user/sven/linux.git/include/linux/input, branch v3.2.78

Input: eeti_ts: pass gpio value instead of IRQ

2012-08-19T17:15:34Z

commit 4eef6cbfcc03b294d9d334368a851b35b496ce53 upstream. The EETI touchscreen asserts its IRQ line as soon as it has data in its internal buffers. The line is automatically deasserted once all data has been read via I2C. Hence, the driver has to monitor the GPIO line and cannot simply rely on the interrupt handler reception. In the current implementation of the driver, irq_to_gpio() is used to determine the GPIO number from the i2c_client's IRQ value. As irq_to_gpio() is not available on all platforms, this patch changes this and makes the driver ignore the passed in IRQ. Instead, a GPIO is added to the platform_data struct and gpio_to_irq is used to derive the IRQ from that GPIO. If this fails, bail out. The driver is only able to work in environments where the touchscreen GPIO can be mapped to an IRQ. Without this patch, building raumfeld_defconfig results in: drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active': drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration] Signed-off-by: Daniel Mack Signed-off-by: Arnd Bergmann Cc: Dmitry Torokhov Cc: Sven Neumann Cc: linux-input@vger.kernel.org Cc: Haojian Zhuang [bwh: Backported to 3.2: raumfeld_controller_i2c_board_info.irq was initialised using gpio_to_irq(), but this doesn't seem to matter] Signed-off-by: Ben Hutchings

Input: adp5589-keys - add support for the ADP5585 derivatives

2011-10-19T04:26:55Z

The ADP5585 family keypad decoder and IO expander is similar to the ADP5589, however it features less IO pins, and lacks hardware assisted key-lock functionality. Unfortunately the register addresses are different, as well as the event codes and bit organization within the port related registers. Move ADP5589 Register defines from the header file into the main source file. Add new defines while making sure we don't break existing platform_data. Add register address translation, and turn device specific defines into variables. Introduce some helper functions and disable functions that doesn't exist on the added devices. Signed-off-by: Michael Hennerich Signed-off-by: Dmitry Torokhov

Input: adxl34x - documentation cleanup

2011-09-21T05:46:32Z

This patch clarifies a few bits of documentation in the header file for the adxl34x driver. Signed-off-by: Michael Tandy Acked-by: Michael Hennerich Signed-off-by: Dmitry Torokhov

Input: add support for Kionix KXTJ9 accelerometer

2011-07-07T04:23:54Z

Signed-off-by: Chris Hudson Signed-off-by: Dmitry Torokhov

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2011-06-20T15:59:46Z

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: sh_keysc - 8x8 MODE_6 fix Input: omap-keypad - add missing input_sync() Input: evdev - try to wake up readers only if we have full packet Input: properly assign return value of clamp() macro.

Input: sh_keysc - 8x8 MODE_6 fix

2011-06-18T09:55:01Z

According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys. Bump up MAXKEYS to 64 too. Signed-off-by: Magnus Damm Reviewed-by: Simon Horman Signed-off-by: Dmitry Torokhov

input: Add support for Qualcomm PMIC8XXX power key

2011-05-26T17:45:54Z

Add support for PMIC8XXX power key driven over dedicated KYPD_PWR_N pin. Acked-by: Dmitry Torokhov Signed-off-by: Trilok Soni Signed-off-by: Anirudh Ghayal Signed-off-by: Samuel Ortiz

input: Add Qualcomm pm8xxx keypad controller driver

2011-05-26T17:45:53Z

Add Qualcomm PMIC8XXX based keypad controller driver supporting upto 18x8 matrix configuration. Acked-by: Dmitry Torokhov Signed-off-by: Trilok Soni Signed-off-by: Anirudh Ghayal Signed-off-by: Samuel Ortiz

Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander

2011-05-19T07:59:55Z

From http://www.analog.com/ADP5589: The ADP5589 is an I/O port expander and keypad matrix decoder designed for QWERTY type phones that require a large keypad matrix and expanded I/O lines. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Dmitry Torokhov

Input: ad714x - allow platform code to specify irqflags

2011-05-17T06:20:13Z

Add option to specify irqflags in platfrom data. Also update copyright notice. Signed-off-by: Michael Hennerich Tested-by: Jean-Francois Dagenais Signed-off-by: Dmitry Torokhov