user/sven/linux.git/include/linux/device-mapper.h, branch v5.4.250

dm: remove special-casing of bio-based immutable singleton target on NVMe

2022-06-25T10:44:35Z

Commit 9c37de297f6590937f95a28bec1b7ac68a38618f upstream. There is no benefit to DM special-casing NVMe. Remove all code used to establish DM_TYPE_NVME_BIO_BASED. Also, remove 3 'struct mapped_device *md' variables in __map_bio() which masked the same variable that is available within __map_bio()'s scope. Tested-by: Guenter Roeck Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm: fix deadlock when swapping to encrypted device

2021-03-04T09:26:51Z

commit a666e5c05e7c4aaabb2c5d58117b0946803d03d2 upstream. The system would deadlock when swapping to a dm-crypt device. The reason is that for each incoming write bio, dm-crypt allocates memory that holds encrypted data. These excessive allocations exhaust all the memory and the result is either deadlock or OOM trigger. This patch limits the number of in-flight swap bios, so that the memory consumed by dm-crypt is limited. The limit is enforced if the target set the "limit_swap_bios" variable and if the bio has REQ_SWAP set. Non-swap bios are not affected becuase taking the semaphore would cause performance degradation. This is similar to request-based drivers - they will also block when the number of requests is over the limit. Signed-off-by: Mikulas Patocka Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm integrity: fix integrity recalculation that is improperly skipped

2020-07-29T08:18:45Z

commit 5df96f2b9f58a5d2dc1f30fe7de75e197f2c25f2 upstream. Commit adc0daad366b62ca1bce3e2958a40b0b71a8b8b3 ("dm: report suspended device during destroy") broke integrity recalculation. The problem is dm_suspended() returns true not only during suspend, but also during resume. So this race condition could occur: 1. dm_integrity_resume calls queue_work(ic->recalc_wq, &ic->recalc_work) 2. integrity_recalc (&ic->recalc_work) preempts the current thread 3. integrity_recalc calls if (unlikely(dm_suspended(ic->ti))) goto unlock_ret; 4. integrity_recalc exits and no recalculating is done. To fix this race condition, add a function dm_post_suspending that is only true during the postsuspend phase and use it instead of dm_suspended(). Signed-off-by: Mikulas Patocka Fixes: adc0daad366b ("dm: report suspended device during destroy") Cc: stable vger kernel org # v4.18+ Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

2019-07-18T21:49:33Z

Pull more device mapper updates from Mike Snitzer: - Fix zone state management race in DM zoned target by eliminating the unnecessary DMZ_ACTIVE state. - A couple fixes for issues the DM snapshot target's optional discard support added during first week of the 5.3 merge. - Increase default size of outstanding IO that is allowed for a each dm-kcopyd client and introduce tunable to allow user adjust. - Update DM core to use printk ratelimiting functions rather than duplicate them and in doing so fix an issue where DMDEBUG_LIMIT() rate limited KERN_DEBUG messages had excessive "callbacks suppressed" messages. * tag 'for-5.3/dm-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: use printk ratelimiting functions dm kcopyd: Increase default sub-job size to 512KB dm snapshot: fix oversights in optional discard support dm zoned: fix zone state management race

dm: use printk ratelimiting functions

2019-07-17T17:09:32Z

DM provided its own ratelimiting printk wrapper but given printk advances this is no longer needed. Also, switching DMDEBUG_LIMIT to using pr_debug_ratelimited() fixes the reported issue where DMDEBUG_LIMIT() still caused a flood of "callbacks suppressed" messages. Reported-by: Milan Broz Depends-on: 29fc2bc7539386 ("printk: pr_debug_ratelimited: check state first to reduce "callbacks suppressed" messages") Signed-off-by: Mike Snitzer

block: Kill gfp_t argument of blkdev_report_zones()

2019-07-12T02:04:37Z

Only GFP_KERNEL and GFP_NOIO are used with blkdev_report_zones(). In preparation of using vmalloc() for large report buffer and zone array allocations used by this function, remove its "gfp_t gfp_mask" argument and rely on the caller context to use memalloc_noio_save/restore() where necessary (block layer zone revalidation and dm-zoned I/O error path). Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Signed-off-by: Damien Le Moal Signed-off-by: Jens Axboe

dm mpath: fix missing call of path selector type->end_io

2019-04-25T19:38:52Z

After commit 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback"), map_request() will requeue the tio when issued clone request return BLK_STS_RESOURCE or BLK_STS_DEV_RESOURCE. Thus, if device driver status is error, a tio may be requeued multiple times until the return value is not DM_MAPIO_REQUEUE. That means type->start_io may be called multiple times, while type->end_io is only called when IO complete. In fact, even without commit 396eaf21ee17, setup_clone() failure can also cause tio requeue and associated missed call to type->end_io. The service-time path selector selects path based on in_flight_size, which is increased by st_start_io() and decreased by st_end_io(). Missed calls to st_end_io() can lead to in_flight_size count error and will cause the selector to make the wrong choice. In addition, queue-length path selector will also be affected. To fix the problem, call type->end_io in ->release_clone_rq before tio requeue. map_info is passed to ->release_clone_rq() for map_request() error path that result in requeue. Fixes: 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback") Cc: stable@vger.kernl.org Signed-off-by: Yufen Yu Signed-off-by: Mike Snitzer

dm: add support to directly boot to a mapped device

2019-03-05T19:53:50Z

Add a "create" module parameter, which allows device-mapper targets to be configured at boot time. This enables early use of DM targets in the boot process (as the root device or otherwise) without the need of an initramfs. The syntax used in the boot param is based on the concise format from the dmsetup tool to follow the rule of least surprise: dmsetup table --concise /dev/mapper/lroot Which is: dm-mod.create=,,,,[,

+][;,,,,

+]+] Where, ::= The device name. ::= xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | "" ::= The device minor number | "" ::= "ro" | "rw"

::= ::= "verity" | "linear" | ... For example, the following could be added in the boot parameters: dm-mod.create="lroot,,,rw, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" root=/dev/dm-0 Only the targets that were tested are allowed and the ones that don't change any block device when the device is create as read-only. For example, mirror and cache targets are not allowed. The rationale behind this is that if the user makes a mistake, choosing the wrong device to be the mirror or the cache can corrupt data. The only targets initially allowed are: * crypt * delay * linear * snapshot-origin * striped * verity Co-developed-by: Will Drewry Co-developed-by: Kees Cook Co-developed-by: Enric Balletbo i Serra Signed-off-by: Helen Koike Reviewed-by: Kees Cook Signed-off-by: Mike Snitzer

dm: fix to_sector() for 32bit

2019-03-05T19:48:52Z

A dm-raid array with devices larger than 4GB won't assemble on a 32 bit host since _check_data_dev_sectors() was added in 4.16. This is because to_sector() treats its argument as an "unsigned long" which is 32bits (4GB) on a 32bit host. Using "unsigned long long" is more correct. Kernels as early as 4.2 can have other problems due to to_sector() being used on the size of a device. Fixes: 0cf4503174c1 ("dm raid: add support for the MD RAID0 personality") cc: stable@vger.kernel.org (v4.2+) Reported-and-tested-by: Guillaume Perréal Signed-off-by: NeilBrown Signed-off-by: Mike Snitzer

dm: eliminate 'split_discard_bios' flag from DM target interface

2019-02-21T04:24:55Z

There is no need to have DM core split discards on behalf of a DM target now that blk_queue_split() handles splitting discards based on the queue_limits. A DM target just needs to set max_discard_sectors, discard_granularity, etc, in queue_limits. Signed-off-by: Mike Snitzer