user/sven/linux.git/include/linux/fb.h, branch v4.14.23

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

fbdev: Nuke FBINFO_MODULE

2017-08-01T15:33:02Z

Instead check info->ops->owner, which amounts to the same. Spotted because I want to remove the pile of broken and cargo-culted fb_info->flags assignments in drm drivers. Signed-off-by: Daniel Vetter Reviewed-by: Sean Paul Signed-off-by: Bartlomiej Zolnierkiewicz

fbdev: fb_defio: Export fb_deferred_io_mmap

2016-05-02T14:24:49Z

Export fb_deferred_io_mmap so drivers can change vma->vm_page_prot. When the framebuffer memory is allocated using dma_alloc_writecombine() instead of vmalloc(), I get cache syncing problems on ARM. This solves it: static int drm_fbdev_cma_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma) { fb_deferred_io_mmap(info, vma); vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); return 0; } Could this have been done in the core? Drivers that don't set (struct fb_ops *)->fb_mmap, gets a call to fb_pgprotect() at the end of the default fb_mmap implementation (drivers/video/fbdev/core/fbmem.c). This is an architecture specific function that on many platforms uses pgprot_writecombine(), but not on all. And looking at some of the fb_mmap implementations, some of them sets vm_page_prot to nocache for instance, so I think the safest bet is to do this in the driver and not in the fbdev core. And we can't call fb_pgprotect() from fb_deferred_io_mmap() either because we don't have access to the file pointer that powerpc needs. Signed-off-by: Noralf Trønnes Acked-by: Tomi Valkeinen Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1461856717-6476-5-git-send-email-noralf@tronnes.org

fbdev: kill fb_rotate

2016-02-26T11:28:35Z

The fb_rotate method in struct fb_ops is never actually invoked, and it's been that way in the entire history of git (in fact, the last occurrence of the string '->fb_rotate' vanished over 10 years ago, with b4d8aea6d6, and that merely tested whether the callback existed). So remove some dead code and make struct fb_obs a little smaller. Signed-off-by: Rasmus Villemoes Signed-off-by: Tomi Valkeinen

fbdev: Make fb-notify a no-op if CONFIG_FB=n

2015-12-15T13:41:24Z

There's no point in having support for framebuffer notifications is CONFIG_FB is disabled. This commit adds the necessary stubs for code to link properly when CONFIG_FB=n and moves fb-notify.o to be built only when CONFIG_FB=y. Signed-off-by: Ezequiel Garcia Signed-off-by: Tomi Valkeinen

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

2015-11-10T17:33:06Z

Pull drm updates from Dave Airlie: "I Was Almost Tempted To Capitalise Every Word, but then I decided I couldn't read it myself! I've also got one pull request for the sti driver outstanding. It relied on a commit in Greg's tree and I didn't find out in time, that commit is in your tree now so I might send that along once this is merged. I also had the accidental misfortune to have access to a Skylake on my desk for a few days, and I've had to encourage Intel to try harder, which seems to be happening now. Here is the main drm-next pull request for 4.4. Highlights: New driver: vc4 driver for the Rasberry Pi VPU. (From Eric Anholt at Broadcom.) Core: Atomic fbdev support Atomic helpers for runtime pm dp/aux i2c STATUS_UPDATE handling struct_mutex usage cleanups. Generic of probing support. Documentation: Kerneldoc for VGA switcheroo code. Rename to gpu instead of drm to reflect scope. i915: Skylake GuC firmware fixes HPD A support VBT backlight fallbacks Fastboot by default for some systems FBC work BXT/SKL workarounds Skylake deeper sleep state fixes amdgpu: Enable GPU scheduler by default New atombios opcodes GPUVM debugging options Stoney support. Fencing cleanups. radeon: More efficient CS checking nouveau: gk20a instance memory handling improvements. Improved PGOB detection and GK107 support Kepler GDDR5 PLL statbility improvement G8x/GT2xx reclock improvements new userspace API compatiblity fixes. virtio-gpu: Add 3D support - qemu 2.5 has it merged for it's gtk backend. msm: Initial msm88896 (snapdragon 8200) exynos: HDMI cleanups Enable mixer driver byt default Add DECON-TV support vmwgfx: Move to using memremap + fixes. rcar-du: Add support for R8A7793/4 DU armada: Remove support for non-component mode Improved plane handling Power savings while in DPMS off. tda998x: Remove unused slave encoder support Use more HDMI helpers Fix EDID read handling dwhdmi: Interlace video mode support for ipu-v3/dw_hdmi Hotplug state fixes Audio driver integration imx: More color formats support. tegra: Minor fixes/improvements" [ Merge fixup: remove unused variable 'dev' that had all uses removed in commit 4e270f088011: "drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj" ] * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (764 commits) drm/vmwgfx: Relax irq locking somewhat drm/vmwgfx: Properly flush cursor updates and page-flips drm/i915/skl: disable display side power well support for now drm/i915: Extend DSL readout fix to BDW and SKL. drm/i915: Do graphics device reset under forcewake drm/i915: Skip fence installation for objects with rotated views (v4) vga_switcheroo: Drop client power state VGA_SWITCHEROO_INIT drm/amdgpu: group together common fence implementation drm/amdgpu: remove AMDGPU_FENCE_OWNER_MOVE drm/amdgpu: remove now unused fence functions drm/amdgpu: fix fence fallback check drm/amdgpu: fix stoping the scheduler timeout drm/amdgpu: cleanup on error in amdgpu_cs_ioctl() drm/i915: Fix locking around GuC firmware load drm/amdgpu: update Fiji's Golden setting drm/amdgpu: update Fiji's rev id drm/amdgpu: extract common code in vi_common_early_init drm/amd/scheduler: don't oops on failure to load drm/amdgpu: don't oops on failure to load (v2) drm/amdgpu: don't VT switch on suspend ...

fb.h: Provide alternate screen_base pointer

2015-10-13T17:51:30Z

Some drivers use member screen_base of struct fb_info to store non- __iomem pointers, creating the need for ugly __force typecasts to avoid sparse warnings. This adds an alternate pointer without the __iomem qualifyer for this use. Signed-off-by: Lars Svensson Signed-off-by: Greg Kroah-Hartman

drm: Spell vga_switcheroo consistently

2015-09-24T18:14:19Z

Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: Lukas Wunner Signed-off-by: Daniel Vetter

fbdev: fix cea_modes array size

2015-08-20T07:20:11Z

CEA defines 64 modes, indexed from 1 to 64. modedb has cea_modes arrays, which contains 64 entries. However, the code uses the CEA indices directly, i.e. the first mode is at cea_modes[1]. This means the array is one too short. This does not cause references to uninitialized memory as the code in fbmon only allows indexes up to 63, and the cea_modes does not contain an entry for the mode 64 so it could not be used in any case. However, the code contains a check 'if (idx > ARRAY_SIZE(cea_modes)', and while that check is a no-op as at that point idx cannot be >= 63, it upsets static checkers. Fix this by increasing the cea_array size to be 65, and change the code to allow mode 64. Signed-off-by: Tomi Valkeinen Reported-by: Dan Carpenter

video: fbdev: Check Standard Timing against DMT

2015-01-15T11:33:41Z

Add the VESA Display Monitor Timing (DMT) table. During parsing of Standard Timings, it compare the 2 byte STD code with DMT to see what the VESA mode should be. If there is no entry in the vesa_modes table or no match found, it fallsback to the GTF timings. Signed-off-by: David Ung Signed-off-by: Tomi Valkeinen