user/sven/linux.git/include/linux/host1x.h, branch v5.13.13

gpu: host1x: Split up client initalization and registration

2021-05-17T10:31:05Z

In some cases we may need to initialize the host1x client first before registering it. This commit adds a new helper that will do nothing but the initialization of the data structure. At the same time, the initialization is removed from the registration function. Note, however, that for simplicity we explicitly initialize the client when the host1x_client_register() function is called, as opposed to the low-level __host1x_client_register() function. This allows existing callers to remain unchanged. Signed-off-by: Thierry Reding

gpu: host1x: Add early init and late exit callbacks

2021-03-31T15:42:14Z

These callbacks can be used by client drivers to run code during early init and during late exit. Early init callbacks are run prior to the regular init callbacks while late exit callbacks run after the regular exit callbacks. Signed-off-by: Thierry Reding

gpu: host1x: Reserve VBLANK syncpoints at initialization

2021-03-31T15:42:13Z

On T20-T148 chips, the bootloader can set up a boot splash screen with DC configured to increment syncpoint 26/27 at VBLANK. Because of this we shouldn't allow these syncpoints to be allocated until DC has been reset and will no longer increment them in the background. As such, on these chips, reserve those two syncpoints at initialization, and only mark them free once the DC driver has indicated it's safe to do so. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding

gpu: host1x: Cleanup and refcounting for syncpoints

2021-03-31T15:42:13Z

Add reference counting for allocated syncpoints to allow keeping them allocated while jobs are referencing them. Additionally, clean up various places using syncpoint IDs to use host1x_syncpt pointers instead. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding

gpu: host1x: Allow syncpoints without associated client

2021-03-30T17:53:24Z

Syncpoints don't need to be associated with any client, so remove the property, and expose host1x_syncpt_alloc. This will allow allocating syncpoints without prior knowledge of the engine that it will be used with. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding

gpu: host1x: Use different lock classes for each client

2021-03-30T17:37:20Z

To avoid false lockdep warnings, give each client lock a different lock class, passed from the initialization site by macro. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding

media: gpu: host1x: mipi: Keep MIPI clock enabled and mutex locked till calibration done

2020-08-28T13:12:38Z

With the split of MIPI calibration into tegra_mipi_calibrate() and tegra_mipi_wait(), MIPI clock is not kept enabled and mutex is not locked till the calibration is done. So, this patch keeps MIPI clock enabled and mutex locked after triggering start of calibration till its done. To let calibration process go through its finite sequence codes before calibration logic waiting for pads idle state added wait time of 75usec to make sure it sees idle state to apply the results. This patch renames tegra_mipi_calibrate() as tegra_mipi_start_calibration() and tegra_mipi_wait() as tegra_mipi_finish_calibration() to be inline with their usage. Reviewed-by: Dmitry Osipenko Signed-off-by: Sowjanya Komatineni Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

gpu: host1x: mipi: Split tegra_mipi_calibrate() and tegra_mipi_wait()

2020-07-17T14:06:14Z

SW can trigger MIPI pads calibration any time after power on but calibration results will be latched and applied to the pads by MIPI CAL unit only when the link is in LP-11 state and then status register will be updated. For CSI, trigger of pads calibration happen during CSI stream enable where CSI receiver is kept ready prior to sensor or CSI transmitter stream start. So, pads may not be in LP-11 at this time and waiting for the calibration to be done immediate after calibration start will result in timeout. This patch splits tegra_mipi_calibrate() and tegra_mipi_wait() so triggering for calibration and waiting for it to complete can happen at different stages. Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

gpu: host1x: mipi: Update tegra_mipi_request() to be node based

2020-07-17T14:06:13Z

Tegra CSI driver need a separate MIPI device for each channel as calibration of corresponding MIPI pads for each channel should happen independently. So, this patch updates tegra_mipi_request() API to add a device_node pointer argument to allow creating mipi device for specific device node rather than a device. Signed-off-by: Sowjanya Komatineni Signed-off-by: Thierry Reding

gpu: host1x: Correct trivial kernel-doc inconsistencies

2020-06-16T16:59:45Z

Silence documentation build warnings by adding kernel-doc fields. ./include/linux/host1x.h:69: warning: Function parameter or member 'parent' not described in 'host1x_client' ./include/linux/host1x.h:69: warning: Function parameter or member 'usecount' not described in 'host1x_client' ./include/linux/host1x.h:69: warning: Function parameter or member 'lock' not described in 'host1x_client' Signed-off-by: Colton Lewis Signed-off-by: Thierry Reding