user/sven/linux.git/include/linux/intel-iommu.h, branch v5.12-rc2

iommu/vt-d: Audit IOMMU Capabilities and add helper functions

2021-02-04T13:42:00Z

Audit IOMMU Capability/Extended Capability and check if the IOMMUs have the consistent value for features. Report out or scale to the lowest supported when IOMMU features have incompatibility among IOMMUs. Report out features when below features are mismatched: - First Level 5 Level Paging Support (FL5LP) - First Level 1 GByte Page Support (FL1GP) - Read Draining (DRD) - Write Draining (DWD) - Page Selective Invalidation (PSI) - Zero Length Read (ZLR) - Caching Mode (CM) - Protected High/Low-Memory Region (PHMR/PLMR) - Required Write-Buffer Flushing (RWBF) - Advanced Fault Logging (AFL) - RID-PASID Support (RPS) - Scalable Mode Page Walk Coherency (SMPWC) - First Level Translation Support (FLTS) - Second Level Translation Support (SLTS) - No Write Flag Support (NWFS) - Second Level Accessed/Dirty Support (SLADS) - Virtual Command Support (VCS) - Scalable Mode Translation Support (SMTS) - Device TLB Invalidation Throttle (DIT) - Page Drain Support (PDS) - Process Address Space ID Support (PASID) - Extended Accessed Flag Support (EAFS) - Supervisor Request Support (SRS) - Execute Request Support (ERS) - Page Request Support (PRS) - Nested Translation Support (NEST) - Snoop Control (SC) - Pass Through (PT) - Device TLB Support (DT) - Queued Invalidation (QI) - Page walk Coherency (C) Set capability to the lowest supported when below features are mismatched: - Maximum Address Mask Value (MAMV) - Number of Fault Recording Registers (NFR) - Second Level Large Page Support (SLLPS) - Fault Recording Offset (FRO) - Maximum Guest Address Width (MGAW) - Supported Adjusted Guest Address Width (SAGAW) - Number of Domains supported (NDOMS) - Pasid Size Supported (PSS) - Maximum Handle Mask Value (MHMV) - IOTLB Register Offset (IRO) Signed-off-by: Kyung Min Park Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20210130184452.31711-1-kyung.min.park@intel.com Link: https://lore.kernel.org/r/20210204014401.2846425-3-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel

iommu/vt-d: Fix 'physical' typos

2021-02-04T13:42:00Z

Fix misspellings of "physical". Signed-off-by: Bjorn Helgaas Signed-off-by: Lu Baolu Link: https://lore.kernel.org/linux-iommu/20210126211738.2920789-1-helgaas@kernel.org Link: https://lore.kernel.org/r/20210204014401.2846425-2-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel

iommu/vt-d: Preset Access/Dirty bits for IOVA over FL

2021-01-28T10:33:35Z

The Access/Dirty bits in the first level page table entry will be set whenever a page table entry was used for address translation or write permission was successfully translated. This is always true when using the first-level page table for kernel IOVA. Instead of wasting hardware cycles to update the certain bits, it's better to set them up at the beginning. Suggested-by: Ashok Raj Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20210115004202.953965-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel

iommu/vt-d: Fix general protection fault in aux_detach_device()

2021-01-07T14:35:14Z

The aux-domain attach/detach are not tracked, some data structures might be used after free. This causes general protection faults when multiple subdevices are created and assigned to a same guest machine: | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0 | [...] | Call Trace: | iommu_aux_detach_device+0x24/0x70 | vfio_mdev_detach_domain+0x3b/0x60 | ? vfio_mdev_set_domain+0x50/0x50 | iommu_group_for_each_dev+0x4f/0x80 | vfio_iommu_detach_group.isra.0+0x22/0x30 | vfio_iommu_type1_detach_group.cold+0x71/0x211 | ? find_exported_symbol_in_section+0x4a/0xd0 | ? each_symbol_section+0x28/0x50 | __vfio_group_unset_container+0x4d/0x150 | vfio_group_try_dissolve_container+0x25/0x30 | vfio_group_put_external_user+0x13/0x20 | kvm_vfio_group_put_external_user+0x27/0x40 [kvm] | kvm_vfio_destroy+0x45/0xb0 [kvm] | kvm_put_kvm+0x1bb/0x2e0 [kvm] | kvm_vm_release+0x22/0x30 [kvm] | __fput+0xcc/0x260 | ____fput+0xe/0x10 | task_work_run+0x8f/0xb0 | do_exit+0x358/0xaf0 | ? wake_up_state+0x10/0x20 | ? signal_wake_up_state+0x1a/0x30 | do_group_exit+0x47/0xb0 | __x64_sys_exit_group+0x18/0x20 | do_syscall_64+0x57/0x1d0 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix the crash by tracking the subdevices when attaching and detaching aux-domains. Fixes: 67b8e02b5e76 ("iommu/vt-d: Aux-domain specific domain attach/detach") Co-developed-by: Xin Zeng Signed-off-by: Xin Zeng Signed-off-by: Liu Yi L Acked-by: Lu Baolu Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon

iommu/vt-d: Move intel_iommu info from struct intel_svm to struct intel_svm_dev

2021-01-07T14:34:36Z

'struct intel_svm' is shared by all devices bound to a give process, but records only a single pointer to a 'struct intel_iommu'. Consequently, cache invalidations may only be applied to a single DMAR unit, and are erroneously skipped for the other devices. In preparation for fixing this, rework the structures so that the iommu pointer resides in 'struct intel_svm_dev', allowing 'struct intel_svm' to track them in its device list. Fixes: 1c4f88b7f1f9 ("iommu/vt-d: Shared virtual address in scalable mode") Cc: Lu Baolu Cc: Jacob Pan Cc: Raj Ashok Cc: David Woodhouse Reported-by: Guo Kaijie Reported-by: Xin Zeng Signed-off-by: Guo Kaijie Signed-off-by: Xin Zeng Signed-off-by: Liu Yi L Tested-by: Guo Kaijie Cc: stable@vger.kernel.org # v5.0+ Acked-by: Lu Baolu Link: https://lore.kernel.org/r/1609949037-25291-2-git-send-email-yi.l.liu@intel.com Signed-off-by: Will Deacon

iommu/vt-d: Avoid panic if iommu init fails in tboot system

2020-11-18T13:09:07Z

"intel_iommu=off" command line is used to disable iommu but iommu is force enabled in a tboot system for security reason. However for better performance on high speed network device, a new option "intel_iommu=tboot_noforce" is introduced to disable the force on. By default kernel should panic if iommu init fail in tboot for security reason, but it's unnecessory if we use "intel_iommu=tboot_noforce,off". Fix the code setting force_on and move intel_iommu_tboot_noforce from tboot code to intel iommu code. Fixes: 7304e8f28bb2 ("iommu/vt-d: Correctly disable Intel IOMMU force on") Signed-off-by: Zhenzhong Duan Tested-by: Lukasz Hawrylko Acked-by: Lu Baolu Link: https://lore.kernel.org/r/20201110071908.3133-1-zhenzhong.duan@gmail.com Signed-off-by: Will Deacon

Merge tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2020-10-14T19:08:34Z

Pull iommu updates from Joerg Roedel: - ARM-SMMU Updates from Will: - Continued SVM enablement, where page-table is shared with CPU - Groundwork to support integrated SMMU with Adreno GPU - Allow disabling of MSI-based polling on the kernel command-line - Minor driver fixes and cleanups (octal permissions, error messages, ...) - Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when a device tries DMA on memory owned by a guest. This needs new fault-types as well as a rewrite of the IOMMU memory semaphore for command completions. - Allow broken Intel IOMMUs (wrong address widths reported) to still be used for interrupt remapping. - IOMMU UAPI updates for supporting vSVA, where the IOMMU can access address spaces of processes running in a VM. - Support for the MT8167 IOMMU in the Mediatek IOMMU driver. - Device-tree updates for the Renesas driver to support r8a7742. - Several smaller fixes and cleanups all over the place. * tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits) iommu/vt-d: Gracefully handle DMAR units with no supported address widths iommu/vt-d: Check UAPI data processed by IOMMU core iommu/uapi: Handle data and argsz filled by users iommu/uapi: Rename uapi functions iommu/uapi: Use named union for user data iommu/uapi: Add argsz for user filled data docs: IOMMU user API iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate() iommu/arm-smmu-v3: Add SVA device feature iommu/arm-smmu-v3: Check for SVA features iommu/arm-smmu-v3: Seize private ASID iommu/arm-smmu-v3: Share process page tables iommu/arm-smmu-v3: Move definitions to a header iommu/io-pgtable-arm: Move some definitions to a header iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR iommu/amd: Use 4K page for completion wait write-back semaphore iommu/tegra-smmu: Allow to group clients in same swgroup iommu/tegra-smmu: Fix iova->phys translation ...

Merge tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-10-12T18:40:41Z

Pull x86 irq updates from Thomas Gleixner: "Surgery of the MSI interrupt handling to prepare the support of upcoming devices which require non-PCI based MSI handling: - Cleanup historical leftovers all over the place - Rework the code to utilize more core functionality - Wrap XEN PCI/MSI interrupts into an irqdomain to make irqdomain assignment to PCI devices possible. - Assign irqdomains to PCI devices at initialization time which allows to utilize the full functionality of hierarchical irqdomains. - Remove arch_.*_msi_irq() functions from X86 and utilize the irqdomain which is assigned to the device for interrupt management. - Make the arch_.*_msi_irq() support conditional on a config switch and let the last few users select it" * tag 'x86-irq-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) PCI: MSI: Fix Kconfig dependencies for PCI_MSI_ARCH_FALLBACKS x86/apic/msi: Unbreak DMAR and HPET MSI iommu/amd: Remove domain search for PCI/MSI iommu/vt-d: Remove domain search for PCI/MSI[X] x86/irq: Make most MSI ops XEN private x86/irq: Cleanup the arch_*_msi_irqs() leftovers PCI/MSI: Make arch_.*_msi_irq[s] fallbacks selectable x86/pci: Set default irq domain in pcibios_add_device() iommm/amd: Store irq domain in struct device iommm/vt-d: Store irq domain in struct device x86/xen: Wrap XEN MSI management into irqdomain irqdomain/msi: Allow to override msi_domain_alloc/free_irqs() x86/xen: Consolidate XEN-MSI init x86/xen: Rework MSI teardown x86/xen: Make xen_msi_init() static and rename it to xen_hvm_msi_init() PCI/MSI: Provide pci_dev_has_special_msi_domain() helper PCI_vmd_Mark_VMD_irqdomain_with_DOMAIN_BUS_VMD_MSI irqdomain/msi: Provide DOMAIN_BUS_VMD_MSI x86/irq: Initialize PCI/MSI domain at PCI init time x86/pci: Reducde #ifdeffery in PCI init code ...

iommu/vt-d: Change flags type to unsigned int in binding mm

2020-09-17T17:21:30Z

"flags" passed to intel_svm_bind_mm() is a bit mask and should be defined as "unsigned int" instead of "int". Change its type to "unsigned int". Suggested-by: Thomas Gleixner Signed-off-by: Fenghua Yu Signed-off-by: Borislav Petkov Reviewed-by: Tony Luck Reviewed-by: Lu Baolu Acked-by: Joerg Roedel Link: https://lkml.kernel.org/r/1600187413-163670-3-git-send-email-fenghua.yu@intel.com

drm, iommu: Change type of pasid to u32

2020-09-17T17:21:16Z

PASID is defined as a few different types in iommu including "int", "u32", and "unsigned int". To be consistent and to match with uapi definitions, define PASID and its variations (e.g. max PASID) as "u32". "u32" is also shorter and a little more explicit than "unsigned int". No PASID type change in uapi although it defines PASID as __u64 in some places. Suggested-by: Thomas Gleixner Signed-off-by: Fenghua Yu Signed-off-by: Borislav Petkov Reviewed-by: Tony Luck Reviewed-by: Lu Baolu Acked-by: Felix Kuehling Acked-by: Joerg Roedel Link: https://lkml.kernel.org/r/1600187413-163670-2-git-send-email-fenghua.yu@intel.com