io_uring: make sure openat/openat2 honor rlimit nofile

2020-03-20T14:47:27Z

Dmitry reports that a test case shows that io_uring isn't honoring a modified rlimit nofile setting. get_unused_fd_flags() checks the task signal->rlimi[] for the limits. As this isn't easily inheritable, provide a __get_unused_fd_flags() that takes the value instead. Then we can grab it when the request is prepared (from the original task), and pass that in when we do the async part part of the open. Reported-by: Dmitry Kadashev Tested-by: Dmitry Kadashev Acked-by: David S. Miller Signed-off-by: Jens Axboe

vfs, fdtable: Add fget_task helper

2020-01-13T20:48:42Z

This introduces a function which can be used to fetch a file, given an arbitrary task. As long as the user holds a reference (refcnt) to the task_struct it is safe to call, and will either return NULL on failure, or a pointer to the file, with a refcnt. This patch is based on Oleg Nesterov's (cf. [1]) patch from September 2018. [1]: Link: https://lore.kernel.org/r/20180915160423.GA31461@redhat.com Signed-off-by: Sargun Dhillon Suggested-by: Oleg Nesterov Acked-by: Christian Brauner Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20200107175927.4558-2-sargun@sargun.me Signed-off-by: Christian Brauner

fs: add fget_many() and fput_many()

2019-02-28T15:24:23Z

Some uses cases repeatedly get and put references to the same file, but the only exposed interface is doing these one at the time. As each of these entail an atomic inc or dec on a shared structure, that cost can add up. Add fget_many(), which works just like fget(), except it takes an argument for how many references to get on the file. Ditto fput_many(), which can drop an arbitrary number of references to a file. Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Jens Axboe

make alloc_file() static

2018-07-12T14:04:29Z

Acked-by: Linus Torvalds Signed-off-by: Al Viro

new helper: alloc_file_clone()

2018-07-12T14:04:28Z

alloc_file_clone(old_file, mode, ops): create a new struct file with ->f_path equal to that of old_file. pipe converted. Acked-by: Linus Torvalds Signed-off-by: Al Viro

new wrapper: alloc_file_pseudo()

2018-07-12T14:04:23Z

takes inode, vfsmount, name, O_... flags and file_operations and either returns a new struct file (in which case inode reference we held is consumed) or returns ERR_PTR(), in which case no refcounts are altered. converted aio_private_file() and sock_alloc_file() to it Acked-by: Linus Torvalds Signed-off-by: Al Viro

fold put_filp() into fput()

2018-07-12T14:04:16Z

Just check FMODE_OPENED in __fput() and be done with that... Acked-by: Linus Torvalds Signed-off-by: Al Viro

alloc_file(): switch to passing O_... flags instead of FMODE_... mode

2018-07-12T14:02:57Z

... so that it could set both ->f_flags and ->f_mode, without callers having to set ->f_flags manually. Signed-off-by: Al Viro

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

constify alloc_file()

2016-12-06T00:01:16Z

Signed-off-by: Al Viro

user/sven/linux.git/include/linux/file.h, branch v5.6.10