user/sven/linux.git/include/linux/efi.h, branch v5.4.90

efi: provide empty efi_enter_virtual_mode implementation

2020-09-03T09:26:49Z

[ Upstream commit 2c547f9da0539ad1f7ef7f08c8c82036d61b011a ] When CONFIG_EFI is not enabled, we might get an undefined reference to efi_enter_virtual_mode() error, if this efi_enabled() call isn't inlined into start_kernel(). This happens in particular, if start_kernel() is annodated with __no_sanitize_address. Reported-by: kernel test robot Signed-off-by: Andrey Konovalov Signed-off-by: Andrew Morton Acked-by: Ard Biesheuvel Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: Catalin Marinas Cc: Dmitry Vyukov Cc: Elena Petrova Cc: Marco Elver Cc: Vincenzo Frascino Cc: Walter Wu Link: http://lkml.kernel.org/r/6514652d3a32d3ed33d6eb5c91d0af63bf0d1a0c.1596544734.git.andreyknvl@google.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

x86, efi: Never relocate kernel below lowest acceptable address

2019-10-31T08:40:19Z

Currently, kernel fails to boot on some HyperV VMs when using EFI. And it's a potential issue on all x86 platforms. It's caused by broken kernel relocation on EFI systems, when below three conditions are met: 1. Kernel image is not loaded to the default address (LOAD_PHYSICAL_ADDR) by the loader. 2. There isn't enough room to contain the kernel, starting from the default load address (eg. something else occupied part the region). 3. In the memmap provided by EFI firmware, there is a memory region starts below LOAD_PHYSICAL_ADDR, and suitable for containing the kernel. EFI stub will perform a kernel relocation when condition 1 is met. But due to condition 2, EFI stub can't relocate kernel to the preferred address, so it fallback to ask EFI firmware to alloc lowest usable memory region, got the low region mentioned in condition 3, and relocated kernel there. It's incorrect to relocate the kernel below LOAD_PHYSICAL_ADDR. This is the lowest acceptable kernel relocation address. The first thing goes wrong is in arch/x86/boot/compressed/head_64.S. Kernel decompression will force use LOAD_PHYSICAL_ADDR as the output address if kernel is located below it. Then the relocation before decompression, which move kernel to the end of the decompression buffer, will overwrite other memory region, as there is no enough memory there. To fix it, just don't let EFI stub relocate the kernel to any address lower than lowest acceptable address. [ ardb: introduce efi_low_alloc_above() to reduce the scope of the change ] Signed-off-by: Kairui Song Signed-off-by: Ard Biesheuvel Acked-by: Jarkko Sakkinen Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191029173755.27149-6-ardb@kernel.org Signed-off-by: Ingo Molnar

efi: Export Runtime Configuration Interface table to sysfs

2019-08-08T08:10:25Z

System firmware advertises the address of the 'Runtime Configuration Interface table version 2 (RCI2)' via an EFI Configuration Table entry. This code retrieves the RCI2 table from the address and exports it to sysfs as a binary attribute 'rci2' under /sys/firmware/efi/tables directory. The approach adopted is similar to the attribute 'DMI' under /sys/firmware/dmi/tables. RCI2 table contains BIOS HII in XML format and is used to populate BIOS setup page in Dell EMC OpenManage Server Administrator tool. The BIOS setup page contains BIOS tokens which can be configured. Signed-off-by: Narendra K Reviewed-by: Mario Limonciello Signed-off-by: Ard Biesheuvel

efi: ia64: move SAL systab handling out of generic EFI code

2019-08-08T08:01:48Z

The SAL systab is an Itanium specific EFI configuration table, so move its handling into arch/ia64 where it belongs. Signed-off-by: Ard Biesheuvel

efi/x86: move UV_SYSTAB handling into arch/x86

2019-08-08T08:01:48Z

The SGI UV UEFI machines are tightly coupled to the x86 architecture so there is no need to keep any awareness of its existence in the generic EFI layer, especially since we already have the infrastructure to handle arch-specific configuration tables, and were even already using it to some extent. Signed-off-by: Ard Biesheuvel

efi: x86: move efi_is_table_address() into arch/x86

2019-08-08T08:01:48Z

The function efi_is_table_address() and the associated array of table pointers is specific to x86. Since we will be adding some more x86 specific tables, let's move this code out of the generic code first. Signed-off-by: Ard Biesheuvel

tpm: Don't duplicate events from the final event log in the TCG2 log

2019-06-24T20:57:50Z

After the first call to GetEventLog() on UEFI systems using the TCG2 crypto agile log format, any further log events (other than those triggered by ExitBootServices()) will be logged in both the main log and also in the Final Events Log. While the kernel only calls GetEventLog() immediately before ExitBootServices(), we can't control whether earlier parts of the boot process have done so. This will result in log entries that exist in both logs, and so the current approach of simply appending the Final Event Log to the main log will result in events being duplicated. We can avoid this problem by looking at the size of the Final Event Log just before we call ExitBootServices() and exporting this to the main kernel. The kernel can then skip over all events that occured before ExitBootServices() and only append events that were not also logged to the main log. Signed-off-by: Matthew Garrett Reported-by: Joe Richey Suggested-by: Joe Richey Acked-by: Ard Biesheuvel Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: Reserve the TPM final events table

2019-06-24T20:57:49Z

UEFI systems provide a boot services protocol for obtaining the TPM event log, but this is unusable after ExitBootServices() is called. Unfortunately ExitBootServices() itself triggers additional TPM events that then can't be obtained using this protocol. The platform provides a mechanism for the OS to obtain these events by recording them to a separate UEFI configuration table which the OS can then map. Unfortunately this table isn't self describing in terms of providing its length, so we need to parse the events inside it to figure out how long it is. Since the table isn't mapped at this point, we need to extend the length calculation function to be able to map the event as it goes along. (Fixes by Bartosz Szczepanek ) Signed-off-by: Matthew Garrett Acked-by: Ard Biesheuvel Reviewed-by: Bartosz Szczepanek Tested-by: Bartosz Szczepanek Reviewed-by: Jarkko Sakkinen Tested-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

x86/reboot, efi: Use EFI reboot for Acer TravelMate X514-51T

2019-04-16T08:01:24Z

Upon reboot, the Acer TravelMate X514-51T laptop appears to complete the shutdown process, but then it hangs in BIOS POST with a black screen. The problem is intermittent - at some points it has appeared related to Secure Boot settings or different kernel builds, but ultimately we have not been able to identify the exact conditions that trigger the issue to come and go. Besides, the EFI mode cannot be disabled in the BIOS of this model. However, after extensive testing, we observe that using the EFI reboot method reliably avoids the issue in all cases. So add a boot time quirk to use EFI reboot on such systems. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=203119 Signed-off-by: Jian-Hong Pan Signed-off-by: Daniel Drake Cc: Ard Biesheuvel Cc: Borislav Petkov Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Cc: linux@endlessm.com Link: http://lkml.kernel.org/r/20190412080152.3718-1-jian-hong@endlessm.com [ Fix !CONFIG_EFI build failure, clarify the code and the changelog a bit. ] Signed-off-by: Ingo Molnar

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

2019-03-10T17:17:23Z

Pull arm64 updates from Catalin Marinas: - Pseudo NMI support for arm64 using GICv3 interrupt priorities - uaccess macros clean-up (unsafe user accessors also merged but reverted, waiting for objtool support on arm64) - ptrace regsets for Pointer Authentication (ARMv8.3) key management - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by the riscv maintainers) - arm64/perf updates: PMU bindings converted to json-schema, unused variable and misleading comment removed - arm64/debug fixes to ensure checking of the triggering exception level and to avoid the propagation of the UNKNOWN FAR value into the si_code for debug signals - Workaround for Fujitsu A64FX erratum 010001 - lib/raid6 ARM NEON optimisations - NR_CPUS now defaults to 256 on arm64 - Minor clean-ups (documentation/comments, Kconfig warning, unused asm-offsets, clang warnings) - MAINTAINERS update for list information to the ARM64 ACPI entry * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) arm64: mmu: drop paging_init comments arm64: debug: Ensure debug handlers check triggering exception level arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals Revert "arm64: uaccess: Implement unsafe accessors" arm64: avoid clang warning about self-assignment arm64: Kconfig.platforms: fix warning unmet direct dependencies lib/raid6: arm: optimize away a mask operation in NEON recovery routine lib/raid6: use vdupq_n_u8 to avoid endianness warnings arm64: io: Hook up __io_par() for inX() ordering riscv: io: Update __io_[p]ar() macros to take an argument asm-generic/io: Pass result of I/O accessor to __io_[p]ar() arm64: Add workaround for Fujitsu A64FX erratum 010001 arm64: Rename get_thread_info() arm64: Remove documentation about TIF_USEDFPU arm64: irqflags: Fix clang build warnings arm64: Enable the support of pseudo-NMIs arm64: Skip irqflags tracing for NMI in IRQs disabled context arm64: Skip preemption when exiting an NMI arm64: Handle serror in NMI context irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI ...