user/sven/linux.git/include/linux/iio/adc, branch v5.6.2

iio: adc: ad-sigma-delta: Allow custom IRQ flags

2020-01-18T11:43:16Z

Before this patch the ad_sigma_delta implementation hardcoded the irq trigger type to low, assuming that all Sigma-Delta ADCs have the same interrupt-type. This patch allows all drivers using the ad_sigma_delta layer to set the irq trigger type to the one specified in the datasheet. Signed-off-by: Alexandru Tachici Signed-off-by: Jonathan Cameron

iio: adc: ad_sigma_delta: Export ad_sd_calibrate

2019-09-08T09:35:31Z

This patch exports the ad_sd_calibrate function in order to be able to call it from outside ad_sigma_delta. There are cases where the option to calibrate one channel at a time is necessary (ex. system calibration for zero scale and full scale). Signed-off-by: Mircea Caprioru Signed-off-by: Jonathan Cameron

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177

2019-05-30T18:29:19Z

Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Reviewed-by: Steve Winslow Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman

iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion

2019-04-04T19:21:15Z

For devices from the SigmaDelta family we need to keep CS low when doing a conversion, since the device will use the MISO line as a interrupt to indicate that the conversion is complete. This is why the driver locks the SPI bus and when the SPI bus is locked keeps as long as a conversion is going on. The current implementation gets one small detail wrong though. CS is only de-asserted after the SPI bus is unlocked. This means it is possible for a different SPI device on the same bus to send a message which would be wrongfully be addressed to the SigmaDelta device as well. Make sure that the last SPI transfer that is done while holding the SPI bus lock de-asserts the CS signal. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: ad_sigma_delta: Allow to provide custom data register address

2018-11-17T16:30:00Z

Some newer devices from the Sigma-Delta ADC family do have their data register at a different address than the current default address. Add a parameter to the ad_sigma_delta_info struct which allows to override the default address. Signed-off-by: Lars-Peter Clausen Signed-off-by: Stefan Popa Signed-off-by: Jonathan Cameron

iio: adc: stm32-dfsdm: include stm32-dfsdm-adc.h

2018-05-20T10:25:25Z

Fix the following sparse warnings: CHECK drivers/iio/adc/stm32-dfsdm-adc.c symbol 'stm32_dfsdm_get_buff_cb' was not declared. Should it be static? symbol 'stm32_dfsdm_release_buff_cb' was not declared. Should it be static? BTW, move interrupt.h to sort headers alphabetically. Signed-off-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron

iio: adc: ad7780: remove IIO_CHAN_INFO_SAMP_FREQ support

2018-03-17T20:50:26Z

The `ad7780` driver does not implement setting/getting the sampling frequency. For the ad7780/ad7781 devices, the control is done via an external pin, and the ad7170/ad7171 devices have a fixed sampling rate (so, no control). For these devices, and similar other that may be added later on, a AD_SD_CHANNEL_NO_SAMPLE_FREQ() macro has been added, which doesn't set the IIO_CHAN_INFO_SAMP_FREQ flag. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

IIO: ADC: add stm32 DFSDM support for PDM microphone

2018-01-10T10:30:13Z

This code offers a way to handle PDM audio microphones in ASOC framework. Audio driver should use consumer API. A specific management is implemented for DMA, with a callback, to allows to handle audio buffers efficiently. Signed-off-by: Arnaud Pouliquen Reviewed-by: Jonathan Cameron Signed-off-by: Mark Brown

iio: ad_sigma_delta: Implement a dedicated reset function

2017-09-24T15:58:21Z

Since most of the SD ADCs have the option of reseting the serial interface by sending a number of SCLKs with CS = 0 and DIN = 1, a dedicated function that can do this is usefull. Needed for the patch: iio: ad7793: Fix the serial interface reset Signed-off-by: Dragos Bogdan Acked-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron

staging: iio: ad7192: implement IIO_CHAN_INFO_SAMP_FREQ

2016-10-11T18:39:38Z

This driver predates the availability of IIO_CHAN_INFO_SAMP_FREQ attribute wherein usage has some advantages like it can be accessed by in-kernel consumers as well as reduces the code size. Therefore, use IIO_CHAN_INFO_SAMP_FREQ to implement the sampling_frequency attribute instead of using IIO_DEV_ATTR_SAMP_FREQ() macro. Move code from the functions associated with IIO_DEV_ATTR_SAMP_FREQ() into respective read and write hooks with the mask set to IIO_CHAN_INFO_SAMP_FREQ. Signed-off-by: Eva Rachel Retuya Signed-off-by: Jonathan Cameron