user/sven/linux.git/include/linux/dmaengine.h, branch v5.15.26

dmaengine: remove debugfs #ifdef

2021-11-25T08:48:41Z

commit b3b180e735409ca0c76642014304b59482e0e653 upstream. The ptdma driver has added debugfs support, but this fails to build when debugfs is disabled: drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup': drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root' 93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt, | ^ drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root' 96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt, | ^ drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root' 102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root); | ^ Remove the #ifdef in the header, as this only saves a few bytes, but would require ugly #ifdefs in each driver using it. Simplify the other user while we're at it. Fixes: e2fb2e2a33fa ("dmaengine: ptdma: Add debugfs entries for PTDMA") Fixes: 26cf132de6f7 ("dmaengine: Create debug directories for DMA devices") Signed-off-by: Arnd Bergmann Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/20210920122017.205975-1-arnd@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: Extend the dma_slave_width for 128 bytes

2021-08-29T13:44:19Z

Add DMA_SLAVE_BUSWIDTH_128_BYTES to dma_slave_width for DMA engines and users to select 128 bytes as bus width. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210806095322.2326-3-biju.das.jz@bp.renesas.com Signed-off-by: Vinod Koul

dmaengine: Move kdoc description of struct dma_chan_percpu closer to it

2021-05-31T04:20:38Z

We have split by unknown reason of kdoc and struct dma_chan_percpu definition. Join them back. No functional change. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210518104323.37632-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul

dmaengine: Extend the dmaengine_alignment for 128 and 256 bytes

2021-01-13T16:30:37Z

Some DMA device can benefit with higher order of alignment than the maximum of 64 bytes currently defined. Define 128 and 256 bytes alignment for these devices. Signed-off-by: Peter Ujfalusi Signed-off-by: Peter Ujfalusi Tested-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20210113114923.9231-2-peter.ujfalusi@gmail.com Signed-off-by: Vinod Koul

dmaengine: Add support for per channel coherency handling

2020-12-11T15:50:08Z

If the DMA device supports per channel coherency configuration (a channel can be configured to have coherent or not coherent view) then a single device (the DMA controller's device) can not be used for dma_api for all channels as channels can have different coherency. Introduce custom_dma_mapping flag for the dma_chan and a new helper to get the device pointer to be used for dma_api for the given channel. Client drivers should be updated to be able to support per channel coherency by: - dma_map_single(chan->device->dev, ptr, size, DMA_TO_DEVICE); + struct device *dma_dev = dmaengine_get_dma_device(chan); + + dma_map_single(dma_dev, ptr, size, DMA_TO_DEVICE); Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20201208090440.31792-9-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

dmaengine: of-dma: Add support for optional router configuration callback

2020-12-11T15:50:08Z

Additional configuration for the DMA event router might be needed for a channel which can not be done during device_alloc_chan_resources callback since the router information is not yet present for the drivers. If there is a need for additional configuration for the channel if DMA router is in use, then the driver can implement the device_router_config callback. Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20201208090440.31792-8-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

dmaengine: add peripheral configuration

2020-11-24T16:12:04Z

Some complex dmaengine controllers have capability to program the peripheral device, so pass on the peripheral configuration as part of dma_slave_config Link: https://lore.kernel.org/r/20201109085450.24843-3-vkoul@kernel.org Signed-off-by: Vinod Koul

dmaengine: Mark dma_request_slave_channel() deprecated

2020-09-03T06:51:03Z

New drivers should use dma_request_chan() instead dma_request_slave_channel() dma_request_slave_channel() is a simple wrapper for dma_request_chan() eating up the error code for channel request failure and makes deferred probing impossible. Move the dma_request_slave_channel() into the header as inline function, mark it as deprecated. Signed-off-by: Peter Ujfalusi Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200828110507.22407-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

dmaengine: Remove unused define for dma_request_slave_channel_reason()

2020-08-28T10:32:05Z

No users left in the kernel, it can be removed. Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200828084141.14902-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul

Merge tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2020-08-07T19:41:36Z

Pull dmaengine updates from Vinod Koul: "Core: - Support out of order dma completion - Support for repeating transaction New controllers: - Support for Actions S700 DMA engine - Renesas R8A774E1, r8a7742 controller binding - New driver for Xilinx DPDMA controller Other: - Support of out of order dma completion in idxd driver - W=1 warning cleanup of subsystem - Updates to ti-k3-dma, dw, idxd drivers" * tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits) dmaengine: dw: Don't include unneeded header to platform data header dmaengine: Actions: Add support for S700 DMA engine dmaengine: Actions: get rid of bit fields from dma descriptor dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml dmaengine: idxd: add missing invalid flags field to completion dmaengine: dw: Initialize max_sg_burst capability dmaengine: dw: Introduce max burst length hw config dmaengine: dw: Initialize min and max burst DMA device capability dmaengine: dw: Set DMA device max segment size parameter dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config dmaengine: Introduce DMA-device device_caps callback dmaengine: Introduce max SG burst capability dmaengine: Introduce min burst length capability dt-bindings: dma: dw: Add max burst transaction length property dt-bindings: dma: dw: Convert DW DMAC to DT binding dmaengine: ti: k3-udma: Query throughput level information from hardware dmaengine: ti: k3-udma: Use defines for capabilities register parsing dmaengine: xilinx: dpdma: Fix kerneldoc warning dmaengine: xilinx: dpdma: add missing kernel doc dmaengine: xilinx: dpdma: remove comparison of unsigned expression ...