user/sven/linux.git/include/linux/firewire.h, branch v6.1.39

firewire: add kernel API to access packet structure in request structure for AR context

2022-04-05T16:23:05Z

In 1394 OHCI specification, descriptor of Asynchronous Receive DMA context has timeStamp field in its trailer quadlet. The field is written by the host controller for the time to receive asynchronous request subaction in isochronous cycle time. In Linux FireWire subsystem, the value of field is stored to fw_packet structure and copied to fw_request structure as the part. The fw_request structure is hidden from unit driver and passed as opaque pointer when calling registered handler. It's inconvenient to the unit driver which needs timestamp of packet. This commit adds kernel API to pick up timestamp from opaque pointer to fw_request structure. Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20220405072221.226217-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai

firewire: add kernel API to access CYCLE_TIME register

2022-04-05T16:23:04Z

1394 OHCI specification defined Isochronous Cycle Timer Register to get value of CYCLE_TIME register defined by IEEE 1394 for CSR architecture defined by ISO/IEC 13213. Unit driver can calculate packet time by compute with the value of CYCLE_TIME and timeStamp field in descriptor of each isochronous and asynchronous context. The resolution of CYCLE_TIME is 49.576 MHz, while the one of timeStamp is 8,000 Hz. Current implementation of Linux FireWire subsystem allows the driver to get the value of CYCLE_TIMER CSR register by transaction service. The transaction service has overhead in regard of access to MMIO register. This commit adds kernel API for unit driver to access the register directly. Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20220405072221.226217-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai

firewire: Remove function callback casts

2021-11-01T18:44:26Z

In 1394 OHCI specification, Isochronous Receive DMA context has several modes. One of mode is 'BufferFill' and Linux FireWire stack uses it to receive isochronous packets for multiple isochronous channel as FW_ISO_CONTEXT_RECEIVE_MULTICHANNEL. The mode is not used by in-kernel driver, while it's available for userspace. The character device driver in firewire-core includes cast of function callback for the mode since the type of callback function is different from the other modes. The case is inconvenient to effort of Control Flow Integrity builds due to -Wcast-function-type warning. This commit removes the cast. A static helper function is newly added to initialize isochronous context for the mode. The helper function arranges isochronous context to assign specific callback function after call of existent kernel API. It's noticeable that the number of isochronous channel, speed, and the size of header are not required for the mode. The helper function is used for the mode by character device driver instead of direct call of existent kernel API. The same goal can be achieved (in the ioctl_create_iso_context function) without this helper function as follows: - Call the fw_iso_context_create function passing NULL to the callback parameter. - Then setting the context->callback.sc or context->callback.mc variables based on the a->type value. However using the helper function created in this patch makes code more clear and declarative. This way avoid the call to a function with one purpose to achieved another one. Co-developed-by: Takashi Sakamoto Signed-off-by: Takashi Sakamoto Co-developed-by: Stefan Richter Signed-off-by: Stefan Richter Signed-off-by: Oscar Carter Reviewed-by: Takashi Sakamoto Testeb-by: Takashi Sakamoto Signed-off-by: Gustavo A. R. Silva

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ALSA: firewire/bebob: Add a workaround for M-Audio special Firewire series

2014-05-26T12:33:10Z

In post commit, a quirk of this firmware about transactions is reported. This commit apply a workaround for this quirk. They often fail transactions due to gap_count mismatch. This state is changed by generating bus reset. The fw_schedule_bus_reset() is an exported symbol in firewire-core. But there are no header for public. This commit moves its prototype from drivers/firewire/core.h to include/linux/firewire.h. This mismatch still affects bus management before generating this bus reset. It still takes a time to call driver's probe() because transactions are still often failed. Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai

firewire: don't use PREPARE_DELAYED_WORK

2014-03-07T15:19:57Z

PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. firewire core-device and sbp2 have been been multiplexing work items with multiple work functions. Introduce fw_device_workfn() and sbp2_lu_workfn() which invoke fw_device->workfn and sbp2_logical_unit->workfn respectively and always use the two functions as the work functions and update the users to set the ->workfn fields instead of overriding work functions using PREPARE_DELAYED_WORK(). This fixes a variety of possible regressions since a2c1c57be8d9 "workqueue: consider work function when searching for busy work items" due to which fw_workqueue lost its required non-reentrancy property. Signed-off-by: Tejun Heo Acked-by: Stefan Richter Cc: linux1394-devel@lists.sourceforge.net Cc: stable@vger.kernel.org # v3.9+ Cc: stable@vger.kernel.org # v3.8.2+ Cc: stable@vger.kernel.org # v3.4.60+ Cc: stable@vger.kernel.org # v3.2.40+

firewire: fix libdc1394/FlyCap2 iso event regression

2013-07-27T18:24:36Z

Commit 18d627113b83 (firewire: prevent dropping of completed iso packet header data) was intended to be an obvious bug fix, but libdc1394 and FlyCap2 depend on the old behaviour by ignoring all returned information and thus not noticing that not all packets have been received yet. The result was that the video frame buffers would be saved before they contained the correct data. Reintroduce the old behaviour for old clients. Tested-by: Stepan Salenikovich Tested-by: Josep Bosch Cc: # 3.4+ Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

firewire: introduce fw_driver.probe and .remove methods

2013-06-09T16:15:00Z

FireWire upper layer drivers are converted from generic struct driver.probe() and .remove() to bus-specific struct fw_driver.probe() and .remove(). The new .probe() adds a const struct ieee1394_device_id *id argument, indicating the entry in the driver's device identifiers table which matched the fw_unit to be probed. This new argument is used by the snd-firewire-speakers driver to look up device-specific parameters and methods. There is at least one other FireWire audio driver currently in development in which this will be useful too. The new .remove() drops the unused error return code. Although all in-tree drivers are being converted to the new methods, support for the old methods is left in place in this commit. This allows public developer trees to merge this commit and then move to the new fw_driver methods. Signed-off-by: Stefan Richter Acked-by: Clemens Ladisch (for sound/firewire/) Cc: Peter Hurley (for drivers/staging/fwserial/)

firewire: addendum to address handler RCU conversion

2012-09-28T09:47:42Z

Follow up on commit c285f6ff6787 "firewire: remove global lock around address handlers, convert to RCU": - address_handler_lock no longer serializes the address handler, only its function to serialize updates to the list of handlers remains. Rename the lock to address_handler_list_lock. - Callers of fw_core_remove_address_handler() must be able to sleep. Comment on this in the API documentation. - The counterpart fw_core_add_address_handler() is by nature something which is used in process context. Replace spin_lock_bh() by spin_lock() in fw_core_add_address_handler() and in fw_core_remove_address_handler(), and document that process context is now required for fw_core_add_address_handler(). - Extend the documentation of fw_address_callback_t. Signed-off-by: Stefan Richter

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

2012-07-30T16:32:39Z

Pull firewire updates from Stefan Richter: - Small fixes and optimizations. - A new sysfs attribute to tell local and remote nodes apart. Useful to set special permissions/ ownership of local nodes' /dev/fw*, to start daemons on them (for diagnostics, management, AV targets, VersaPHY initiator or targets...), to pick up their GUID to use it as GUID of an SBP2 target instance, and of course for informational purposes. * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: document is_local sysfs attribute firewire: core: add is_local sysfs device attribute firewire: ohci: initialize multiChanMode bits after reset firewire: core: fix multichannel IR with buffers larger than 2 GB firewire: ohci: sanity-check MMIO resource firewire: ohci: lazy bus time initialization firewire: core: allocate the low memory region firewire: core: make address handler length 64 bits