user/sven/linux.git/include/linux/firewire.h, branch v3.5-rc2

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

2012-05-24T19:57:47Z

Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter: - Fix mismatch between DMA mapping direction (was wrong) and DMA synchronization direction (was correct) of isochronous reception buffers of userspace drivers if vma-mapped for R/W access. For example, libdc1394 was affected. - more consistent retry stategy in device discovery/ rediscovery, and improved failure diagnostics - various small cleanups, e.g. use SCSI layer's DMA mapping API in firewire-sbp2 * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: document the absence of alignment requirements firewire: sbp2: remove superfluous blk_queue_max_segment_size() call firewire: sbp2: use scsi_dma_(un)map firewire: sbp2: give correct DMA device to scsi framework firewire: core: fw_device_refresh(): clean up error handling firewire: core: log config rom reading errors firewire: core: log error in case of failed bus manager lock firewire: move rcode_string() to core firewire: core: improve reread_config_rom() interface firewire: core: wait for inaccessible devices after bus reset firewire: ohci: omit spinlock IRQ flags where possible firewire: ohci: correct signedness of a local variable firewire: core: fix DMA mapping direction firewire: use module_pci_driver

firewire: Move fw_card kref functions into linux/firewire.h

2012-05-09T22:25:17Z

When writing a firewire driver that doesn't deal with struct fw_device objects (e.g. it only publishes FireWire units and doesn't subscribe to them), you likely need to keep referenced to struct fw_card objects so that you can send messages to other nodes. This patch moves fw_card_put(), fw_card_get() and fw_card_release() into the public include/linux/firewire.h header instead of drivers/firewire/core.h, and adds EXPORT_SYMBOL_GPL(fw_card_release). The firewire-sbp-target module requires these so it can keep a reference to the fw_card object in order that it can fetch ORBs to execute and read/write related data and status information. Signed-off-by: Chris Boot Acked-by: Stefan Richter Cc: Clemens Ladisch Signed-off-by: Nicholas Bellinger

firewire: Add function to get speed from opaque struct fw_request

2012-05-09T22:25:17Z

Sometimes it's useful to know the FireWire speed of the request that has just come in to a fw_address_handler callback. As struct fw_request is opaque we can't peek inside to get the speed out of the struct fw_packet that's just inside. For example, the SBP-2 spec says: "The speed at which the block write request to the MANAGEMENT_AGENT register is received shall determine the speed used by the target for all subsequent requests to read the initiator’s configuration ROM, fetch ORB’s from initiator memory or store status at the initiator’s status_FIFO. Command block ORB’s separately specify the speed for requests addressed to the data buffer or page table." [ ANSI T10/1155D Revision 4 page 53/54 ] Signed-off-by: Chris Boot Acked-by: Stefan Richter Cc: Clemens Ladisch Signed-off-by: Nicholas Bellinger

firewire: move rcode_string() to core

2012-04-17T20:54:55Z

There is nothing audio-specific about the rcode_string() helper, so move it from snd-firewire-lib into firewire-core to allow other code to use it. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter (fixed sound/firewire/cmp.c)

firewire: core: fix DMA mapping direction

2012-04-17T20:27:37Z

Seen with recent libdc1394: If a client mmap()s the buffer of an isochronous reception buffer with PROT_READ|PROT_WRITE instead of just PROT_READ, firewire-core sets the wrong DMA mapping direction during buffer initialization. The fix is to split fw_iso_buffer_init() into allocation and DMA mapping and to perform the latter after both buffer and DMA context were allocated. Buffer allocation and context allocation may happen in any order, but we need the context type (reception or transmission) in order to set the DMA direction of the buffer. Signed-off-by: Stefan Richter

firewire: restore the device.h include in linux/firewire.h

2012-04-02T21:41:27Z

Commit 313162d0b838 ("device.h: audit and cleanup users in main include dir") exchanged an include for a struct *device but in actuality I misread this file when creating 313162d and it should have remained an include. There were no build regressions since all consumers were already getting device.h anyway, but make it right regardless. Reported-by: Stefan Richter Signed-off-by: Paul Gortmaker Signed-off-by: Linus Torvalds

Merge tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2012-03-24T17:41:37Z

Pull avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)

firewire: allow explicit flushing of iso packet completions

2012-03-18T21:15:39Z

Extend the kernel and userspace APIs to allow reporting all currently completed isochronous packets, even if the next interrupt packet has not yet been reached. This is required to determine the status of the packets at the end of a paused or stopped stream, and useful for more precise synchronization of audio streams. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

device.h: audit and cleanup users in main include dir

2012-03-16T14:38:24Z

The header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker

firewire: core: prefix log messages with card name

2012-02-22T21:36:00Z

Associate all log messages from firewire-core with the respective card because some people have more than one card. E.g. firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core: created device fw0: GUID 0814438400000389, S800 firewire_core: phy config: new root=ffc1, gap_count=5 firewire_core: created device fw1: GUID 0814438400000388, S800 firewire_core: created device fw2: GUID 0001d202e06800d1, S800 turns into firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core 0000:04:00.0: created device fw0: GUID 0814438400000389, S800 firewire_core 0000:04:00.0: phy config: new root=ffc1, gap_count=5 firewire_core 0000:05:00.0: created device fw1: GUID 0814438400000388, S800 firewire_core 0000:04:00.0: created device fw2: GUID 0001d202e06800d1, S800 This increases the module size slightly; to keep this in check, turn the former printk wrapper macros into functions. Their implementation is largely copied from driver core's dev_printk counterparts. Signed-off-by: Stefan Richter