user/sven/linux.git/include/linux/genhd.h, branch v4.14.263

block: nr_sects_write(): Disable preemption on seqcount write

2020-06-25T13:42:00Z

[ Upstream commit 15b81ce5abdc4b502aa31dff2d415b79d2349d2f ] For optimized block readers not holding a mutex, the "number of sectors" 64-bit value is protected from tearing on 32-bit architectures by a sequence counter. Disable preemption before entering that sequence counter's write side critical section. Otherwise, the read side can preempt the write side section and spin for the entire scheduler tick. If the reader belongs to a real-time scheduling class, it can spin forever and the kernel will livelock. Fixes: c83f6bf98dc1 ("block: add partition resize function to blkpg ioctl") Cc: Signed-off-by: Ahmed S. Darwish Reviewed-by: Sebastian Andrzej Siewior Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

blk-mq: fix sysfs inflight counter

2018-06-20T19:02:49Z

[ Upstream commit bf0ddaba65ddbb2715af97041da8e7a45b2d8628 ] When the blk-mq inflight implementation was added, /proc/diskstats was converted to use it, but /sys/block/$dev/inflight was not. Fix it by adding another helper to count in-flight requests by data direction. Fixes: f299b7c7a9de ("blk-mq: provide internal in-flight variant") Signed-off-by: Omar Sandoval Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

fs: guard_bio_eod() needs to consider partitions

2017-11-30T08:40:45Z

commit 67f2519fe2903c4041c0e94394d14d372fe51399 upstream. guard_bio_eod() needs to look at the partition capacity, not just the capacity of the whole device, when determining if truncation is necessary. [ 60.268688] attempt to access beyond end of device [ 60.268690] unknown-block(9,1): rw=0, want=67103509, limit=67103506 [ 60.268693] buffer_io_error: 2 callbacks suppressed [ 60.268696] Buffer I/O error on dev md1p7, logical block 4524305, async page read Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reviewed-by: Christoph Hellwig Signed-off-by: Greg Edwards Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

blk-mq: provide internal in-flight variant

2017-08-09T19:09:28Z

We don't have to inc/dec some counter, since we can just iterate the tags. That makes inc/dec a noop, but means we have to iterate busy tags to get an in-flight count. Reviewed-by: Bart Van Assche Reviewed-by: Omar Sandoval Signed-off-by: Jens Axboe

block: make part_in_flight() take an array of two ints

2017-08-09T19:09:20Z

Instead of returning the count that matches the partition, pass in an array of two ints. Index 0 will be filled with the inflight count for the partition in question, and index 1 will filled with the root inflight count, if the partition passed in is not the root. This is in preparation for being able to calculate both in one go. Reviewed-by: Bart Van Assche Reviewed-by: Omar Sandoval Signed-off-by: Jens Axboe

block: pass in queue to inflight accounting

2017-08-09T19:09:16Z

No functional change in this patch, just in preparation for basing the inflight mechanism on the queue in question. Reviewed-by: Bart Van Assche Reviewed-by: Omar Sandoval Signed-off-by: Jens Axboe

block: remove blk_part_pack_uuid

2017-06-05T14:59:10Z

This helper was only used by IMA of all things, which would get spurious errors if CONFIG_BLOCK is disabled. Just opencode the call there. Signed-off-by: Christoph Hellwig Reviewed-by: Amir Goldstein Acked-by: Mimi Zohar Reviewed-by: Andy Shevchenko

block: get rid of blk_integrity_revalidate()

2017-04-21T20:17:27Z

Commit 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") introduced blk_integrity_revalidate(), which seems to assume ownership of the stable pages flag and unilaterally clears it if no blk_integrity profile is registered: if (bi->profile) disk->queue->backing_dev_info->capabilities |= BDI_CAP_STABLE_WRITES; else disk->queue->backing_dev_info->capabilities &= ~BDI_CAP_STABLE_WRITES; It's called from revalidate_disk() and rescan_partitions(), making it impossible to enable stable pages for drivers that support partitions and don't use blk_integrity: while the call in revalidate_disk() can be trivially worked around (see zram, which doesn't support partitions and hence gets away with zram_revalidate_disk()), rescan_partitions() can be triggered from userspace at any time. This breaks rbd, where the ceph messenger is responsible for generating/verifying CRCs. Since blk_integrity_{un,}register() "must" be used for (un)registering the integrity profile with the block layer, move BDI_CAP_STABLE_WRITES setting there. This way drivers that call blk_integrity_register() and use integrity infrastructure won't interfere with drivers that don't but still want stable pages. Fixes: 25520d55cdb6 ("block: Inline blk_integrity in struct gendisk") Cc: "Martin K. Petersen" Cc: Christoph Hellwig Cc: Mike Snitzer Cc: stable@vger.kernel.org # 4.4+, needs backporting Tested-by: Dan Williams Signed-off-by: Ilya Dryomov Signed-off-by: Jens Axboe

block: constify struct blk_integrity_profile

2017-03-25T02:34:39Z

blk_integrity_profile's are never modified, so mark them 'const' so that they are placed in .rodata and benefit from memory protection. Signed-off-by: Eric Biggers Signed-off-by: Jens Axboe