user/sven/linux.git/include/linux/device-mapper.h, branch v4.9.287

block: Move SECTOR_SIZE and SECTOR_SHIFT definitions into

2020-09-12T09:47:36Z

commit 233bde21aa43516baa013ef7ac33f3427056db3e upstream. It happens often while I'm preparing a patch for a block driver that I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT available for this driver? Do I have to introduce definitions of these constants before I can use these constants? To avoid this confusion, move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the header file such that these become available for all block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h header file conditional to avoid that including that header file after causes the compiler to complain about a SECTOR_SIZE redefinition. Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have not been removed from uapi header files nor from NAND drivers in which these constants are used for another purpose than converting block layer offsets and sizes into a number of sectors. Cc: David S. Miller Cc: Mike Snitzer Cc: Dan Williams Cc: Minchan Kim Cc: Nitin Gupta Reviewed-by: Sergey Senozhatsky Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Reviewed-by: Martin K. Petersen Signed-off-by: Bart Van Assche Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

dm: fix to_sector() for 32bit

2019-03-23T12:19:52Z

commit 0bdb50c531f7377a9da80d3ce2d61f389c84cb30 upstream. A dm-raid array with devices larger than 4GB won't assemble on a 32 bit host since _check_data_dev_sectors() was added in 4.16. This is because to_sector() treats its argument as an "unsigned long" which is 32bits (4GB) on a 32bit host. Using "unsigned long long" is more correct. Kernels as early as 4.2 can have other problems due to to_sector() being used on the size of a device. Fixes: 0cf4503174c1 ("dm raid: add support for the MD RAID0 personality") cc: stable@vger.kernel.org (v4.2+) Reported-and-tested-by: Guillaume Perréal Signed-off-by: NeilBrown Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm rq: add DM_MAPIO_DELAY_REQUEUE to delay requeue of blk-mq requests

2016-09-14T17:56:38Z

Otherwise blk-mq will immediately dispatch requests that are requeued via a BLK_MQ_RQ_QUEUE_BUSY return from blk_mq_ops .queue_rq. Delayed requeue is implemented using blk_mq_delay_kick_requeue_list() with a delay of 5 secs. In the context of DM multipath (all paths down) it doesn't make any sense to requeue more quickly. Signed-off-by: Mike Snitzer

Merge tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2016-07-29T00:38:16Z

Pull libnvdimm updates from Dan Williams: - Replace pcommit with ADR / directed-flushing. The pcommit instruction, which has not shipped on any product, is deprecated. Instead, the requirement is that platforms implement either ADR, or provide one or more flush addresses per nvdimm. ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers to the memory controller on a power-fail event. Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure: "Flush Hint Address Structure". A flush hint is an mmio address that when written and fenced assures that all previous posted writes targeting a given dimm have been flushed to media. - On-demand ARS (address range scrub). Linux uses the results of the ACPI ARS commands to track bad blocks in pmem devices. When latent errors are detected we re-scrub the media to refresh the bad block list, userspace can also request a re-scrub at any time. - Support for the Microsoft DSM (device specific method) command format. - Support for EDK2/OVMF virtual disk device memory ranges. - Various fixes and cleanups across the subsystem. * tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits) libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register" nfit: do an ARS scrub on hitting a latent media error nfit: move to nfit/ sub-directory nfit, libnvdimm: allow an ARS scrub to be triggered on demand libnvdimm: register nvdimm_bus devices with an nd_bus driver pmem: clarify a debug print in pmem_clear_poison x86/insn: remove pcommit Revert "KVM: x86: add pcommit support" nfit, tools/testing/nvdimm/: unify shutdown paths libnvdimm: move ->module to struct nvdimm_bus_descriptor nfit: cleanup acpi_nfit_init calling convention nfit: fix _FIT evaluation memory leak + use after free tools/testing/nvdimm: add manufacturing_{date|location} dimm properties tools/testing/nvdimm: add virtual ramdisk range acpi, nfit: treat virtual ramdisk SPA as pmem region pmem: kill __pmem address space pmem: kill wmb_pmem() libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes fs/dax: remove wmb_pmem() libnvdimm, pmem: flush posted-write queues on shutdown ...

dm: add infrastructure for DAX support

2016-07-21T03:49:49Z

Change mapped device to implement direct_access function, dm_blk_direct_access(), which calls a target direct_access function. 'struct target_type' is extended to have target direct_access interface. This function limits direct accessible size to the dm_target's limit with max_io_len(). Add dm_table_supports_dax() to iterate all targets and associated block devices to check for DAX support. To add DAX support to a DM target the target must only implement the direct_access function. Add a new dm type, DM_TYPE_DAX_BIO_BASED, which indicates that mapped device supports DAX and is bio based. This new type is used to assure that all target devices have DAX support and remain that way after QUEUE_FLAG_DAX is set in mapped device. At initial table load, QUEUE_FLAG_DAX is set to mapped device when setting DM_TYPE_DAX_BIO_BASED to the type. Any subsequent table load to the mapped device must have the same type, or else it fails per the check in table_load(). Signed-off-by: Toshi Kani Signed-off-by: Mike Snitzer

dm mpath: add optional "queue_mode" feature

2016-06-10T19:16:02Z

Allow a user to specify an optional feature 'queue_mode ' where may be "bio", "rq" or "mq" -- which corresponds to bio-based, request_fn rq-based, and blk-mq rq-based respectively. If the queue_mode feature isn't specified the default for the "multipath" target is still "rq" but if dm_mod.use_blk_mq is set to Y it'll default to mode "mq". This new queue_mode feature introduces the ability for each multipath device to have its own queue_mode (whereas before this feature all multipath devices effectively had to have the same queue_mode). This commit also goes a long way to eliminate the awkward (ab)use of DM_TYPE_*, the associated filter_md_type() and other relatively fragile and difficult to maintain code. Signed-off-by: Mike Snitzer

dm snapshot: disallow the COW and origin devices from being identical

2016-03-10T22:12:09Z

Otherwise loading a "snapshot" table using the same device for the origin and COW devices, e.g.: echo "0 20971520 snapshot 253:3 253:3 P 8" | dmsetup create snap will trigger: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 1958.979934] IP: [] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1958.989655] PGD 0 [ 1958.991903] Oops: 0000 [#1] SMP ... [ 1959.059647] CPU: 9 PID: 3556 Comm: dmsetup Tainted: G IO 4.5.0-rc5.snitm+ #150 ... [ 1959.083517] task: ffff8800b9660c80 ti: ffff88032a954000 task.ti: ffff88032a954000 [ 1959.091865] RIP: 0010:[] [] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.104295] RSP: 0018:ffff88032a957b30 EFLAGS: 00010246 [ 1959.110219] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 1959.118180] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff880329334a00 [ 1959.126141] RBP: ffff88032a957b50 R08: 0000000000000000 R09: 0000000000000001 [ 1959.134102] R10: 000000000000000a R11: f000000000000000 R12: ffff880330884d80 [ 1959.142061] R13: 0000000000000008 R14: ffffc90001c13088 R15: ffff880330884d80 [ 1959.150021] FS: 00007f8926ba3840(0000) GS:ffff880333440000(0000) knlGS:0000000000000000 [ 1959.159047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1959.165456] CR2: 0000000000000098 CR3: 000000032f48b000 CR4: 00000000000006e0 [ 1959.173415] Stack: [ 1959.175656] ffffc90001c13040 ffff880329334a00 ffff880330884ed0 ffff88032a957bdc [ 1959.183946] ffff88032a957bb8 ffffffffa040f225 ffff880329334a30 ffff880300000000 [ 1959.192233] ffffffffa04133e0 ffff880329334b30 0000000830884d58 00000000569c58cf [ 1959.200521] Call Trace: [ 1959.203248] [] dm_exception_store_create+0x1d5/0x240 [dm_snapshot] [ 1959.211986] [] snapshot_ctr+0x140/0x630 [dm_snapshot] [ 1959.219469] [] ? dm_split_args+0x64/0x150 [dm_mod] [ 1959.226656] [] dm_table_add_target+0x177/0x440 [dm_mod] [ 1959.234328] [] table_load+0x143/0x370 [dm_mod] [ 1959.241129] [] ? retrieve_status+0x1b0/0x1b0 [dm_mod] [ 1959.248607] [] ctl_ioctl+0x255/0x4d0 [dm_mod] [ 1959.255307] [] ? memzero_explicit+0x12/0x20 [ 1959.261816] [] dm_ctl_ioctl+0x13/0x20 [dm_mod] [ 1959.268615] [] do_vfs_ioctl+0xa6/0x5c0 [ 1959.274637] [] ? __audit_syscall_entry+0xaf/0x100 [ 1959.281726] [] ? do_audit_syscall_entry+0x66/0x70 [ 1959.288814] [] SyS_ioctl+0x79/0x90 [ 1959.294450] [] entry_SYSCALL_64_fastpath+0x12/0x71 ... [ 1959.323277] RIP [] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.333090] RSP [ 1959.336978] CR2: 0000000000000098 [ 1959.344121] ---[ end trace b049991ccad1169e ]--- Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1195899 Cc: stable@vger.kernel.org Signed-off-by: Ding Xiang Signed-off-by: Mike Snitzer

dm: rename target's per_bio_data_size to per_io_data_size

2016-02-23T03:34:37Z

Request-based DM will also make use of per_bio_data_size. Signed-off-by: Mike Snitzer

dm: set DM_TARGET_WILDCARD feature on "error" target

2016-02-22T16:06:21Z

The DM_TARGET_WILDCARD feature indicates that the "error" target may replace any target; even immutable targets. This feature will be useful to preserve the ability to replace the "multipath" target even once it is formally converted over to having the DM_TARGET_IMMUTABLE feature. Also, implicit in the DM_TARGET_WILDCARD feature flag being set is that .map, .map_rq, .clone_and_map_rq and .release_clone_rq are all defined in the target_type. Signed-off-by: Mike Snitzer

dm: refactor ioctl handling

2015-10-31T23:05:59Z

This moves the call to blkdev_ioctl and the argument checking to DM core code, and only leaves a callout to find the block device to operate on in the targets. This simplifies the code and allows us to pass through ioctl-like command using other methods in the next patch. Also split out a helper around calling the prepare_ioctl method that will be reused for persistent reservation handling. Signed-off-by: Christoph Hellwig Signed-off-by: Mike Snitzer