user/sven/linux.git/include/linux/device.h, branch v6.12.28

cxl/port: Fix use-after-free, permit out-of-order decoder shutdown

2024-10-25T21:07:03Z

In support of investigating an initialization failure report [1], cxl_test was updated to register mock memory-devices after the mock root-port/bus device had been registered. That led to cxl_test crashing with a use-after-free bug with the following signature: cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1 cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1 cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0 1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1 [..] cxld_unregister: cxl decoder14.0: cxl_region_decode_reset: cxl_region region3: mock_decoder_reset: cxl_port port3: decoder3.0 reset 2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1 cxl_endpoint_decoder_release: cxl decoder14.0: [..] cxld_unregister: cxl decoder7.0: 3) cxl_region_decode_reset: cxl_region region3: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI [..] RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core] [..] Call Trace: cxl_region_decode_reset+0x69/0x190 [cxl_core] cxl_region_detach+0xe8/0x210 [cxl_core] cxl_decoder_kill_region+0x27/0x40 [cxl_core] cxld_unregister+0x5d/0x60 [cxl_core] At 1) a region has been established with 2 endpoint decoders (7.0 and 14.0). Those endpoints share a common switch-decoder in the topology (3.0). At teardown, 2), decoder14.0 is the first to be removed and hits the "out of order reset case" in the switch decoder. The effect though is that region3 cleanup is aborted leaving it in-tact and referencing decoder14.0. At 3) the second attempt to teardown region3 trips over the stale decoder14.0 object which has long since been deleted. The fix here is to recognize that the CXL specification places no mandate on in-order shutdown of switch-decoders, the driver enforces in-order allocation, and hardware enforces in-order commit. So, rather than fail and leave objects dangling, always remove them. In support of making cxl_region_decode_reset() always succeed, cxl_region_invalidate_memregion() failures are turned into warnings. Crashing the kernel is ok there since system integrity is at risk if caches cannot be managed around physical address mutation events like CXL region destruction. A new device_for_each_child_reverse_from() is added to cleanup port->commit_end after all dependent decoders have been disabled. In other words if decoders are allocated 0->1->2 and disabled 1->2->0 then port->commit_end only decrements from 2 after 2 has been disabled, and it decrements all the way to zero since 1 was disabled previously. Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1] Cc: stable@vger.kernel.org Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware") Reviewed-by: Jonathan Cameron Cc: Greg Kroah-Hartman Cc: Davidlohr Bueso Cc: Dave Jiang Cc: Alison Schofield Cc: Ira Weiny Cc: Zijun Hu Signed-off-by: Dan Williams Reviewed-by: Ira Weiny Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Ira Weiny

dma-mapping: clearly mark DMA ops as an architecture feature

2024-09-04T04:08:51Z

DMA ops are a helper for architectures and not for drivers to override the DMA implementation. Unfortunately driver authors keep ignoring this. Make the fact more clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers overriding their dma_ops depend on that. These drivers should probably be marked broken, but we can give them a bit of a grace period for that. Signed-off-by: Christoph Hellwig Reviewed-by: Thomas Gleixner Acked-by: Sakari Ailus # for IPU6 Acked-by: Robin Murphy

dma-mapping: direct calls for dma-iommu

2024-08-22T04:18:11Z

Directly call into dma-iommu just like we have been doing for dma-direct for a while. This avoids the indirect call overhead for IOMMU ops and removes the need to have DMA ops entirely for many common configurations. Signed-off-by: Leon Romanovsky Signed-off-by: Leon Romanovsky Acked-by: Greg Kroah-Hartman Acked-by: Robin Murphy Signed-off-by: Christoph Hellwig

driver core: make [device_]driver_attach take a const *

2024-06-20T10:51:42Z

Change device_driver_attach() and driver_attach() to take a const * to struct device driver as neither of them modify the structure at all. Also, for some odd reason, drivers/dma/idxd/compat.c had a duplicate external reference to device_driver_attach(), so remove that to fix up the build, it should never have had that there in the first place. Cc: Rafael J. Wysocki Cc: Fenghua Yu Cc: Dave Jiang Cc: Vinod Koul Cc: Andy Shevchenko Cc: Petr Tesarik Cc: Alexander Lobakin Cc: dmaengine@vger.kernel.org Link: https://lore.kernel.org/r/2024061401-rasping-manger-c385@gregkh Signed-off-by: Greg Kroah-Hartman

Merge tag 'v6.10-rc4' into driver-core-next

2024-06-17T06:33:41Z

We need the driver core and sysfs fixes in here to build on top of. Signed-off-by: Greg Kroah-Hartman

driver core: device.h: Group of_node handling declarations and definitions

2024-06-04T16:04:36Z

There are a few of_node related APIs defined in the driver core. Group the respective declarations and definitions in the header. There is no functional change. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240531145129.1506733-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman

driver core: remove devm_device_add_groups()

2024-06-04T13:53:36Z

There is no more in-kernel users of this function, and no driver should ever be using it, so remove it from the kernel. Acked-by: Dmitry Torokhov Acked-by: "Rafael J. Wysocki" Link: https://lore.kernel.org/r/20230704131715.44454-8-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2024-05-22T19:13:40Z

Pull driver core updates from Greg KH: "Here is the small set of driver core and kernfs changes for 6.10-rc1. Nothing major here at all, just a small set of changes for some driver core apis, and minor fixups. Included in here are: - sysfs_bin_attr_simple_read() helper added and used - device_show_string() helper added and used All usages of these were acked by the various maintainers. Also in here are: - kernfs minor cleanup - removed unused functions - typo fix in documentation - pay attention to sysfs_create_link() failures in module.c finally All of these have been in linux-next for a very long time with no reported problems" * tag 'driver-core-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: device property: Fix a typo in the description of device_get_child_node_count() kernfs: mount: Remove unnecessary ‘NULL’ values from knparent scsi: Use device_show_string() helper for sysfs attributes platform/x86: Use device_show_string() helper for sysfs attributes perf: Use device_show_string() helper for sysfs attributes IB/qib: Use device_show_string() helper for sysfs attributes hwmon: Use device_show_string() helper for sysfs attributes driver core: Add device_show_string() helper for sysfs attributes treewide: Use sysfs_bin_attr_simple_read() helper sysfs: Add sysfs_bin_attr_simple_read() helper module: don't ignore sysfs_create_link() failures driver core: Remove unused platform_notify, platform_notify_remove

dma: fix DMA sync for drivers not calling dma_set_mask*()

2024-05-09T17:00:29Z

There are several reports that the DMA sync shortcut broke non-coherent devices. dev->dma_need_sync is false after the &device allocation and if a driver didn't call dma_set_mask*(), it will still be false even if the device is not DMA-coherent and thus needs synchronizing. Due to historical reasons, there's still a lot of drivers not calling it. Invert the boolean, so that the sync will be performed by default and the shortcut will be enabled only when calling dma_set_mask*(). Reported-by: Steven Price Closes: https://lore.kernel.org/lkml/010686f5-3049-46a1-8230-7752a1b433ff@arm.com Reported-by: Marek Szyprowski Closes: https://lore.kernel.org/lkml/46160534-5003-4809-a408-6b3a3f4921e9@samsung.com Fixes: f406c8e4b770. ("dma: avoid redundant calls for sync operations") Signed-off-by: Alexander Lobakin Signed-off-by: Christoph Hellwig Tested-by: Steven Price Tested-by: Marek Szyprowski

dma: avoid redundant calls for sync operations

2024-05-07T11:29:53Z

Quite often, devices do not need dma_sync operations on x86_64 at least. Indeed, when dev_is_dma_coherent(dev) is true and dev_use_swiotlb(dev) is false, iommu_dma_sync_single_for_cpu() and friends do nothing. However, indirectly calling them when CONFIG_RETPOLINE=y consumes about 10% of cycles on a cpu receiving packets from softirq at ~100Gbit rate. Even if/when CONFIG_RETPOLINE is not set, there is a cost of about 3%. Add dev->need_dma_sync boolean and turn it off during the device initialization (dma_set_mask()) depending on the setup: dev_is_dma_coherent() for the direct DMA, !(sync_single_for_device || sync_single_for_cpu) or the new dma_map_ops flag, %DMA_F_CAN_SKIP_SYNC, advertised for non-NULL DMA ops. Then later, if/when swiotlb is used for the first time, the flag is reset back to on, from swiotlb_tbl_map_single(). On iavf, the UDP trafficgen with XDP_DROP in skb mode test shows +3-5% increase for direct DMA. Suggested-by: Christoph Hellwig # direct DMA shortcut Co-developed-by: Eric Dumazet Signed-off-by: Eric Dumazet Signed-off-by: Alexander Lobakin Signed-off-by: Christoph Hellwig