user/sven/linux.git/include/linux/cpuidle.h, branch v4.9.329

cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64}

2016-07-21T21:29:38Z

The function arm_enter_idle_state is exactly the same in both generic ARM{32,64} CPUIdle driver and will be the same even on ARM64 backend for ACPI processor idle driver. So we can unify it and move it to a common place by introducing CPU_PM_CPU_IDLE_ENTER macro that can be used in all places avoiding duplication. This is in preparation of reuse of the generic cpuidle entry function for ACPI LPI support on ARM64. Suggested-by: Rafael J. Wysocki Signed-off-by: Sudeep Holla Signed-off-by: Rafael J. Wysocki

cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE

2016-06-02T21:05:27Z

The cpuidle_devices per-CPU variable is only defined when CPU_IDLE is enabled. Commit c8cc7d4de7a4 ("sched/idle: Reorganize the idle loop") removed the #ifdef CONFIG_CPU_IDLE around cpuidle_idle_call() with the compiler optimising away __this_cpu_read(cpuidle_devices). However, with CONFIG_UBSAN && !CONFIG_CPU_IDLE, this optimisation no longer happens and the kernel fails to link since cpuidle_devices is not defined. This patch introduces an accessor function for the current CPU cpuidle device (returning NULL when !CONFIG_CPU_IDLE) and uses it in cpuidle_idle_call(). Signed-off-by: Catalin Marinas Cc: 4.5+ # 4.5+ Signed-off-by: Rafael J. Wysocki

cpuidle/coupled: Remove cpuidle_device::safe_state_index

2015-08-28T13:14:54Z

cpuidle_device::safe_state_index need to be initialized before use, it should be the same as cpuidle_driver::safe_state_index. We tackled this issue by removing the safe_state_index from the cpuidle_device structure and use the one in the cpuidle_driver structure instead. Suggested-by: Daniel Lezcano Signed-off-by: Xunlei Pang Signed-off-by: Rafael J. Wysocki

Merge branches 'pm-sleep' and 'pm-runtime'

2015-06-18T23:18:02Z

* pm-sleep: PM / sleep: trace_device_pm_callback coverage in dpm_prepare/complete PM / wakeup: add a dummy wakeup_source to record statistics PM / sleep: Make suspend-to-idle-specific code depend on CONFIG_SUSPEND PM / sleep: Return -EBUSY from suspend_enter() on wakeup detection PM / tick: Add tracepoints for suspend-to-idle diagnostics PM / sleep: Fix symbol name in a comment in kernel/power/main.c leds / PM: fix hibernation on arm when gpio-led used with CPU led trigger ARM: omap-device: use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS bus: omap_l3_noc: add missed callbacks for suspend-to-disk PM / sleep: Add macro to define common noirq system PM callbacks PM / sleep: Refine diagnostic messages in enter_state() PM / wakeup: validate wakeup source before activating it. * pm-runtime: PM / Runtime: Update last_busy in rpm_resume PM / runtime: add note about re-calling in during device probe()

PM / sleep: Make suspend-to-idle-specific code depend on CONFIG_SUSPEND

2015-05-19T00:44:24Z

Since idle_should_freeze() is defined to always return 'false' for CONFIG_SUSPEND unset, all of the code depending on it in cpuidle_idle_call() is not necessary in that case. Make that code depend on CONFIG_SUSPEND too to avoid building it when it is not going to be used. Signed-off-by: Rafael J. Wysocki Acked-by: Thomas Gleixner

sched / idle: Call default_idle_call() from cpuidle_enter_state()

2015-05-14T19:37:47Z

The check of the cpuidle_enter() return value against -EBUSY made in call_cpuidle() will not be necessary any more if cpuidle_enter_state() calls default_idle_call() directly when it is about to return -EBUSY, so make that happen and eliminate the check. Signed-off-by: Rafael J. Wysocki Reviewed-by: Preeti U Murthy Tested-by: Preeti U Murthy Tested-by: Sudeep Holla Acked-by: Kevin Hilman

sched / idle: Call idle_set_state() from cpuidle_enter_state()

2015-05-14T19:35:10Z

Introduce a wrapper function around idle_set_state() called sched_idle_set_state() that will pass this_rq() to it as the first argument and make cpuidle_enter_state() call the new function before and after entering the target state. At the same time, remove direct invocations of idle_set_state() from call_cpuidle(). This will allow the invocation of default_idle_call() to be moved from call_cpuidle() to cpuidle_enter_state() safely and call_cpuidle() to be simplified a bit as a result. Signed-off-by: Rafael J. Wysocki Reviewed-by: Preeti U Murthy Tested-by: Preeti U Murthy Tested-by: Sudeep Holla Acked-by: Kevin Hilman

cpuidle: remove state_count field from struct cpuidle_device

2015-04-03T11:15:50Z

Thomas Schlichter reports the following issue on his Samsung NC20: "The C-states C1 and C2 to the OS when connected to AC, and additionally provides the C3 C-state when disconnected from AC. However, the number of C-states shown in sysfs is fixed to the number of C-states present at boot. If I boot with AC connected, I always only see the C-states up to C2 even if I disconnect AC. The reason is commit 130a5f692425 (ACPI / cpuidle: remove dev->state_count setting). It removes the update of dev->state_count, but sysfs uses exactly this variable to show the C-states. The fix is to use drv->state_count in sysfs. As this is currently the last user of dev->state_count, this variable can be completely removed." Remove dev->state_count as per the above. Reported-by: Thomas Schlichter Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Kyungmin Park Acked-by: Daniel Lezcano Cc: 3.14+ # 3.14+ [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki

cpuidle / sleep: Use broadcast timer for states that stop local timer

2015-03-05T22:13:19Z

Commit 381063133246 (PM / sleep: Re-implement suspend-to-idle handling) overlooked the fact that entering some sufficiently deep idle states by CPUs may cause their local timers to stop and in those cases it is necessary to switch over to a broadcast timer prior to entering the idle state. If the cpuidle driver in use does not provide the new ->enter_freeze callback for any of the idle states, that problem affects suspend-to-idle too, but it is not taken into account after the changes made by commit 381063133246. Fix that by changing the definition of cpuidle_enter_freeze() and re-arranging of the code in cpuidle_idle_call(), so the former does not call cpuidle_enter() any more and the fallback case is handled by cpuidle_idle_call() directly. Fixes: 381063133246 (PM / sleep: Re-implement suspend-to-idle handling) Reported-and-tested-by: Lorenzo Pieralisi Signed-off-by: Rafael J. Wysocki Acked-by: Peter Zijlstra (Intel)

PM / sleep: Make it possible to quiesce timers during suspend-to-idle

2015-02-15T18:40:09Z

The efficiency of suspend-to-idle depends on being able to keep CPUs in the deepest available idle states for as much time as possible. Ideally, they should only be brought out of idle by system wakeup interrupts. However, timer interrupts occurring periodically prevent that from happening and it is not practical to chase all of the "misbehaving" timers in a whack-a-mole fashion. A much more effective approach is to suspend the local ticks for all CPUs and the entire timekeeping along the lines of what is done during full suspend, which also helps to keep suspend-to-idle and full suspend reasonably similar. The idea is to suspend the local tick on each CPU executing cpuidle_enter_freeze() and to make the last of them suspend the entire timekeeping. That should prevent timer interrupts from triggering until an IO interrupt wakes up one of the CPUs. It needs to be done with interrupts disabled on all of the CPUs, though, because otherwise the suspended clocksource might be accessed by an interrupt handler which might lead to fatal consequences. Unfortunately, the existing ->enter callbacks provided by cpuidle drivers generally cannot be used for implementing that, because some of them re-enable interrupts temporarily and some idle entry methods cause interrupts to be re-enabled automatically on exit. Also some of these callbacks manipulate local clock event devices of the CPUs which really shouldn't be done after suspending their ticks. To overcome that difficulty, introduce a new cpuidle state callback, ->enter_freeze, that will be guaranteed (1) to keep interrupts disabled all the time (and return with interrupts disabled) and (2) not to touch the CPU timer devices. Modify cpuidle_enter_freeze() to look for the deepest available idle state with ->enter_freeze present and to make the CPU execute that callback with suspended tick (and the last of the online CPUs to execute it with suspended timekeeping). Suggested-by: Thomas Gleixner Signed-off-by: Rafael J. Wysocki Acked-by: Peter Zijlstra (Intel)