user/sven/linux.git/include/linux/cpuidle.h, branch v3.18.22

cpuidle: remove state_count field from struct cpuidle_device

2015-04-24T21:13:56Z

[ Upstream commit d75e4af14e228bbe3f86e29bcecb8e6be98d4e04 ] Thomas Schlichter reports the following issue on his Samsung NC20: "The C-states C1 and C2 to the OS when connected to AC, and additionally provides the C3 C-state when disconnected from AC. However, the number of C-states shown in sysfs is fixed to the number of C-states present at boot. If I boot with AC connected, I always only see the C-states up to C2 even if I disconnect AC. The reason is commit 130a5f692425 (ACPI / cpuidle: remove dev->state_count setting). It removes the update of dev->state_count, but sysfs uses exactly this variable to show the C-states. The fix is to use drv->state_count in sysfs. As this is currently the last user of dev->state_count, this variable can be completely removed." Remove dev->state_count as per the above. Reported-by: Thomas Schlichter Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kyungmin Park Acked-by: Daniel Lezcano Cc: 3.14+ # 3.14+ [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2014-06-10T01:10:34Z

Pull MIPS updates from Ralf Baechle: - three fixes for 3.15 that didn't make it in time - limited Octeon 3 support. - paravirtualization support - improvment to platform support for Netlogix SOCs. - add support for powering down the Malta eval board in software - add many instructions to the in-kernel microassembler. - add support for the BPF JIT. - minor cleanups of the BCM47xx code. - large cleanup of math emu code resulting in significant code size reduction, better readability of the code and more accurate emulation. - improvments to the MIPS CPS code. - support C3 power status for the R4k count/compare clock device. - improvments to the GIO support for older SGI workstations. - increase number of supported CPUs to 256; this can be reached on certain embedded multithreaded ccNUMA configurations. - various small cleanups, updates and fixes * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits) MIPS: IP22/IP28: Improve GIO support MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX DEC: Document the R4k MB ASIC mini interrupt controller DEC: Add self as the maintainer MIPS: Add microMIPS MSA support. MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents. MIPS: Replace obsolete strict_strto call with kstrto MIPS: BFP: Simplify code slightly. MIPS: Call find_vma with the mmap_sem held MIPS: Fix 'write_msa_##' inline macro. MIPS: Fix MSA toolchain support detection. mips: Update the email address of Geert Uytterhoeven MIPS: Add minimal defconfig for mips_paravirt MIPS: Enable build for new system 'paravirt' MIPS: paravirt: Add pci controller for virtio MIPS: Add code for new system 'paravirt' MIPS: Add functions for hypervisor call MIPS: OCTEON: Add OCTEON3 to __get_cpu_type MIPS: Add function get_ebase_cpunum MIPS: Add minimal support for OCTEON3 to c-r4k.c ...

cpuidle: declare cpuidle_dev in cpuidle.h

2014-05-28T15:20:35Z

Declaring this allows drivers which need to initialise each struct cpuidle_device at initialisation time to make use of the structures already defined in cpuidle.c, rather than having to wastefully define their own. Signed-off-by: Paul Burton

PM / suspend: Always use deepest C-state in the "freeze" sleep state

2014-05-06T23:49:28Z

If freeze_enter() is called, we want to bypass the current cpuidle governor and always use the deepest available (that is, not disabled) C-state, because we want to save as much energy as reasonably possible then and runtime latency constraints don't matter at that point, since the system is in a sleep state anyway. Signed-off-by: Rafael J. Wysocki Tested-by: Aubrey Li

cpuidle: Combine cpuidle_enabled() with cpuidle_select()

2014-04-30T22:13:47Z

Since both cpuidle_enabled() and cpuidle_select() are only called by cpuidle_idle_call(), it is not really useful to keep them separate and combining them will help to avoid complicating cpuidle_idle_call() even further if governors are changed to return error codes sometimes. This code modification shouldn't lead to any functional changes. Signed-off-by: Rafael J. Wysocki

sched/idle: Reorganize the idle loop

2014-03-11T10:52:47Z

Now that we have the main cpuidle function in idle.c, move some code from the idle mainloop to this function for the sake of clarity. That removes if then else indentation difficult to follow when looking at the code. This patch does not change the current behavior. Signed-off-by: Daniel Lezcano Acked-by: Nicolas Pitre Signed-off-by: Peter Zijlstra Cc: tglx@linutronix.de Cc: rjw@rjwysocki.net Cc: preeti@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1393832934-11625-3-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar

cpuidle/idle: Move the cpuidle_idle_call function to idle.c

2014-03-11T10:52:45Z

The cpuidle_idle_call does nothing more than calling the three individuals function and is no longer used by any arch specific code but only in the cpuidle framework code. We can move this function into the idle task code to ensure better proximity to the scheduler code. Signed-off-by: Daniel Lezcano Acked-by: Nicolas Pitre Signed-off-by: Peter Zijlstra Cc: rjw@rjwysocki.net Cc: preeti@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1393832934-11625-2-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar

idle/cpuidle: Split cpuidle_idle_call main function into smaller functions

2014-03-11T10:52:45Z

In order to allow better integration between the cpuidle framework and the scheduler, reducing the distance between these two sub-components will facilitate this integration by moving part of the cpuidle code in the idle task file and, because idle.c is in the sched directory, we have access to the scheduler's private structures. This patch splits the cpuidle_idle_call main entry function into 3 calls to a newly added API: 1. select the idle state 2. enter the idle state 3. reflect the idle state The cpuidle_idle_call calls these three functions to implement the main idle entry function. Signed-off-by: Daniel Lezcano Acked-by: Nicolas Pitre Signed-off-by: Peter Zijlstra Cc: rjw@rjwysocki.net Cc: preeti@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1393832934-11625-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Ingo Molnar

cpuidle: remove cpuidle_unregister_governor()

2013-10-30T00:21:24Z

cpuidle_unregister_governor() and cpuidle_replace_governor() aren't used anymore and can be removed. They were used by cpufreq governors earlier, but since the governors can't be compiled as modules any more, these two functions aren't necessary. Suggested-by: Daniel Lezcano Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

cpuidle: fix indentation of cpumask

2013-10-30T00:21:21Z

Use tabs for cpumask indentation in struct cpuidle_driver. [rjw: Changelog] Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki