user/sven/linux.git/include/linux/if.h, branch v3.4.67

net: Add framework to allow sending packets with customized CRC.

2012-02-24T09:37:35Z

This is useful for testing RX handling of frames with bad CRCs. Requires driver support to actually put the packet on the wire properly. Signed-off-by: Ben Greear Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher

net: introduce ethernet teaming device

2011-11-13T21:10:10Z

This patch introduces new network device called team. It supposes to be very fast, simple, userspace-driven alternative to existing bonding driver. Userspace library called libteam with couple of demo apps is available here: https://github.com/jpirko/libteam Note it's still in its dipers atm. team<->libteam use generic netlink for communication. That and rtnl suppose to be the only way to configure team device, no sysfs etc. Python binding of libteam was recently introduced. Daemon providing arpmon/miimon active-backup functionality will be introduced shortly. All what's necessary is already implemented in kernel team driver. v7->v8: - check ndo_ndo_vlan_rx_[add/kill]_vid functions before calling them. - use dev_kfree_skb_any() instead of dev_kfree_skb() v6->v7: - transmit and receive functions are not checked in hot paths. That also resolves memory leak on transmit when no port is present v5->v6: - changed couple of _rcu calls to non _rcu ones in non-readers v4->v5: - team_change_mtu() uses team->lock while travesing though port list - mac address changes are moved completely to jurisdiction of userspace daemon. This way the daemon can do FOM1, FOM2 and possibly other weird things with mac addresses. Only round-robin mode sets up all ports to bond's address then enslaved. - Extended Kconfig text v3->v4: - remove redundant synchronize_rcu from __team_change_mode() - revert "set and clear of mode_ops happens per pointer, not per byte" - extend comment of function __team_change_mode() v2->v3: - team_change_mtu() uses rcu version of list traversal to unwind - set and clear of mode_ops happens per pointer, not per byte - port hashlist changed to be embedded into team structure - error branch in team_port_enter() does cleanup now - fixed rtln->rtnl v1->v2: - modes are made as modules. Makes team more modular and extendable. - several commenters' nitpicks found on v1 were fixed - several other bugs were fixed. - note I ignored Eric's comment about roundrobin port selector as Eric's way may be easily implemented as another mode (mode "random") in future. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

net: introduce IFF_UNICAST_FLT private flag

2011-08-18T03:21:27Z

Use IFF_UNICAST_FTL to find out if driver handles unicast address filtering. In case it does not, promisc mode is entered. Patch also fixes following drivers: stmmac, niu: support uc filtering and yet it propagated ndo_set_multicast_list bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set ndo_set_rx_mode but do not support uc filtering Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

net: add IFF_SKB_TX_SHARED flag to priv_flags

2011-07-28T05:39:30Z

Pktgen attempts to transmit shared skbs to net devices, which can't be used by some drivers as they keep state information in skbs. This patch adds a flag marking drivers as being able to handle shared skbs in their tx path. Drivers are defaulted to being unable to do so, but calling ether_setup enables this flag, as 90% of the drivers calling ether_setup touch real hardware and can handle shared skbs. A subsequent patch will audit drivers to ensure that the flag is set properly Signed-off-by: Neil Horman Reported-by: Jiri Pirko CC: Robert Olsson CC: Eric Dumazet CC: Alexey Dobriyan CC: David S. Miller Signed-off-by: David S. Miller

netpoll: remove IFF_IN_NETPOLL flag

2011-02-28T00:11:51Z

V4: rebase to net-next-2.6 This patch removes the flag IFF_IN_NETPOLL, we don't need it any more since we have netpoll_tx_running() now. Signed-off-by: WANG Cong Acked-by: Neil Horman Cc: Herbert Xu Signed-off-by: David S. Miller

net: fix datapath typo

2010-08-30T04:57:55Z

Signed-off-by: Simon Horman Signed-off-by: David S. Miller

net: increase the size of priv_flags and add IFF_OVS_DATAPATH

2010-08-24T03:43:17Z

IFF_OVS_DATAPATH is a place-holder for the Open vSwitch datapath which I am preparing to submit for merging. As all 16 bits of priv_flags are already assigned flags, also increase the size of priv_flags to 32 bits. Unfortunately, by my calculations this increases the size of struct net_device by 4 bytes on 32bit architectures and 8 bytes on 64 bit architectures. I couldn't see an obvious way to avoid that. Cc: Jesse Gross Signed-off-by: Simon Horman Signed-off-by: David S. Miller

bridge: use rx_handler_data pointer to store net_bridge_port pointer

2010-06-15T18:48:58Z

Register net_bridge_port pointer as rx_handler data pointer. As br_port is removed from struct net_device, another netdev priv_flag is added to indicate the device serves as a bridge port. Also rcuized pointers are now correctly dereferenced in br_fdb.c and in netfilter parts. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller

macvlan: use rx_handler_data pointer to store macvlan_port pointer V2

2010-06-15T18:47:12Z

Register macvlan_port pointer as rx_handler data pointer. As macvlan_port is removed from struct net_device, another netdev priv_flag is added to indicate the device serves as a macvlan port. Signed-off-by: Jiri Pirko Acked-by: Patrick McHardy Signed-off-by: David S. Miller

netpoll: add generic support for bridge and bonding devices

2010-05-06T07:47:21Z

This whole patchset is for adding netpoll support to bridge and bonding devices. I already tested it for bridge, bonding, bridge over bonding, and bonding over bridge. It looks fine now. To make bridge and bonding support netpoll, we need to adjust some netpoll generic code. This patch does the following things: 1) introduce two new priv_flags for struct net_device: IFF_IN_NETPOLL which identifies we are processing a netpoll; IFF_DISABLE_NETPOLL is used to disable netpoll support for a device at run-time; 2) introduce one new method for netdev_ops: ->ndo_netpoll_cleanup() is used to clean up netpoll when a device is removed. 3) introduce netpoll_poll_dev() which takes a struct net_device * parameter; export netpoll_send_skb() and netpoll_poll_dev() which will be used later; 4) hide a pointer to struct netpoll in struct netpoll_info, ditto. 5) introduce ->real_dev for struct netpoll. 6) introduce a new status NETDEV_BONDING_DESLAE, which is used to disable netconsole before releasing a slave, to avoid deadlocks. Cc: David Miller Cc: Neil Horman Signed-off-by: WANG Cong Signed-off-by: David S. Miller