user/sven/linux.git/include/linux/iio, branch v5.10.230

iio: adc: ad9467: fix scale setting

2024-01-25T22:37:54Z

[ Upstream commit b73f08bb7fe5a0901646ca5ceaa1e7a2d5ee6293 ] When reading in_voltage_scale we can get something like: root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale 0.038146 However, when reading the available options: root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale_available 2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010 which does not make sense. Moreover, when trying to set a new scale we get an error because there's no call to __ad9467_get_scale() to give us values as given when reading in_voltage_scale. Fix it by computing the available scales during probe and properly pass the list when .read_available() is called. While at it, change to use .read_available() from iio_info. Also note that to properly fix this, adi-axi-adc.c has to be changed accordingly. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: Nuno Sa Reviewed-by: David Lechner Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adis: add '__adis_enable_irq()' implementation

2023-01-14T09:15:58Z

[ Upstream commit 99c05e4283a19a02a256f14100ca4ec3b2da3f62 ] Add '__adis_enable_irq()' implementation which is the unlocked version of 'adis_enable_irq()'. Call '__adis_enable_irq()' instead of 'adis_enable_irq()' from '__adis_intial_startup()' to keep the expected unlocked functionality. This fix is needed to remove a deadlock for all devices which are using 'adis_initial_startup()'. The deadlock occurs because the same mutex is acquired twice, without releasing it. The mutex is acquired once inside 'adis_initial_startup()', before calling '__adis_initial_startup()', and once inside 'adis_enable_irq()', which is called by '__adis_initial_startup()'. The deadlock is removed by calling '__adis_enable_irq()', instead of 'adis_enable_irq()' from within '__adis_initial_startup()'. Fixes: b600bd7eb3335 ("iio: adis: do not disabe IRQs in 'adis_init()'") Signed-off-by: Ramona Bolboaca Reviewed-by: Nuno Sá Link: https://lore.kernel.org/r/20221122082757.449452-2-ramona.bolboaca@analog.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adis: stylistic changes

2023-01-14T09:15:58Z

[ Upstream commit c39010ea6ba13bdf0003bd353e1d4c663aaac0a8 ] Minor stylistic changes to address checkptach complains when called with '--strict'. Signed-off-by: Nuno Sá Link: https://lore.kernel.org/r/20220122130905.99-3-nuno.sa@analog.com Signed-off-by: Jonathan Cameron Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation") Signed-off-by: Sasha Levin

iio: adis: handle devices that cannot unmask the drdy pin

2023-01-14T09:15:58Z

[ Upstream commit 31fa357ac809affd9f9a7d0b5d1991951e16beec ] Some devices can't mask/unmask the data ready pin and in those cases each driver was just calling '{dis}enable_irq()' to control the trigger state. This change, moves that handling into the library by introducing a new boolean in the data structure that tells the library that the device cannot unmask the pin. On top of controlling the trigger state, we can also use this flag to automatically request the IRQ with 'IRQF_NO_AUTOEN' in case it is set. So far, all users of the library want to start operation with IRQs/DRDY pin disabled so it should be fairly safe to do this inside the library. Signed-off-by: Nuno Sá Link: https://lore.kernel.org/r/20210903141423.517028-3-nuno.sa@analog.com Signed-off-by: Jonathan Cameron Stable-dep-of: 99c05e4283a1 ("iio: adis: add '__adis_enable_irq()' implementation") Signed-off-by: Sasha Levin

iio: st_sensors: Add a local lock for protecting odr

2022-06-14T16:32:41Z

[ Upstream commit 474010127e2505fc463236470908e1ff5ddb3578 ] Right now the (framework) mlock lock is (ab)used for multiple purposes: 1- protecting concurrent accesses over the odr local cache 2- avoid changing samplig frequency whilst buffer is running Let's start by handling situation #1 with a local lock. Suggested-by: Jonathan Cameron Cc: Denis Ciocca Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/r/20220207143840.707510-7-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: cros_ec_sensors: Fix alignment of buffer in iio_push_to_buffers_with_timestamp()

2021-07-14T14:56:37Z

[ Upstream commit 8dea228b174ac9637b567e5ef54f4c40db4b3c41 ] The samples buffer is passed to iio_push_to_buffers_with_timestamp() which requires a buffer aligned to 8 bytes as it is assumed that the timestamp will be naturally aligned if present. Fixes tag is inaccurate but prior to that likely manual backporting needed (for anything before 4.18) Earlier than that the include file to fix is drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.h: commit 974e6f02e27 ("iio: cros_ec_sensors_core: Add common functions for the ChromeOS EC Sensor Hub.") present since kernel stable 4.10. (Thanks to Gwendal for tracking this down) Fixes: 5a0b8cb46624c ("iio: cros_ec: Move cros_ec_sensors_core.h in /include") Signed-off-by: Jonathan Cameron Reviewed-by: Gwendal Grignou

iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack

2020-12-30T10:54:19Z

commit 0fb6ee8d0b5e90b72f870f76debc8bd31a742014 upstream. Use a heap allocated memory for the SPI transfer buffer. Using stack memory can corrupt stack memory when using DMA on some systems. This change moves the buffer from the stack of the trigger handler call to the heap of the buffer of the state struct. The size increases takes into account the alignment for the timestamp, which is 8 bytes. The 'data' buffer is split into 'tx_buf' and 'rx_buf', to make a clearer separation of which part of the buffer should be used for TX & RX. Fixes: af3008485ea03 ("iio:adc: Add common code for ADI Sigma Delta devices") Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20201124123807.19717-1-alexandru.ardelean@analog.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

Merge tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2020-10-15T16:46:23Z

Pull staging / IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no staging drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits) staging: comedi: check validity of wMaxPacketSize of usb endpoints found staging: wfx: improve robustness of wfx_get_hw_rate() staging: wfx: drop unicode characters from strings staging: wfx: gpiod_get_value() can return an error staging: wfx: increase robustness of hif_generic_confirm() staging: wfx: wfx_init_common() returns NULL on error staging: wfx: standardize the error when vif does not exist staging: wfx: check memory allocation staging: wfx: improve error handling of hif_join() staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c staging: rtl8188eu: Fix long lines dt-bindings: staging: wfx: silabs,wfx yaml conversion staging: wfx: update copyrights dates staging: wfx: fix QoS priority for slow buses staging: wfx: fix BA sessions for older firmwares staging: wfx: remove remaining code of 'secure link' feature staging: wfx: fix handling of MMIC error staging: vchiq: Fix list_for_each exit tests staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t ...

iio: cros_ec: unify hw fifo attributes into the core file

2020-09-29T16:27:07Z

The intent here is to minimize the use of iio_buffer_set_attrs(). Since we are planning to add support for multiple IIO buffers per IIO device, the issue has to do with: 1. Accessing 'indio_dev->buffer' directly (as is done with 'iio_buffer_set_attrs(indio_dev->buffer, )'). 2. The way that the buffer attributes would get handled or expanded when there are more buffers per IIO device. Current a sysfs kobj_type expands into a 'device' object that expands into an 'iio_dev' object. We will need to change this, so that the sysfs attributes for IIO buffers expand into IIO buffers at some point. Right now, the current IIO framework works fine for the '1 IIO device == 1 IIO buffer' case (that is now). Signed-off-by: Alexandru Ardelean Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200923130339.997902-1-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron

iio: buffer-dmaengine: remove non managed alloc/free

2020-09-29T16:27:06Z

This is to encourage the use of devm_iio_dmaengine_buffer_alloc(). Currently the managed version of the DMAEngine buffer alloc is the only function used from this part of the framework. Signed-off-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20200923121810.944075-1-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron