user/sven/linux.git/include/linux/dmaengine.h, branch v4.14.36

Merge branch 'topic/dmatest' into for-linus

2017-09-06T16:25:10Z

dmaengine: add DMA_PREP_CMD for non-Data descriptors.

2017-08-28T11:10:18Z

Some of the DMA controllers are capable of issuing the commands to peripheral by the DMA. These commands can be list of register reads/writes and its different from normal data reads/writes. This patch adds new flag DMA_PREP_CMD in DMA API which tells the driver that the data passed to DMA API is command data and DMA controller driver will form descriptor in the required format. This flag can be used by any DMA controller driver which requires the descriptor in different format for non-Data descriptors. Signed-off-by: Abhishek Sahu Signed-off-by: Vinod Koul

dmaengine: remove DMA_SG as it is dead code in kernel

2017-08-22T03:52:11Z

There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang Reviewed-by: Linus Walleij Cc: Gary Hook Cc: Ludovic Desroches Cc: Kedareswara rao Appana Cc: Li Yang Cc: Michal Simek Signed-off-by: Vinod Koul

dmaengine: Provide a wrapper for memcpy operations

2017-01-31T03:33:20Z

Almost all ->device_prep_dma_xx() methods have a wrapper defined in dmaengine.h. Add one for ->device_prep_dma_memcpy(). Signed-off-by: Boris Brezillon Signed-off-by: Vinod Koul

dmaengine: dma_slave_config: add support for slave port window

2016-11-30T03:24:04Z

Some slave devices uses address window instead of single register for read and/or write of data. With the src/dst_port_window_size the address window can be specified and the DMAengine driver should use this information to correctly set up the transfer to loop within the provided window. Signed-off-by: Peter Ujfalusi Signed-off-by: Vinod Koul

dmaengine: add support to provide error result from a DMA transation

2016-08-08T02:41:42Z

Adding a new callback that will provide the error result for a transaction. The result is allocated on the stack and the callback should create a copy if it wishes to retain the information after exiting. The result parameter is now defined and takes over the dummy void pointer we placed in the helper functions previously. dmaengine drivers should start converting to the new "callback_result" callback in order to receive transaction results. Signed-off-by: Dave Jiang Reviewed-by: Lars-Peter Clausen Signed-off-by: Vinod Koul

dmaengine: ensure dmaengine helpers check valid callback

2016-04-12T15:37:06Z

dmaengine has various device callbacks and exposes helper functions to invoke these. These helpers should check if channel, device and callback is valid or not before invoking them. Reported-by: Jon Hunter Signed-off-by: Vinod Koul

Merge branch 'topic/pl330' into for-linus

2016-03-14T05:48:12Z

dmaengine: make slave address physical

2016-02-22T15:52:40Z

The slave dmaengine semantics required the client to map dma addresses and pass DMA address to dmaengine drivers. This was a convenient notion coming from generic dma offload cases where dmaengines are interchangeable and client is not aware of which engine to map to. But in case of slave, we know the dmaengine and always use a specific one. Further the IOMMU cases can lead to failure of this notion, so make this as physical address and now dmaengine driver will do the required mapping. Original-patch-by: Linus Walleij Original-patch-Acked-by: Lee Jones Reviewed-by: Laurent Pinchart Acked-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Acked-by: Wolfram Sang Tested-by: Wolfram Sang Tested-by: Niklas Söderlund Signed-off-by: Vinod Koul

dmaengine: core: expose max burst capability to clients

2016-02-09T03:31:41Z

This patch add max_burst to dma_get_slave_caps for clients to get the burst capability of slave dma controller. Signed-off-by: Shawn Lin Signed-off-by: Caesar Wang Signed-off-by: Vinod Koul