user/sven/linux.git/include/linux/ethtool.h, branch v6.14.6

net: move HDS config from ethtool state

2025-01-20T19:44:57Z

Separate the HDS config from the ethtool state struct. The HDS config contains just simple parameters, not state. Having it as a separate struct will make it easier to clone / copy and also long term potentially make it per-queue. Reviewed-by: Michael Chan Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org Signed-off-by: Jakub Kicinski

net: ethtool: ts: add separate counter for unconfirmed one-step TX timestamps

2025-01-18T04:01:09Z

For packets with two-step timestamp requests, the hardware timestamp comes back to the driver through a confirmation mechanism of sorts, which allows the driver to confidently bump the successful "pkts" counter. For one-step PTP, the NIC is supposed to autonomously insert its hardware TX timestamp in the packet headers while simultaneously transmitting it. There may be a confirmation that this was done successfully, or there may not. None of the current drivers which implement ethtool_ops :: get_ts_stats() also support HWTSTAMP_TX_ONESTEP_SYNC or HWTSTAMP_TX_ONESTEP_SYNC, so it is a bit unclear which model to follow. But there are NICs, such as DSA, where there is no transmit confirmation at all. Here, it would be wrong / misleading to increment the successful "pkts" counter, because one-step PTP packets can be dropped on TX just like any other packets. So introduce a special counter which signifies "yes, an attempt was made, but we don't know whether it also exited the port or not". I expect that for one-step PTP packets where a confirmation is available, the "pkts" counter would be bumped. Signed-off-by: Vladimir Oltean Reviewed-by: Jakub Kicinski Link: https://patch.msgid.link/20250116104628.123555-2-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski

net: ethtool: add support for configuring hds-thresh

2025-01-15T22:42:11Z

The hds-thresh option configures the threshold value of the header-data-split. If a received packet size is larger than this threshold value, a packet will be split into header and payload. The header indicates TCP and UDP header, but it depends on driver spec. The bnxt_en driver supports HDS(Header-Data-Split) configuration at FW level, affecting TCP and UDP too. So, If hds-thresh is set, it affects UDP and TCP packets. Example: # ethtool -G hds-thresh # ethtool -G enp14s0f0np0 tcp-data-split on hds-thresh 256 # ethtool -g enp14s0f0np0 Ring parameters for enp14s0f0np0: Pre-set maximums: ... HDS thresh: 1023 Current hardware settings: ... TCP data split: on HDS thresh: 256 The default/min/max values are not defined in the ethtool so the drivers should define themself. The 0 value means that all TCP/UDP packets' header and payload will be split. Tested-by: Stanislav Fomichev Signed-off-by: Taehee Yoo Link: https://patch.msgid.link/20250114142852.3364986-3-ap420073@gmail.com Signed-off-by: Jakub Kicinski

net: ethtool: add hds_config member in ethtool_netdev_state

2025-01-15T22:42:11Z

When tcp-data-split is UNKNOWN mode, drivers arbitrarily handle it. For example, bnxt_en driver automatically enables if at least one of LRO/GRO/JUMBO is enabled. If tcp-data-split is UNKNOWN and LRO is enabled, a driver returns ENABLES of tcp-data-split, not UNKNOWN. So, `ethtool -g eth0` shows tcp-data-split is enabled. The problem is in the setting situation. In the ethnl_set_rings(), it first calls get_ringparam() to get the current driver's config. At that moment, if driver's tcp-data-split config is UNKNOWN, it returns ENABLE if LRO/GRO/JUMBO is enabled. Then, it sets values from the user and driver's current config to kernel_ethtool_ringparam. Last it calls .set_ringparam(). The driver, especially bnxt_en driver receives ETHTOOL_TCP_DATA_SPLIT_ENABLED. But it can't distinguish whether it is set by the user or just the current config. When user updates ring parameter, the new hds_config value is updated and current hds_config value is stored to old_hdsconfig. Driver's .set_ringparam() callback can distinguish a passed tcp-data-split value is came from user explicitly. If .set_ringparam() is failed, hds_config is rollbacked immediately. Suggested-by: Jakub Kicinski Reviewed-by: Jakub Kicinski Signed-off-by: Taehee Yoo Link: https://patch.msgid.link/20250114142852.3364986-2-ap420073@gmail.com Signed-off-by: Jakub Kicinski

net: pse-pd: Clean ethtool header of PSE structures

2025-01-14T12:56:33Z

Remove PSE-specific structures from the ethtool header to improve code modularity, maintain independent headers, and reduce incremental build time. Signed-off-by: Kory Maincent Signed-off-by: Paolo Abeni

net: ethtool: plumb PHY stats to PHY drivers

2025-01-14T10:44:19Z

Introduce support for standardized PHY statistics reporting in ethtool by extending the PHYLIB framework. Add the functions phy_ethtool_get_phy_stats() and phy_ethtool_get_link_ext_stats() to provide a consistent interface for retrieving PHY-level and link-specific statistics. These functions are used within the ethtool implementation to avoid direct access to the phy_device structure outside of the PHYLIB framework. A new structure, ethtool_phy_stats, is introduced to standardize PHY statistics such as packet counts, byte counts, and error counters. Drivers are updated to include callbacks for retrieving PHY and link-specific statistics, ensuring values are explicitly set only for supported fields, initialized with ETHTOOL_STAT_NOT_SET to avoid ambiguity. Signed-off-by: Jakub Kicinski Signed-off-by: Oleksij Rempel Signed-off-by: Paolo Abeni

net: ethtool: tsinfo: Enhance tsinfo to support several hwtstamp by net topology

2024-12-16T12:51:41Z

Either the MAC or the PHY can provide hwtstamp, so we should be able to read the tsinfo for any hwtstamp provider. Enhance 'get' command to retrieve tsinfo of hwtstamp providers within a network topology. Add support for a specific dump command to retrieve all hwtstamp providers within the network topology, with added functionality for filtered dump to target a single interface. Signed-off-by: Kory Maincent Signed-off-by: David S. Miller

net: reformat kdoc return statements

2024-12-09T22:44:59Z

kernel-doc -Wall warns about missing Return: statement for non-void functions. We have a number of kdocs in our headers which are missing the colon, IOW they use * Return some value or * Returns some value Having the colon makes some sense, it should help kdoc parser avoid false positives. So add them. This is mostly done with a sed script, and removing the unnecessary cases (mostly the comments which aren't kdoc). Acked-by: Johannes Berg Acked-by: Richard Cochran Acked-by: Sergey Ryazanov Reviewed-by: Edward Cree Acked-by: Alexandra Winter Acked-by: Pablo Neira Ayuso Link: https://patch.msgid.link/20241205165914.1071102-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

Revert "net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end warnings"

2024-11-19T02:52:11Z

This reverts commit 3bd9b9abdf1563a22041b7255baea6d449902f1a. We cannot use the new tagged struct group because it throws C++ errors even under "extern C". Signed-off-by: Kees Cook Link: https://patch.msgid.link/20241115204308.3821419-1-kees@kernel.org Signed-off-by: Jakub Kicinski

net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in

2024-11-15T03:53:41Z

Ethtool ntuple filters with FLOW_RSS were originally defined as adding the base queue ID (ring_cookie) to the value from the indirection table, so that the same table could distribute over more than one set of queues when used by different filters. However, some drivers / hardware ignore the ring_cookie, and simply use the indirection table entries as queue IDs directly. Thus, for drivers which have not opted in by setting ethtool_ops.cap_rss_rxnfc_adds to declare that they support the original (addition) semantics, reject in ethtool_set_rxnfc any filter which combines FLOW_RSS and a nonzero ring. (For a ring_cookie of zero, both behaviours are equivalent.) Set the cap bit in sfc, as it is known to support this feature. Signed-off-by: Edward Cree Reviewed-by: Martin Habets Link: https://patch.msgid.link/cc3da0844083b0e301a33092a6299e4042b65221.1731499022.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski