user/sven/linux.git/include/linux/device-mapper.h, branch v5.14.1

dm: introduce zone append emulation

2021-06-04T16:07:37Z

For zoned targets that cannot support zone append operations, implement an emulation using regular write operations. If the original BIO submitted by the user is a zone append operation, change its clone into a regular write operation directed at the target zone write pointer position. To do so, an array of write pointer offsets (write pointer position relative to the start of a zone) is added to struct mapped_device. All operations that modify a sequential zone write pointer (writes, zone reset, zone finish and zone append) are intersepted in __map_bio() and processed using the new functions dm_zone_map_bio(). Detection of the target ability to natively support zone append operations is done from dm_table_set_restrictions() by calling the function dm_set_zones_restrictions(). A target that does not support zone append operation, either by explicitly declaring it using the new struct dm_target field zone_append_not_supported, or because the device table contains a non-zoned device, has its mapped device marked with the new flag DMF_ZONE_APPEND_EMULATED. The helper function dm_emulate_zone_append() is introduced to test a mapped device for this new flag. Atomicity of the zones write pointer tracking and updates is done using a zone write locking mechanism based on a bitmap. This is similar to the block layer method but based on BIOs rather than struct request. A zone write lock is taken in dm_zone_map_bio() for any clone BIO with an operation type that changes the BIO target zone write pointer position. The zone write lock is released if the clone BIO is failed before submission or when dm_zone_endio() is called when the clone BIO completes. The zone write lock bitmap of the mapped device, together with a bitmap indicating zone types (conv_zones_bitmap) and the write pointer offset array (zwp_offset) are allocated and initialized with a full device zone report in dm_set_zones_restrictions() using the function dm_revalidate_zones(). For failed operations that may have modified a zone write pointer, the zone write pointer offset is marked as invalid in dm_zone_endio(). Zones with an invalid write pointer offset are checked and the write pointer updated using an internal report zone operation when the faulty zone is accessed again by the user. All functions added for this emulation have a minimal overhead for zoned targets natively supporting zone append operations. Regular device targets are also not affected. The added code also does not impact builds with CONFIG_BLK_DEV_ZONED disabled by stubbing out all dm zone related functions. Signed-off-by: Damien Le Moal Reviewed-by: Himanshu Madhani Reviewed-by: Hannes Reinecke Signed-off-by: Mike Snitzer

dm: Introduce dm_report_zones()

2021-06-04T16:07:32Z

To simplify the implementation of the report_zones operation of a zoned target, introduce the function dm_report_zones() to set a target mapping start sector in struct dm_report_zones_args and call blkdev_report_zones(). This new function is exported and the report zones callback function dm_report_zones_cb() is not. dm-linear, dm-flakey and dm-crypt are modified to use dm_report_zones(). Signed-off-by: Damien Le Moal Reviewed-by: Johannes Thumshirn Reviewed-by: Hannes Reinecke Reviewed-by: Himanshu Madhani Signed-off-by: Mike Snitzer

dm: replace dm_vcalloc()

2021-04-19T17:13:26Z

Use kvcalloc or kvmalloc_array instead (depending whether zeroing is useful). Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Mike Snitzer

dm table: Fix zoned model check and zone sectors check

2021-03-22T16:32:31Z

Commit 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks") triggered dm table load failure when dm-zoned device is set up for zoned block devices and a regular device for cache. The commit inverted logic of two callback functions for iterate_devices: device_is_zoned_model() and device_matches_zone_sectors(). The logic of device_is_zoned_model() was inverted then all destination devices of all targets in dm table are required to have the expected zoned model. This is fine for dm-linear, dm-flakey and dm-crypt on zoned block devices since each target has only one destination device. However, this results in failure for dm-zoned with regular cache device since that target has both regular block device and zoned block devices. As for device_matches_zone_sectors(), the commit inverted the logic to require all zoned block devices in each target have the specified zone_sectors. This check also fails for regular block device which does not have zones. To avoid the check failures, fix the zone model check and the zone sectors check. For zone model check, introduce the new feature flag DM_TARGET_MIXED_ZONED_MODEL, and set it to dm-zoned target. When the target has this flag, allow it to have destination devices with any zoned model. For zone sectors check, skip the check if the destination device is not a zoned block device. Also add comments and improve an error message to clarify expectations to the two checks. Fixes: 24f6b6036c9e ("dm table: fix zoned iterate_devices based device capability checks") Signed-off-by: Shin'ichiro Kawasaki Signed-off-by: Damien Le Moal Signed-off-by: Mike Snitzer

dm: fix deadlock when swapping to encrypted device

2021-02-11T14:45:28Z

The system would deadlock when swapping to a dm-crypt device. The reason is that for each incoming write bio, dm-crypt allocates memory that holds encrypted data. These excessive allocations exhaust all the memory and the result is either deadlock or OOM trigger. This patch limits the number of in-flight swap bios, so that the memory consumed by dm-crypt is limited. The limit is enforced if the target set the "limit_swap_bios" variable and if the bio has REQ_SWAP set. Non-swap bios are not affected becuase taking the semaphore would cause performance degradation. This is similar to request-based drivers - they will also block when the number of requests is over the limit. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer

dm: simplify target code conditional on CONFIG_BLK_DEV_ZONED

2021-02-11T14:45:27Z

Allow removal of CONFIG_BLK_DEV_ZONED conditionals in target_type definition of various targets. Suggested-by: Eric Biggers Signed-off-by: Mike Snitzer

dm: add support for passing through inline crypto support

2021-02-11T14:45:25Z

Update the device-mapper core to support exposing the inline crypto support of the underlying device(s) through the device-mapper device. This works by creating a "passthrough keyslot manager" for the dm device, which declares support for encryption settings which all underlying devices support. When a supported setting is used, the bio cloning code handles cloning the crypto context to the bios for all the underlying devices. When an unsupported setting is used, the blk-crypto fallback is used as usual. Crypto support on each underlying device is ignored unless the corresponding dm target opts into exposing it. This is needed because for inline crypto to semantically operate on the original bio, the data must not be transformed by the dm target. Thus, targets like dm-linear can expose crypto support of the underlying device, but targets like dm-crypt can't. (dm-crypt could use inline crypto itself, though.) A DM device's table can only be changed if the "new" inline encryption capabilities are a (*not* necessarily strict) superset of the "old" inline encryption capabilities. Attempts to make changes to the table that result in some inline encryption capability becoming no longer supported will be rejected. For the sake of clarity, key eviction from underlying devices will be handled in a future patch. Co-developed-by: Eric Biggers Signed-off-by: Eric Biggers Signed-off-by: Satya Tangirala Signed-off-by: Mike Snitzer

dm: remove special-casing of bio-based immutable singleton target on NVMe

2020-10-07T22:08:41Z

Since commit 5a6c35f9af416 ("block: remove direct_make_request") there is no benefit to DM special-casing NVMe. Remove all code used to establish DM_TYPE_NVME_BIO_BASED. Signed-off-by: Mike Snitzer

dm: add support for REQ_NOWAIT and enable it for linear target

2020-09-25T14:20:03Z

Add DM target feature flag DM_TARGET_NOWAIT which advertises that target works with REQ_NOWAIT bios. Add dm_table_supports_nowait() and update dm_table_set_restrictions() to set/clear QUEUE_FLAG_NOWAIT accordingly. Signed-off-by: Konstantin Khlebnikov Signed-off-by: Mike Snitzer Signed-off-by: Jens Axboe

Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block

2020-08-03T18:57:03Z

Pull core block updates from Jens Axboe: "Good amount of cleanups and tech debt removals in here, and as a result, the diffstat shows a nice net reduction in code. - Softirq completion cleanups (Christoph) - Stop using ->queuedata (Christoph) - Cleanup bd claiming (Christoph) - Use check_events, moving away from the legacy media change (Christoph) - Use inode i_blkbits consistently (Christoph) - Remove old unused writeback congestion bits (Christoph) - Cleanup/unify submission path (Christoph) - Use bio_uninit consistently, instead of bio_disassociate_blkg (Christoph) - sbitmap cleared bits handling (John) - Request merging blktrace event addition (Jan) - sysfs add/remove race fixes (Luis) - blk-mq tag fixes/optimizations (Ming) - Duplicate words in comments (Randy) - Flush deferral cleanup (Yufen) - IO context locking/retry fixes (John) - struct_size() usage (Gustavo) - blk-iocost fixes (Chengming) - blk-cgroup IO stats fixes (Boris) - Various little fixes" * tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits) block: blk-timeout: delete duplicated word block: blk-mq-sched: delete duplicated word block: blk-mq: delete duplicated word block: genhd: delete duplicated words block: elevator: delete duplicated word and fix typos block: bio: delete duplicated words block: bfq-iosched: fix duplicated word iocost_monitor: start from the oldest usage index iocost: Fix check condition of iocg abs_vdebt block: Remove callback typedefs for blk_mq_ops block: Use non _rcu version of list functions for tag_set_list blk-cgroup: show global disk stats in root cgroup io.stat blk-cgroup: make iostat functions visible to stat printing block: improve discard bio alignment in __blkdev_issue_discard() block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers block: defer flush request no matter whether we have elevator block: make blk_timeout_init() static block: remove retry loop in ioc_release_fn() block: remove unnecessary ioc nested locking block: integrate bd_start_claiming into __blkdev_get ...