user/sven/linux.git/include/linux/gpio, branch v3.18.33

Merge tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2014-10-09T18:58:15Z

Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2014-10-08T01:16:26Z

Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ...

gpiolib: add irq_not_threaded flag to gpio_chip

2014-09-24T08:53:42Z

Some GPIO chips (e.g. the DLN2 USB adapter) have blocking get/set operation but do not need a threaded irq handler. Signed-off-by: Octavian Purdila Signed-off-by: Linus Walleij

gpio: gpiolib: set gpiochip_remove retval to void

2014-09-23T15:51:36Z

This avoids handling gpiochip remove error in device remove handler. Signed-off-by: Abdoulaye Berthe Signed-off-by: Linus Walleij

gpio: fix 'CONFIG_GPIO_IRQCHIP' comments

2014-09-05T11:54:41Z

These two typos were introduced in commit 1425052097b5 ("gpio: add IRQ chip helpers in gpiolib"). The correct symbol name is CONFIG_GPIOLIB_IRQCHIP. [jkosina@suse.cz: add changelog] Signed-off-by: Paul Bolle Signed-off-by: Jiri Kosina

gpio: move varargs hack outside #ifdef GPIOLIB

2014-09-02T08:09:43Z

commit 39b2bbe3d715cf5013b5c48695ccdd25bd3bf120 "gpio: add flags argument to gpiod_get*() functions" added a dynamic flags argument to all the GPIOD getter functions, however this did not cover the stubs so when people used gpiod stubs to compile out descriptor code, compilation failed. Solve this by: - Also rename all the stub functions __gpiod_* - Moving the vararg hack outside of #ifdef CONFIG_GPIOLIB so these will always be available. Reviewed-by: Alexandre Courbot Signed-off-by: Linus Walleij

gpio: change gpiochip_request_own_desc() prototype

2014-08-29T06:58:34Z

The current prototype of gpiochip_request_own_desc() requires to obtain a pointer to a descriptor. This is in contradiction to all other GPIO request schemes, and imposes an extra step of obtaining a descriptor to drivers. Most drivers actually cannot even perform that step since the function that does it (gpichip_get_desc()) is gpiolib-private. Change gpiochip_request_own_desc() to return a descriptor from a (chip, hwnum) tuple and update users of this function (currently gpiolib-acpi only). Signed-off-by: Alexandre Courbot Tested-by: Mika Westerberg Signed-off-by: Linus Walleij

gpio: move GPIOD flags outside #ifdef

2014-08-21T12:44:36Z

The GPIOD flags are defined inside the #ifdef CONFIG_GPIOLIB switch, making the gpiolib stubs fail if these flags are used by a consumer. This is not correct: the stubs should compile fine without GPIOLIB. Reported-by: Ulf Hansson Reviewed-by: Alexandre Courbot Signed-off-by: Linus Walleij

gpio: add missing includes in machine.h

2014-08-07T09:54:51Z

linux/types.h and linux/list.h should be included so the typed used in the header file are always properly declared. Reported-by: Stephen Rothwell Reported-by: Thierry Reding Signed-off-by: Alexandre Courbot Signed-off-by: Linus Walleij

gpio: add flags argument to gpiod_get*() functions

2014-07-28T10:28:05Z

The huge majority of GPIOs have their direction and initial value set right after being obtained by one of the gpiod_get() functions. The integer GPIO API had gpio_request_one() that took a convenience flags parameter allowing to specify an direction and value applied to the returned GPIO. This feature greatly simplifies client code and ensures errors are always handled properly. A similar feature has been requested for the gpiod API. Since setting the direction of a GPIO is so often the very next action done after obtaining its descriptor, we prefer to extend the existing functions instead of introducing new functions that would raise the number of gpiod getters to 16 (!). The drawback of this approach is that all gpiod clients need to be updated. To limit the pain, temporary macros are introduced that allow gpiod_get*() to be called with or without the extra flags argument. They will be removed once all consumer code has been updated. Signed-off-by: Alexandre Courbot Reviewed-by: Mark Brown Signed-off-by: Linus Walleij