user/sven/linux.git/include/linux/if_vlan.h, branch v3.18.40

vlan: introduce *vlan_hwaccel_push_inside helpers

2015-04-27T20:48:34Z

[ Upstream commit 5968250c868ceee680aa77395b24e6ddcae17d36 ] Use them to push skb->vlan_tci into the payload and avoid code duplication. Signed-off-by: Jiri Pirko Acked-by: Pravin B Shelar Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vlan: rename __vlan_put_tag to vlan_insert_tag_set_proto

2015-04-27T20:48:33Z

[ Upstream commit 62749e2cb3c4a7da3eaa5c01a7e787aebeff8536 ] Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: Jiri Pirko Acked-by: Pravin B Shelar Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vlan: kill vlan_put_tag helper

2015-04-27T20:48:33Z

[ Upstream commit b4bef1b57544b18899eb15569e3bafd8d2eeeff6 ] Since both tx and rx paths work with skb->vlan_tci, there's no need for this function anymore. Switch users directly to __vlan_hwaccel_put_tag. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: Always untag vlan-tagged traffic on input.

2014-08-11T19:16:51Z

Currently the functionality to untag traffic on input resides as part of the vlan module and is build only when VLAN support is enabled in the kernel. When VLAN is disabled, the function vlan_untag() turns into a stub and doesn't really untag the packets. This seems to create an interesting interaction between VMs supporting checksum offloading and some network drivers. There are some drivers that do not allow the user to change tx-vlan-offload feature of the driver. These drivers also seem to assume that any VLAN-tagged traffic they transmit will have the vlan information in the vlan_tci and not in the vlan header already in the skb. When transmitting skbs that already have tagged data with partial checksum set, the checksum doesn't appear to be updated correctly by the card thus resulting in a failure to establish TCP connections. The following is a packet trace taken on the receiver where a sender is a VM with a VLAN configued. The host VM is running on doest not have VLAN support and the outging interface on the host is tg3: 10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294837885 ecr 0,nop,wscale 7], length 0 10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294838888 ecr 0,nop,wscale 7], length 0 This connection finally times out. I've only access to the TG3 hardware in this configuration thus have only tested this with TG3 driver. There are a lot of other drivers that do not permit user changes to vlan acceleration features, and I don't know if they all suffere from a similar issue. The patch attempt to fix this another way. It moves the vlan header stipping code out of the vlan module and always builds it into the kernel network core. This way, even if vlan is not supported on a virtualizatoin host, the virtual machines running on top of such host will still work with VLANs enabled. CC: Patrick McHardy CC: Nithin Nayak Sujir CC: Michael Chan CC: Jiri Pirko Signed-off-by: Vladislav Yasevich Acked-by: Jiri Pirko Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-05-24T04:32:30Z

Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller

vlan: Fix build error wth vlan_get_encap_level()

2014-05-20T15:24:26Z

The new function vlan_get_encap_level() uses vlan_dev_priv() which is only conditionally avaialble when VLAN support is enabled. Make vlan_get_encap_level() conditionally available as well. Fixes: 44a4085538c8 ("bonding: Fix stacked device detection in arp monitoring") Reported-by: Stephen Rothwell CC: Stephen Rothwell Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller

bonding: Fix stacked device detection in arp monitoring

2014-05-17T02:29:05Z

Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: Ding Tianhong CC: Patric McHardy Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller

vlan: Fix lockdep warning with stacked vlan devices.

2014-05-17T02:14:49Z

This reverts commit dc8eaaa006350d24030502a4521542e74b5cb39f. vlan: Fix lockdep warning when vlan dev handle notification Instead we use the new new API to find the lock subclass of our vlan device. This way we can support configurations where vlans are interspersed with other devices: bond -> vlan -> macvlan -> vlan Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller

vlan: rename __vlan_find_dev_deep() to __vlan_find_dev_deep_rcu()

2014-05-12T18:39:13Z

The __vlan_find_dev_deep should always called in RCU, according David's suggestion, rename to __vlan_find_dev_deep_rcu looks more reasonable. Signed-off-by: Ding Tianhong Signed-off-by: David S. Miller

vlan: make a new function vlan_dev_vlan_proto() and export

2014-03-26T20:41:28Z

The vlan support 2 proto: 802.1q and 802.1ad, so make a new function called vlan_dev_vlan_proto() which could return the vlan proto for input dev. Signed-off-by: Ding Tianhong Signed-off-by: David S. Miller