user/sven/linux.git/include/linux/interrupt.h, branch v3.10.93

revert "softirq: Add support for triggering softirq work on softirqs"

2015-05-17T16:51:33Z

commit fc21c0cff2f425891b28ff6fb6b03b325c977428 upstream. This commit was incomplete in that code to remove items from the per-cpu lists was missing and never acquired a user in the 5 years it has been in the tree. We're going to implement what it seems to try to archive in a simpler way, and this code is in the way of doing so. Signed-off-by: Christoph Hellwig Cc: Jan Kara Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Pan Xinhui Signed-off-by: Greg Kroah-Hartman

genirq: Provide irq_force_affinity fallback for non-SMP

2014-06-07T20:25:38Z

commit 4c88d7f9b0d5fb0588c3386be62115cc2eaa8f9f upstream. Patch 01f8fa4f01d "genirq: Allow forcing cpu affinity of interrupts" added an irq_force_affinity() function, and 30ccf03b4a6 "clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup" subsequently uses it. However, the driver can be used with CONFIG_SMP disabled, but the function declaration is only available for CONFIG_SMP, leading to this build error: drivers/clocksource/exynos_mct.c:431:3: error: implicit declaration of function 'irq_force_affinity' [-Werror=implicit-function-declaration] irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu)); This patch introduces a dummy helper function for the non-SMP case that always returns success, to get rid of the build error. Since the patches causing the problem are marked for stable backports, this one should be as well. Signed-off-by: Arnd Bergmann Cc: Krzysztof Kozlowski Acked-by: Kukjin Kim Link: http://lkml.kernel.org/r/5619084.0zmrrIUZLV@wuerfel Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

genirq: Allow forcing cpu affinity of interrupts

2014-06-07T20:25:29Z

commit 01f8fa4f01d8362358eb90e412bd7ae18a3ec1ad upstream. The current implementation of irq_set_affinity() refuses rightfully to route an interrupt to an offline cpu. But there is a special case, where this is actually desired. Some of the ARM SoCs have per cpu timers which require setting the affinity during cpu startup where the cpu is not yet in the online mask. If we can't do that, then the local timer interrupt for the about to become online cpu is routed to some random online cpu. The developers of the affected machines tried to work around that issue, but that results in a massive mess in that timer code. We have a yet unused argument in the set_affinity callbacks of the irq chips, which I added back then for a similar reason. It was never required so it got not used. But I'm happy that I never removed it. That allows us to implement a sane handling of the above scenario. So the affected SoC drivers can add the required force handling to their interrupt chip, switch the timer code to irq_force_affinity() and things just work. This does not affect any existing user of irq_set_affinity(). Tagged for stable to allow a simple fix of the affected SoC clock event drivers. Reported-and-tested-by: Krzysztof Kozlowski Signed-off-by: Thomas Gleixner Cc: Kyungmin Park Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Cc: Tomasz Figa , Cc: Daniel Lezcano , Cc: Kukjin Kim Cc: linux-arm-kernel@lists.infradead.org, Link: http://lkml.kernel.org/r/20140416143315.717251504@linutronix.de Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

lib: cpu_rmap: avoid flushing all workqueues

2013-01-11T22:54:54Z

In some cases, free_irq_cpu_rmap() is called while holding a lock (eg rtnl). This can lead to deadlocks, because it invokes flush_scheduled_work() which ends up waiting for whole system workqueue to flush, but some pending works might try to acquire the lock we are already holding. This commit uses reference-counting to replace irq_run_affinity_notifiers(). It also removes irq_run_affinity_notifiers() altogether. [akpm@linux-foundation.org: eliminate free_cpu_rmap, rename cpu_rmap_reclaim() to cpu_rmap_release(), propagate kref_put() retval from cpu_rmap_put()] Signed-off-by: David Decotigny Reviewed-by: Ben Hutchings Acked-by: Eric Dumazet Reviewed-by: Josh Triplett Cc: "David S. Miller" Cc: Or Gerlitz Acked-by: Amir Vadai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

time: RCU permitted to stop idle entry via softirq

2012-09-23T14:42:52Z

The can_stop_idle_tick() function complains if a softirq vector is raised too late in the idle-entry process, presumably in order to prevent dangling softirq invocations from being delayed across the full idle period, which might be indefinitely long -- and if softirq was asserted any later than the call to this function, such a delay might well happen. However, RCU needs to be able to use softirq to stop idle entry in order to be able to drain RCU callbacks from the current CPU, which in turn enables faster entry into dyntick-idle mode, which in turn reduces power consumption. Because RCU takes this action at a well-defined point in the idle-entry path, it is safe for RCU to take this approach. This commit therefore silences the error message that is sometimes produced when the going-idle CPU suddenly finds that it has an RCU_SOFTIRQ to process. The error message will continue to be issued for other softirq vectors. Reported-by: Sedat Dilek Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Tested-by: Sedat Dilek Reviewed-by: Josh Triplett

random: final removal of IRQF_SAMPLE_RANDOM

2012-07-19T14:40:42Z

The IRQF_SAMPLE_RANDOM flag is finally gone from the kernel tree, only three years late. :-) Signed-off-by: "Theodore Ts'o"

genirq: reimplement exit_irq_thread() hook via task_work_add()

2012-05-24T02:11:12Z

exit_irq_thread() and task->irq_thread are needed to handle the unexpected (and unlikely) exit of irq-thread. We can use task_work instead and make this all private to kernel/irq/manage.c, cleanup plus micro-optimization. 1. rename exit_irq_thread() to irq_thread_dtor(), make it static, and move it up before irq_thread(). 2. change irq_thread() to do task_work_add(irq_thread_dtor) at the start and task_work_cancel() before return. tracehook_notify_resume() can never play with kthreads, only do_exit()->exit_task_work() can call the callback and this is what we want. 3. remove task_struct->irq_thread and the special hook in do_exit(). Signed-off-by: Oleg Nesterov Reviewed-by: Thomas Gleixner Cc: David Howells Cc: Richard Kuo Cc: Linus Torvalds Cc: Alexander Gordeev Cc: Chris Zankel Cc: David Smith Cc: "Frank Ch. Eigler" Cc: Geert Uytterhoeven Cc: Larry Woodman Cc: Peter Zijlstra Cc: Tejun Heo Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Al Viro

genirq: Streamline irq_action

2012-04-19T11:56:55Z

There is no need to have flags as unsigned long. Make it unsigned int and put it together with irq so it does not waste space on 64 bit. Make irq unsigned int while at it. Signed-off-by: Thomas Gleixner

Remove all #inclusions of asm/system.h

2012-03-28T17:30:03Z

Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*.*\n!!' `grep -Irl '^#\s*include\s*' *` Signed-off-by: David Howells

tracing/softirq: Move __raise_softirq_irqoff() out of header

2012-02-03T14:48:19Z

The __raise_softirq_irqoff() contains a tracepoint. As tracepoints in headers can cause issues, and not to mention, bloats the kernel when they are in a static inline, it is best to move the function that contains the tracepoint out of the header and into softirq.c. Link: http://lkml.kernel.org/r/20120118120711.GB14863@elte.hu Suggested-by: Ingo Molnar Signed-off-by: Steven Rostedt