bugs, some of them real-world, some of them affecting architecurally legal but unlikely to happen in practice - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Advertise support for Intel's new fast REP string features - Fix a double-shootdown issue in the emergency reboot code - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM similar treatment to VMX - Update Xen's TSC info CPUID sub-leaves as appropriate - Add support for Hyper-V's extended hypercalls, where "support" at this point is just forwarding the hypercalls to userspace - Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and MSR filters - One-off fixes and cleanups - Fix and cleanup the range-based TLB flushing code, used when KVM is running on Hyper-V - Add support for filtering PMU events using a mask. If userspace wants to restrict heavily what events the guest can use, it can now do so without needing an absurd number of filter entries - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU support is disabled - Add PEBS support for Intel Sapphire Rapids - Fix a mostly benign overflow bug in SEV's send|receive_update_data() - Move several SVM-specific flags into vcpu_svm x86 Intel: - Handle NMI VM-Exits before leaving the noinstr region - A few trivial cleanups in the VM-Enter flows - Stop enabling VMFUNC for L1 purely to document that KVM doesn't support EPTP switching (or any other VM function) for L1 - Fix a crash when using eVMCS's enlighted MSR bitmaps Generic: - Clean up the hardware enable and initialization flow, which was scattered around multiple arch-specific hooks. Instead, just let the arch code call into generic code. Both x86 and ARM should benefit from not having to fight common KVM code's notion of how to do initialization - Account allocations in generic kvm_arch_alloc_vm() - Fix a memory leak if coalesced MMIO unregistration fails selftests: - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct hypercall instruction instead of relying on KVM to patch in VMMCALL - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits) KVM: SVM: hyper-v: placate modpost section mismatch error KVM: x86/mmu: Make tdp_mmu_allowed static KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes KVM: arm64: nv: Filter out unsupported features from ID regs KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2 KVM: arm64: nv: Allow a sysreg to be hidden from userspace only KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2 KVM: arm64: nv: Handle SMCs taken from virtual EL2 KVM: arm64: nv: Handle trapped ERET from virtual EL2 KVM: arm64: nv: Inject HVC exceptions to the virtual EL2 KVM: arm64: nv: Support virtual EL2 exceptions KVM: arm64: nv: Handle HCR_EL2.NV system register traps KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state KVM: arm64: nv: Add EL2 system registers to vcpu context KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set KVM: arm64: nv: Introduce nested virtualization VCPU feature KVM: arm64: Use the S2 MMU context to iterate over S2 table ...

iommu/vt-d: Support cpumask for IOMMU perfmon

2023-02-03T10:06:08Z

The perf subsystem assumes that all counters are by default per-CPU. So the user space tool reads a counter from each CPU. However, the IOMMU counters are system-wide and can be read from any CPU. Here we use a CPU mask to restrict counting to one CPU to handle the issue. (with CPU hotplug notifier to choose a different CPU if the chosen one is taken off-line). The CPU is exposed to /sys/bus/event_source/devices/dmar*/cpumask for the user space perf tool. Signed-off-by: Kan Liang Link: https://lore.kernel.org/r/20230128200428.1459118-6-kan.liang@linux.intel.com Signed-off-by: Lu Baolu Signed-off-by: Joerg Roedel

KVM: Rename and move CPUHP_AP_KVM_STARTING to ONLINE section

2022-12-29T20:48:32Z

The CPU STARTING section doesn't allow callbacks to fail. Move KVM's hotplug callback to ONLINE section so that it can abort onlining a CPU in certain cases to avoid potentially breaking VMs running on existing CPUs. For example, when KVM fails to enable hardware virtualization on the hotplugged CPU. Place KVM's hotplug state before CPUHP_AP_SCHED_WAIT_EMPTY as it ensures when offlining a CPU, all user tasks and non-pinned kernel tasks have left the CPU, i.e. there cannot be a vCPU task around. So, it is safe for KVM's CPU offline callback to disable hardware virtualization at that point. Likewise, KVM's online callback can enable hardware virtualization before any vCPU task gets a chance to run on hotplugged CPUs. Drop kvm_x86_check_processor_compatibility()'s WARN that IRQs are disabled, as the ONLINE section runs with IRQs disabled. The WARN wasn't intended to be a requirement, e.g. disabling preemption is sufficient, the IRQ thing was purely an aggressive sanity check since the helper was only ever invoked via SMP function call. Rename KVM's CPU hotplug callbacks accordingly. Suggested-by: Thomas Gleixner Signed-off-by: Chao Gao Signed-off-by: Isaku Yamahata Reviewed-by: Yuan Yao [sean: drop WARN that IRQs are disabled] Signed-off-by: Sean Christopherson Message-Id: <20221130230934.1014142-42-seanjc@google.com> Signed-off-by: Paolo Bonzini

KVM: arm64: Simplify the CPUHP logic

2022-12-29T20:41:04Z

For a number of historical reasons, the KVM/arm64 hotplug setup is pretty complicated, and we have two extra CPUHP notifiers for vGIC and timers. It looks pretty pointless, and gets in the way of further changes. So let's just expose some helpers that can be called from the core CPUHP callback, and get rid of everything else. This gives us the opportunity to drop a useless notifier entry, as well as tidy-up the timer enable/disable, which was a bit odd. Signed-off-by: Marc Zyngier Signed-off-by: Isaku Yamahata Signed-off-by: Sean Christopherson Message-Id: <20221130230934.1014142-17-seanjc@google.com> Signed-off-by: Paolo Bonzini

Merge tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2022-12-13T23:47:48Z

Pull networking updates from Paolo Abeni: "Core: - Allow live renaming when an interface is up - Add retpoline wrappers for tc, improving considerably the performances of complex queue discipline configurations - Add inet drop monitor support - A few GRO performance improvements - Add infrastructure for atomic dev stats, addressing long standing data races - De-duplicate common code between OVS and conntrack offloading infrastructure - A bunch of UBSAN_BOUNDS/FORTIFY_SOURCE improvements - Netfilter: introduce packet parser for tunneled packets - Replace IPVS timer-based estimators with kthreads to scale up the workload with the number of available CPUs - Add the helper support for connection-tracking OVS offload BPF: - Support for user defined BPF objects: the use case is to allocate own objects, build own object hierarchies and use the building blocks to build own data structures flexibly, for example, linked lists in BPF - Make cgroup local storage available to non-cgroup attached BPF programs - Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers - A relevant bunch of BPF verifier fixes and improvements - Veristat tool improvements to support custom filtering, sorting, and replay of results - Add LLVM disassembler as default library for dumping JITed code - Lots of new BPF documentation for various BPF maps - Add bpf_rcu_read_{,un}lock() support for sleepable programs - Add RCU grace period chaining to BPF to wait for the completion of access from both sleepable and non-sleepable BPF programs - Add support storing struct task_struct objects as kptrs in maps - Improve helper UAPI by explicitly defining BPF_FUNC_xxx integer values - Add libbpf *_opts API-variants for bpf_*_get_fd_by_id() functions Protocols: - TCP: implement Protective Load Balancing across switch links - TCP: allow dynamically disabling TCP-MD5 static key, reverting back to fast[er]-path - UDP: Introduce optional per-netns hash lookup table - IPv6: simplify and cleanup sockets disposal - Netlink: support different type policies for each generic netlink operation - MPTCP: add MSG_FASTOPEN and FastOpen listener side support - MPTCP: add netlink notification support for listener sockets events - SCTP: add VRF support, allowing sctp sockets binding to VRF devices - Add bridging MAC Authentication Bypass (MAB) support - Extensions for Ethernet VPN bridging implementation to better support multicast scenarios - More work for Wi-Fi 7 support, comprising conversion of all the existing drivers to internal TX queue usage - IPSec: introduce a new offload type (packet offload) allowing complete header processing and crypto offloading - IPSec: extended ack support for more descriptive XFRM error reporting - RXRPC: increase SACK table size and move processing into a per-local endpoint kernel thread, reducing considerably the required locking - IEEE 802154: synchronous send frame and extended filtering support, initial support for scanning available 15.4 networks - Tun: bump the link speed from 10Mbps to 10Gbps - Tun/VirtioNet: implement UDP segmentation offload support Driver API: - PHY/SFP: improve power level switching between standard level 1 and the higher power levels - New API for netdev <-> devlink_port linkage - PTP: convert existing drivers to new frequency adjustment implementation - DSA: add support for rx offloading - Autoload DSA tagging driver when dynamically changing protocol - Add new PCP and APPTRUST attributes to Data Center Bridging - Add configuration support for 800Gbps link speed - Add devlink port function attribute to enable/disable RoCE and migratable - Extend devlink-rate to support strict prioriry and weighted fair queuing - Add devlink support to directly reading from region memory - New device tree helper to fetch MAC address from nvmem - New big TCP helper to simplify temporary header stripping New hardware / drivers: - Ethernet: - Marvel Octeon CNF95N and CN10KB Ethernet Switches - Marvel Prestera AC5X Ethernet Switch - WangXun 10 Gigabit NIC - Motorcomm yt8521 Gigabit Ethernet - Microchip ksz9563 Gigabit Ethernet Switch - Microsoft Azure Network Adapter - Linux Automation 10Base-T1L adapter - PHY: - Aquantia AQR112 and AQR412 - Motorcomm YT8531S - PTP: - Orolia ART-CARD - WiFi: - MediaTek Wi-Fi 7 (802.11be) devices - RealTek rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du USB devices - Bluetooth: - Broadcom BCM4377/4378/4387 Bluetooth chipsets - Realtek RTL8852BE and RTL8723DS - Cypress.CYW4373A0 WiFi + Bluetooth combo device Drivers: - CAN: - gs_usb: bus error reporting support - kvaser_usb: listen only and bus error reporting support - Ethernet NICs: - Intel (100G): - extend action skbedit to RX queue mapping - implement devlink-rate support - support direct read from memory - nVidia/Mellanox (mlx5): - SW steering improvements, increasing rules update rate - Support for enhanced events compression - extend H/W offload packet manipulation capabilities - implement IPSec packet offload mode - nVidia/Mellanox (mlx4): - better big TCP support - Netronome Ethernet NICs (nfp): - IPsec offload support - add support for multicast filter - Broadcom: - RSS and PTP support improvements - AMD/SolarFlare: - netlink extened ack improvements - add basic flower matches to offload, and related stats - Virtual NICs: - ibmvnic: introduce affinity hint support - small / embedded: - FreeScale fec: add initial XDP support - Marvel mv643xx_eth: support MII/GMII/RGMII modes for Kirkwood - TI am65-cpsw: add suspend/resume support - Mediatek MT7986: add RX wireless wthernet dispatch support - Realtek 8169: enable GRO software interrupt coalescing per default - Ethernet high-speed switches: - Microchip (sparx5): - add support for Sparx5 TC/flower H/W offload via VCAP - Mellanox mlxsw: - add 802.1X and MAC Authentication Bypass offload support - add ip6gre support - Embedded Ethernet switches: - Mediatek (mtk_eth_soc): - improve PCS implementation, add DSA untag support - enable flow offload support - Renesas: - add rswitch R-Car Gen4 gPTP support - Microchip (lan966x): - add full XDP support - add TC H/W offload via VCAP - enable PTP on bridge interfaces - Microchip (ksz8): - add MTU support for KSZ8 series - Qualcomm 802.11ax WiFi (ath11k): - support configuring channel dwell time during scan - MediaTek WiFi (mt76): - enable Wireless Ethernet Dispatch (WED) offload support - add ack signal support - enable coredump support - remain_on_channel support - Intel WiFi (iwlwifi): - enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities - 320 MHz channels support - RealTek WiFi (rtw89): - new dynamic header firmware format support - wake-over-WLAN support" * tag 'net-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2002 commits) ipvs: fix type warning in do_div() on 32 bit net: lan966x: Remove a useless test in lan966x_ptp_add_trap() net: ipa: add IPA v4.7 support dt-bindings: net: qcom,ipa: Add SM6350 compatible bnxt: Use generic HBH removal helper in tx path IPv6/GRO: generic helper to remove temporary HBH/jumbo header in driver selftests: forwarding: Add bridge MDB test selftests: forwarding: Rename bridge_mdb test bridge: mcast: Support replacement of MDB port group entries bridge: mcast: Allow user space to specify MDB entry routing protocol bridge: mcast: Allow user space to add (*, G) with a source list and filter mode bridge: mcast: Add support for (*, G) with a source list and filter mode bridge: mcast: Avoid arming group timer when (S, G) corresponds to a source bridge: mcast: Add a flag for user installed source entries bridge: mcast: Expose __br_multicast_del_group_src() bridge: mcast: Expose br_multicast_new_group_src() bridge: mcast: Add a centralized error path bridge: mcast: Place netlink policy before validation functions bridge: mcast: Split (*, G) and (S, G) addition into different functions bridge: mcast: Do not derive entry type from its filter mode ...

ibmvnic: Add hotpluggable CPU callbacks to reassign affinity hints

2022-11-14T10:47:07Z

When CPU's are added and removed, ibmvnic devices will reassign hint values. Introduce a new cpu hotplug state CPUHP_IBMVNIC_DEAD to signal to ibmvnic devices that the CPU has been removed and it is time to reset affinity hint assignments. On the other hand, when CPU's are being added, add a state instance to CPUHP_AP_ONLINE_DYN which will trigger a reassignment of affinity hints once the new CPU's are online. This implementation is based on the virtio_net driver. Signed-off-by: Thomas Falcon Signed-off-by: Dany Madden Signed-off-by: Nick Child Reviewed-by: Rick Lindsley Reviewed-by: Haren Myneni Signed-off-by: David S. Miller