user/sven/linux.git/include/linux/ethtool.h, branch v4.14.92

net: ethtool: Add missing kernel doc for FEC parameters

2018-06-20T19:02:48Z

[ Upstream commit d805c5209350ae725e3a1ee0204ba27d9e75ce3e ] While adding support for ethtool::get_fecparam and set_fecparam, kernel doc for these functions was missed, add those. Fixes: 1a5f3da20bd9 ("net: ethtool: add support for forward error correction modes") Signed-off-by: Florian Fainelli Acked-by: Roopa Prabhu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

net: ethtool: Add macro to clear a link mode setting

2017-08-18T23:30:17Z

There are currently macros to set and test an ETHTOOL_LINK_MODE_ setting, but not to clear one. Add a macro to clear an ETHTOOL_LINK_MODE_ setting. Signed-off-by: Tom Lendacky Signed-off-by: David S. Miller

net: ethtool: add support for forward error correction modes

2017-07-30T06:23:44Z

Forward Error Correction (FEC) modes i.e Base-R and Reed-Solomon modes are introduced in 25G/40G/100G standards for providing good BER at high speeds. Various networking devices which support 25G/40G/100G provides ability to manage supported FEC modes and the lack of FEC encoding control and reporting today is a source for interoperability issues for many vendors. FEC capability as well as specific FEC mode i.e. Base-R or RS modes can be requested or advertised through bits D44:47 of base link codeword. This patch set intends to provide option under ethtool to manage and report FEC encoding settings for networking devices as per IEEE 802.3 bj, bm and by specs. set-fec/show-fec option(s) are designed to provide control and report the FEC encoding on the link. SET FEC option: root@tor: ethtool --set-fec swp1 encoding [off | RS | BaseR | auto] Encoding: Types of encoding Off : Turning off any encoding RS : enforcing RS-FEC encoding on supported speeds BaseR : enforcing Base R encoding on supported speeds Auto : IEEE defaults for the speed/medium combination Here are a few examples of what we would expect if encoding=auto: - if autoneg is on, we are expecting FEC to be negotiated as on or off as long as protocol supports it - if the hardware is capable of detecting the FEC encoding on it's receiver it will reconfigure its encoder to match - in absence of the above, the configuration would be set to IEEE defaults. >From our understanding , this is essentially what most hardware/driver combinations are doing today in the absence of a way for users to control the behavior. SHOW FEC option: root@tor: ethtool --show-fec swp1 FEC parameters for swp1: Active FEC encodings: RS Configured FEC encodings: RS | BaseR ETHTOOL DEVNAME output modification: ethtool devname output: root@tor:~# ethtool swp1 Settings for swp1: root@hpe-7712-03:~# ethtool swp18 Settings for swp18: Supported ports: [ FIBRE ] Supported link modes: 40000baseCR4/Full 40000baseSR4/Full 40000baseLR4/Full 100000baseSR4/Full 100000baseCR4/Full 100000baseLR4_ER4/Full Supported pause frame use: No Supports auto-negotiation: Yes Supported FEC modes: [RS | BaseR | None | Not reported] Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: [RS | BaseR | None | Not reported] <<<< One or more FEC modes Speed: 100000Mb/s Duplex: Full Port: FIBRE PHYAD: 106 Transceiver: internal Auto-negotiation: off Link detected: yes This patch includes following changes a) New ETHTOOL_SFECPARAM/SFECPARAM API, handled by the new get_fecparam/set_fecparam callbacks, provides support for configuration of forward error correction modes. b) Link mode bits for FEC modes i.e. None (No FEC mode), RS, BaseR/FC are defined so that users can configure these fec modes for supported and advertising fields as part of link autonegotiation. Signed-off-by: Vidya Sagar Ravipati Signed-off-by: Dustin Byford Signed-off-by: Roopa Prabhu Signed-off-by: David S. Miller

ethtool: add CRC32 as an RSS hash function

2017-03-10T00:39:58Z

CRC32 engines are usually easily available in hardware and generate OK spread for RSS hash. Add CRC32 RSS hash function to ethtool API. Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller

net: ethtool: export conversion function between u32 and link mode

2016-04-18T18:45:08Z

The function convert_legacy_u32_to_link_mode and convert_link_mode_to_legacy_u32 may be used outside of ethtool.c. We rename them to ethtool_convert_... and export them, so we could use them in others drivers and modules. Signed-off-by: Philippe Reynes Signed-off-by: David S. Miller

net: ethtool: remove unused __ethtool_get_settings

2016-02-26T03:06:47Z

replaced by __ethtool_get_link_ksettings. Signed-off-by: David Decotigny Signed-off-by: David S. Miller

net: ethtool: add new ETHTOOL_xLINKSETTINGS API

2016-02-26T03:06:45Z

This patch defines a new ETHTOOL_GLINKSETTINGS/SLINKSETTINGS API, handled by the new get_link_ksettings/set_link_ksettings callbacks. This API provides support for most legacy ethtool_cmd fields, adds support for larger link mode masks (up to 4064 bits, variable length), and removes ethtool_cmd deprecated fields (transceiver/maxrxpkt/maxtxpkt). This API is deprecating the legacy ETHTOOL_GSET/SSET API and provides the following backward compatibility properties: - legacy ethtool with legacy drivers: no change, still using the get_settings/set_settings callbacks. - legacy ethtool with new get/set_link_ksettings drivers: the new driver callbacks are used, data internally converted to legacy ethtool_cmd. ETHTOOL_GSET will return only the 1st 32b of each link mode mask. ETHTOOL_SSET will fail if user tries to set the ethtool_cmd deprecated fields to non-0 (transceiver/maxrxpkt/maxtxpkt). A kernel warning is logged if driver sets higher bits. - future ethtool with legacy drivers: no change, still using the get_settings/set_settings callbacks, internally converted to new data structure. Deprecated fields (transceiver/maxrxpkt/maxtxpkt) will be ignored and seen as 0 from user space. Note that that "future" ethtool tool will not allow changes to these deprecated fields. - future ethtool with new drivers: direct call to the new callbacks. By "future" ethtool, what is meant is: - query: first try ETHTOOL_GLINKSETTINGS, and revert to ETHTOOL_GSET if fails - set: query first and remember which of ETHTOOL_GLINKSETTINGS or ETHTOOL_GSET was successful + if ETHTOOL_GLINKSETTINGS was successful, then change config with ETHTOOL_SLINKSETTINGS. A failure there is final (do not try ETHTOOL_SSET). + otherwise ETHTOOL_GSET was successful, change config with ETHTOOL_SSET. A failure there is final (do not try ETHTOOL_SLINKSETTINGS). The interaction user/kernel via the new API requires a small ETHTOOL_GLINKSETTINGS handshake first to agree on the length of the link mode bitmaps. If kernel doesn't agree with user, it returns the bitmap length it is expecting from user as a negative length (and cmd field is 0). When kernel and user agree, kernel returns valid info in all fields (ie. link mode length > 0 and cmd is ETHTOOL_GLINKSETTINGS). Data structure crossing user/kernel boundary is 32/64-bit agnostic. Converted internally to a legal kernel bitmap. The internal __ethtool_get_settings kernel helper will gradually be replaced by __ethtool_get_link_ksettings by the time the first "link_settings" drivers start to appear. So this patch doesn't change it, it will be removed before it needs to be changed. Signed-off-by: David Decotigny Signed-off-by: David S. Miller

net/ethtool: support set coalesce per queue

2016-02-20T03:54:10Z

This patch implements sub command ETHTOOL_SCOALESCE for ioctl ETHTOOL_PERQUEUE. It introduces an interface set_per_queue_coalesce to set coalesce of each masked queue to device driver. The wanted coalesce information are stored in "data" for each masked queue, which can copy from userspace. If it fails to set coalesce to device driver, the value which already set to specific queue will be tried to rollback. Signed-off-by: Kan Liang Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller

net/ethtool: support get coalesce per queue

2016-02-20T03:54:09Z

This patch implements sub command ETHTOOL_GCOALESCE for ioctl ETHTOOL_PERQUEUE. It introduces an interface get_per_queue_coalesce to get coalesce of each masked queue from device driver. Then the interrupt coalescing parameters will be copied back to user space one by one. Signed-off-by: Kan Liang Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller