user/sven/linux.git/include/linux/ftrace.h, branch v3.2.78

ftrace/module: Hardcode ftrace_module_init() call into load_module()

2014-06-09T12:29:03Z

commit a949ae560a511fe4e3adf48fa44fefded93e5c2b upstream. A race exists between module loading and enabling of function tracer. CPU 1 CPU 2 ----- ----- load_module() module->state = MODULE_STATE_COMING register_ftrace_function() mutex_lock(&ftrace_lock); ftrace_startup() update_ftrace_function(); ftrace_arch_code_modify_prepare() set_all_module_text_rw(); ftrace_arch_code_modify_post_process() set_all_module_text_ro(); [ here all module text is set to RO, including the module that is loading!! ] blocking_notifier_call_chain(MODULE_STATE_COMING); ftrace_init_module() [ tries to modify code, but it's RO, and fails! ftrace_bug() is called] When this race happens, ftrace_bug() will produces a nasty warning and all of the function tracing features will be disabled until reboot. The simple solution is to treate module load the same way the core kernel is treated at boot. To hardcode the ftrace function modification of converting calls to mcount into nops. This is done in init/main.c there's no reason it could not be done in load_module(). This gives a better control of the changes and doesn't tie the state of the module to its notifiers as much. Ftrace is special, it needs to be treated as such. The reason this would work, is that the ftrace_module_init() would be called while the module is in MODULE_STATE_UNFORMED, which is ignored by the set_all_module_text_ro() call. Link: http://lkml.kernel.org/r/1395637826-3312-1-git-send-email-indou.takao@jp.fujitsu.com Reported-by: Takao Indoh Acked-by: Rusty Russell Signed-off-by: Steven Rostedt [bwh: Backported to 3.2: adjust context] Signed-off-by: Ben Hutchings

include: replace linux/module.h with "struct module" wherever possible

2011-10-31T23:32:32Z

The pretty much brings in the kitchen sink along with it, so it should be avoided wherever reasonably possible in terms of being included from other commonly used files, as it results in a measureable increase on compile times. The worst culprit was probably device.h since it is used everywhere. This file also had an implicit dependency/usage of mutex.h which was masked by module.h, and is also fixed here at the same time. There are over a dozen other headers that simply declare the struct instead of pulling in the whole file, so follow their lead and simply make it a few more. Most of the implicit dependencies on module.h being present by these headers pulling it in have been now weeded out, so we can finally make this change with hopefully minimal breakage. Signed-off-by: Paul Gortmaker

ftrace: Fix warning when CONFIG_FUNCTION_TRACER is not defined

2011-07-11T14:12:59Z

The struct ftrace_hash was declared within CONFIG_FUNCTION_TRACER but was referenced outside of it. Reported-by: Ingo Molnar Signed-off-by: Steven Rostedt

ftrace: Fix regression of :mod:module function enabling

2011-07-07T15:30:08Z

The new code that allows different utilities to pick and choose what functions they trace broke the :mod: hook that allows users to trace only functions of a particular module. The reason is that the :mod: hook bypasses the hash that is setup to allow individual users to trace their own functions and uses the global hash directly. But if the global hash has not been set up, it will cause a bug: echo '*:mod:radeon' > /sys/kernel/debug/set_ftrace_filter produces: [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [drm:radeon_crtc_page_flip] *ERROR* failed to reserve new rbo buffer before flip BUG: unable to handle kernel paging request at ffffffff8160ec90 IP: [] add_hash_entry+0x66/0xd0 PGD 1a05067 PUD 1a09063 PMD 80000000016001e1 Oops: 0003 [#1] SMP Jul 7 04:02:28 phyllis kernel: [55303.858604] CPU 1 Modules linked in: cryptd aes_x86_64 aes_generic binfmt_misc rfcomm bnep ip6table_filter hid radeon r8169 ahci libahci mii ttm drm_kms_helper drm video i2c_algo_bit intel_agp intel_gtt Pid: 10344, comm: bash Tainted: G WC 3.0.0-rc5 #1 Dell Inc. Inspiron N5010/0YXXJJ RIP: 0010:[] [] add_hash_entry+0x66/0xd0 RSP: 0018:ffff88003a96bda8 EFLAGS: 00010246 RAX: ffff8801301735c0 RBX: ffffffff8160ec80 RCX: 0000000000306ee0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff880137c92940 RBP: ffff88003a96bdb8 R08: ffff880137c95680 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff81c9df78 R13: ffff8801153d1000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f329c18a700(0000) GS:ffff880137c80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8160ec90 CR3: 000000003002b000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process bash (pid: 10344, threadinfo ffff88003a96a000, task ffff88012fcfc470) Stack: 0000000000000fd0 00000000000000fc ffff88003a96be38 ffffffff810d92f5 ffff88011c4c4e00 ffff880000000000 000000000b69f4d0 ffffffff8160ec80 ffff8800300e6f06 0000000081130295 0000000000000282 ffff8800300e6f00 Call Trace: [] match_records+0x155/0x1b0 [] ftrace_mod_callback+0xbc/0x100 [] ftrace_regex_write+0x16f/0x210 [] ftrace_filter_write+0xf/0x20 [] vfs_write+0xc8/0x190 [] sys_write+0x51/0x90 [] system_call_fastpath+0x16/0x1b Code: 48 8b 33 31 d2 48 85 f6 75 33 49 89 d4 4c 03 63 08 49 8b 14 24 48 85 d2 48 89 10 74 04 48 89 42 08 49 89 04 24 4c 89 60 08 31 d2 RIP [] add_hash_entry+0x66/0xd0 RSP CR2: ffffffff8160ec90 ---[ end trace a5d031828efdd88e ]--- Reported-by: Brian Marete Signed-off-by: Steven Rostedt

ftrace: Modify ftrace_set_filter/notrace to take ops

2011-05-18T23:22:52Z

Since users of the function tracer can now pick and choose which functions they want to trace agnostically from other users of the function tracer, we need to pass the ops struct to the ftrace_set_filter() functions. The functions ftrace_set_global_filter() and ftrace_set_global_notrace() is added to keep the old filter functions which are used to modify the generic function tracers. Signed-off-by: Steven Rostedt

ftrace: Allow dynamically allocated function tracers

2011-05-18T19:29:51Z

Now that functions may be selected individually, it only makes sense that we should allow dynamically allocated trace structures to be traced. This will allow perf to allocate a ftrace_ops structure at runtime and use it to pick and choose which functions that structure will trace. Note, a dynamically allocated ftrace_ops will always be called indirectly instead of being called directly from the mcount in entry.S. This is because there's no safe way to prevent mcount from being preempted before calling the function, unless we modify every entry.S to do so (not likely). Thus, dynamically allocated functions will now be called by the ftrace_ops_list_func() that loops through the ops that are allocated if there are more than one op allocated at a time. This loop is protected with a preempt_disable. To determine if an ftrace_ops structure is allocated or not, a new util function was added to the kernel/extable.c called core_kernel_data(), which returns 1 if the address is between _sdata and _edata. Cc: Paul E. McKenney Signed-off-by: Steven Rostedt

ftrace: Implement separate user function filtering

2011-05-18T19:29:50Z

ftrace_ops that are registered to trace functions can now be agnostic to each other in respect to what functions they trace. Each ops has their own hash of the functions they want to trace and a hash to what they do not want to trace. A empty hash for the functions they want to trace denotes all functions should be traced that are not in the notrace hash. Cc: Paul E. McKenney Signed-off-by: Steven Rostedt

ftrace: Use counters to enable functions to trace

2011-05-18T19:29:47Z

Every function has its own record that stores the instruction pointer and flags for the function to be traced. There are only two flags: enabled and free. The enabled flag states that tracing for the function has been enabled (actively traced), and the free flag states that the record no longer points to a function and can be used by new functions (loaded modules). These flags are now moved to the MSB of the flags (actually just the top 32bits). The rest of the bits (30 bits) are now used as a ref counter. Everytime a tracer register functions to trace, those functions will have its counter incremented. When tracing is enabled, to determine if a function should be traced, the counter is examined, and if it is non-zero it is set to trace. When a ftrace_ops is registered to trace functions, its hashes are examined. If the ftrace_ops filter_hash count is zero, then all functions are set to be traced, otherwise only the functions in the hash are to be traced. The exception to this is if a function is also in the ftrace_ops notrace_hash. Then that function's counter is not incremented for this ftrace_ops. Signed-off-by: Steven Rostedt

ftrace: Create a global_ops to hold the filter and notrace hashes

2011-05-18T19:29:45Z

Combine the filter and notrace hashes to be accessed by a single entity, the global_ops. The global_ops is a ftrace_ops structure that is passed to different functions that can read or modify the filtering of the function tracer. The ftrace_ops structure was modified to hold a filter and notrace hashes so that later patches may allow each ftrace_ops to have its own set of rules to what functions may be filtered. Signed-off-by: Steven Rostedt

ftrace: Use hash instead for FTRACE_FL_FILTER

2011-05-18T19:29:44Z

When multiple users are allowed to have their own set of functions to trace, having the FTRACE_FL_FILTER flag will not be enough to handle the accounting of those users. Each user will need their own set of functions. Replace the FTRACE_FL_FILTER with a filter_hash instead. This is temporary until the rest of the function filtering accounting gets in. Signed-off-by: Steven Rostedt