user/sven/linux.git/include/linux/dmaengine.h, branch v4.9.147

dmaengine: add support to provide error result from a DMA transation

2016-08-08T02:41:42Z

Adding a new callback that will provide the error result for a transaction. The result is allocated on the stack and the callback should create a copy if it wishes to retain the information after exiting. The result parameter is now defined and takes over the dummy void pointer we placed in the helper functions previously. dmaengine drivers should start converting to the new "callback_result" callback in order to receive transaction results. Signed-off-by: Dave Jiang Reviewed-by: Lars-Peter Clausen Signed-off-by: Vinod Koul

dmaengine: ensure dmaengine helpers check valid callback

2016-04-12T15:37:06Z

dmaengine has various device callbacks and exposes helper functions to invoke these. These helpers should check if channel, device and callback is valid or not before invoking them. Reported-by: Jon Hunter Signed-off-by: Vinod Koul

Merge branch 'topic/pl330' into for-linus

2016-03-14T05:48:12Z

dmaengine: make slave address physical

2016-02-22T15:52:40Z

The slave dmaengine semantics required the client to map dma addresses and pass DMA address to dmaengine drivers. This was a convenient notion coming from generic dma offload cases where dmaengines are interchangeable and client is not aware of which engine to map to. But in case of slave, we know the dmaengine and always use a specific one. Further the IOMMU cases can lead to failure of this notion, so make this as physical address and now dmaengine driver will do the required mapping. Original-patch-by: Linus Walleij Original-patch-Acked-by: Lee Jones Reviewed-by: Laurent Pinchart Acked-by: Arnd Bergmann Acked-by: Geert Uytterhoeven Acked-by: Wolfram Sang Tested-by: Wolfram Sang Tested-by: Niklas Söderlund Signed-off-by: Vinod Koul

dmaengine: core: expose max burst capability to clients

2016-02-09T03:31:41Z

This patch add max_burst to dma_get_slave_caps for clients to get the burst capability of slave dma controller. Signed-off-by: Shawn Lin Signed-off-by: Caesar Wang Signed-off-by: Vinod Koul

Merge branch 'topic/async' into for-linus

2016-01-06T09:47:47Z

Merge branch 'topic/univ_api' into for-linus

2016-01-06T09:47:32Z

dmaengine: core: Introduce new, universal API to request a channel

2015-12-18T05:47:26Z

The two API function can cover most, if not all current APIs used to request a channel. With minimal effort dmaengine drivers, platforms and dmaengine user drivers can be converted to use the two function. struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask); To request any channel matching with the requested capabilities, can be used to request channel for memcpy, memset, xor, etc where no hardware synchronization is needed. struct dma_chan *dma_request_chan(struct device *dev, const char *name); To request a slave channel. The dma_request_chan() will try to find the channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode it will use a filter lookup table and retrieves the needed information from the dma_slave_map provided by the DMA drivers. This legacy mode needs changes in platform code, in dmaengine drivers and finally the dmaengine user drivers can be converted: For each dmaengine driver an array of DMA device, slave and the parameter for the filter function needs to be added: static const struct dma_slave_map da830_edma_map[] = { { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) }, { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) }, { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) }, { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) }, { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) }, { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) }, { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) }, { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) }, { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) }, { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) }, { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) }, { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) }, }; This information is going to be needed by the dmaengine driver, so modification to the platform_data is needed, and the driver map should be added to the pdata of the DMA driver: da8xx_edma0_pdata.slave_map = da830_edma_map; da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map); The DMA driver then needs to configure the needed device -> filter_fn mapping before it registers with dma_async_device_register() : ecc->dma_slave.filter_map.map = info->slave_map; ecc->dma_slave.filter_map.mapcnt = info->slavecnt; ecc->dma_slave.filter_map.fn = edma_filter_fn; When neither DT or ACPI lookup is available the dma_request_chan() will try to match the requester's device name with the filter_map's list of device names, when a match found it will use the information from the dma_slave_map to get the channel with the dma_get_channel() internal function. Signed-off-by: Peter Ujfalusi Reviewed-by: Arnd Bergmann Signed-off-by: Vinod Koul

dmaengine: Add might_sleep() to dmaengine_synchronize()

2015-12-05T08:13:30Z

Implementations of dmaengine_synchronize() are allowed to sleep, hence the function must not be called to from atomic context. Add might_sleep() to dmaengine_synchronize() to make it easier to detect non-compliant callers. Suggested-by: Andy Shevchenko Signed-off-by: Lars-Peter Clausen Signed-off-by: Vinod Koul

dmaengine: enable DMA_CTRL_REUSE

2015-11-16T03:02:16Z

In the current state, the capability of transfer reuse can neither be set by a slave dmaengine driver, nor used by a client driver, because the capability is not available to dma_get_slave_caps(). Fix this by adding a way to declare the capability. Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE") Signed-off-by: Robert Jarzmik Signed-off-by: Vinod Koul