user/sven/linux.git/include/linux/efi.h, branch v5.4.119

efi: use 32-bit alignment for efi_guid_t literals

2021-03-24T10:26:45Z

commit fb98cc0b3af2ba4d87301dff2b381b12eee35d7d upstream. Commit 494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t") updated the type definition of efi_guid_t to ensure that it always appears sufficiently aligned (the UEFI spec is ambiguous about this, but given the fact that its EFI_GUID type is defined in terms of a struct carrying a uint32_t, the natural alignment is definitely >= 32 bits). However, we missed the EFI_GUID() macro which is used to instantiate efi_guid_t literals: that macro is still based on the guid_t type, which does not have a minimum alignment at all. This results in warnings such as In file included from drivers/firmware/efi/mokvar-table.c:35: include/linux/efi.h:1093:34: warning: passing 1-byte aligned argument to 4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer access [-Walign-mismatch] status = get_var(L"SecureBoot", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size, ^ include/linux/efi.h:1101:24: warning: passing 1-byte aligned argument to 4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer access [-Walign-mismatch] get_var(L"SetupMode", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size, &setupmode); The distinction only matters on CPUs that do not support misaligned loads fully, but 32-bit ARM's load-multiple instructions fall into that category, and these are likely to be emitted by the compiler that built the firmware for loading word-aligned 128-bit GUIDs from memory So re-implement the initializer in terms of our own efi_guid_t type, so that the alignment becomes a property of the literal's type. Fixes: 494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t") Reported-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Link: https://github.com/ClangBuiltLinux/linux/issues/1327 Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman

efi: provide empty efi_enter_virtual_mode implementation

2020-09-03T09:26:49Z

[ Upstream commit 2c547f9da0539ad1f7ef7f08c8c82036d61b011a ] When CONFIG_EFI is not enabled, we might get an undefined reference to efi_enter_virtual_mode() error, if this efi_enabled() call isn't inlined into start_kernel(). This happens in particular, if start_kernel() is annodated with __no_sanitize_address. Reported-by: kernel test robot Signed-off-by: Andrey Konovalov Signed-off-by: Andrew Morton Acked-by: Ard Biesheuvel Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: Catalin Marinas Cc: Dmitry Vyukov Cc: Elena Petrova Cc: Marco Elver Cc: Vincenzo Frascino Cc: Walter Wu Link: http://lkml.kernel.org/r/6514652d3a32d3ed33d6eb5c91d0af63bf0d1a0c.1596544734.git.andreyknvl@google.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

x86, efi: Never relocate kernel below lowest acceptable address

2019-10-31T08:40:19Z

Currently, kernel fails to boot on some HyperV VMs when using EFI. And it's a potential issue on all x86 platforms. It's caused by broken kernel relocation on EFI systems, when below three conditions are met: 1. Kernel image is not loaded to the default address (LOAD_PHYSICAL_ADDR) by the loader. 2. There isn't enough room to contain the kernel, starting from the default load address (eg. something else occupied part the region). 3. In the memmap provided by EFI firmware, there is a memory region starts below LOAD_PHYSICAL_ADDR, and suitable for containing the kernel. EFI stub will perform a kernel relocation when condition 1 is met. But due to condition 2, EFI stub can't relocate kernel to the preferred address, so it fallback to ask EFI firmware to alloc lowest usable memory region, got the low region mentioned in condition 3, and relocated kernel there. It's incorrect to relocate the kernel below LOAD_PHYSICAL_ADDR. This is the lowest acceptable kernel relocation address. The first thing goes wrong is in arch/x86/boot/compressed/head_64.S. Kernel decompression will force use LOAD_PHYSICAL_ADDR as the output address if kernel is located below it. Then the relocation before decompression, which move kernel to the end of the decompression buffer, will overwrite other memory region, as there is no enough memory there. To fix it, just don't let EFI stub relocate the kernel to any address lower than lowest acceptable address. [ ardb: introduce efi_low_alloc_above() to reduce the scope of the change ] Signed-off-by: Kairui Song Signed-off-by: Ard Biesheuvel Acked-by: Jarkko Sakkinen Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191029173755.27149-6-ardb@kernel.org Signed-off-by: Ingo Molnar

efi: Export Runtime Configuration Interface table to sysfs

2019-08-08T08:10:25Z

System firmware advertises the address of the 'Runtime Configuration Interface table version 2 (RCI2)' via an EFI Configuration Table entry. This code retrieves the RCI2 table from the address and exports it to sysfs as a binary attribute 'rci2' under /sys/firmware/efi/tables directory. The approach adopted is similar to the attribute 'DMI' under /sys/firmware/dmi/tables. RCI2 table contains BIOS HII in XML format and is used to populate BIOS setup page in Dell EMC OpenManage Server Administrator tool. The BIOS setup page contains BIOS tokens which can be configured. Signed-off-by: Narendra K Reviewed-by: Mario Limonciello Signed-off-by: Ard Biesheuvel

efi: ia64: move SAL systab handling out of generic EFI code

2019-08-08T08:01:48Z

The SAL systab is an Itanium specific EFI configuration table, so move its handling into arch/ia64 where it belongs. Signed-off-by: Ard Biesheuvel

efi/x86: move UV_SYSTAB handling into arch/x86

2019-08-08T08:01:48Z

The SGI UV UEFI machines are tightly coupled to the x86 architecture so there is no need to keep any awareness of its existence in the generic EFI layer, especially since we already have the infrastructure to handle arch-specific configuration tables, and were even already using it to some extent. Signed-off-by: Ard Biesheuvel

efi: x86: move efi_is_table_address() into arch/x86

2019-08-08T08:01:48Z

The function efi_is_table_address() and the associated array of table pointers is specific to x86. Since we will be adding some more x86 specific tables, let's move this code out of the generic code first. Signed-off-by: Ard Biesheuvel

tpm: Don't duplicate events from the final event log in the TCG2 log

2019-06-24T20:57:50Z

After the first call to GetEventLog() on UEFI systems using the TCG2 crypto agile log format, any further log events (other than those triggered by ExitBootServices()) will be logged in both the main log and also in the Final Events Log. While the kernel only calls GetEventLog() immediately before ExitBootServices(), we can't control whether earlier parts of the boot process have done so. This will result in log entries that exist in both logs, and so the current approach of simply appending the Final Event Log to the main log will result in events being duplicated. We can avoid this problem by looking at the size of the Final Event Log just before we call ExitBootServices() and exporting this to the main kernel. The kernel can then skip over all events that occured before ExitBootServices() and only append events that were not also logged to the main log. Signed-off-by: Matthew Garrett Reported-by: Joe Richey Suggested-by: Joe Richey Acked-by: Ard Biesheuvel Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: Reserve the TPM final events table

2019-06-24T20:57:49Z

UEFI systems provide a boot services protocol for obtaining the TPM event log, but this is unusable after ExitBootServices() is called. Unfortunately ExitBootServices() itself triggers additional TPM events that then can't be obtained using this protocol. The platform provides a mechanism for the OS to obtain these events by recording them to a separate UEFI configuration table which the OS can then map. Unfortunately this table isn't self describing in terms of providing its length, so we need to parse the events inside it to figure out how long it is. Since the table isn't mapped at this point, we need to extend the length calculation function to be able to map the event as it goes along. (Fixes by Bartosz Szczepanek ) Signed-off-by: Matthew Garrett Acked-by: Ard Biesheuvel Reviewed-by: Bartosz Szczepanek Tested-by: Bartosz Szczepanek Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T

2019-04-16T08:01:24Z

Upon reboot, the Acer TravelMate X514-51T laptop appears to complete the shutdown process, but then it hangs in BIOS POST with a black screen. The problem is intermittent - at some points it has appeared related to Secure Boot settings or different kernel builds, but ultimately we have not been able to identify the exact conditions that trigger the issue to come and go. Besides, the EFI mode cannot be disabled in the BIOS of this model. However, after extensive testing, we observe that using the EFI reboot method reliably avoids the issue in all cases. So add a boot time quirk to use EFI reboot on such systems. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=203119 Signed-off-by: Jian-Hong Pan Signed-off-by: Daniel Drake Cc: Ard Biesheuvel Cc: Borislav Petkov Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Cc: linux@endlessm.com Link: http://lkml.kernel.org/r/20190412080152.3718-1-jian-hong@endlessm.com [ Fix !CONFIG_EFI build failure, clarify the code and the changelog a bit. ] Signed-off-by: Ingo Molnar