user/sven/linux.git/include/linux/interrupt.h, branch v3.18.28

genirq: Simplify wakeup mechanism

2014-09-01T11:48:59Z

Currently we suspend wakeup interrupts by lazy disabling them and check later whether the interrupt has fired, but that's not sufficient for suspend to idle as there is no way to check that once we transitioned into the CPU idle state. So we change the mechanism in the following way: 1) Leave the wakeup interrupts enabled across suspend 2) Add a check to irq_may_run() which is called at the beginning of each flow handler whether the interrupt is an armed wakeup source. This check is basically free as it just extends the existing check for IRQD_IRQ_INPROGRESS. So no new conditional in the hot path. If the IRQD_WAKEUP_ARMED flag is set, then the interrupt is disabled, marked as pending/suspended and the pm core is notified about the wakeup event. Signed-off-by: Thomas Gleixner [ rjw: syscore.c and put irq_pm_check_wakeup() into pm.c ] Signed-off-by: Rafael J. Wysocki

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

2014-06-04T22:59:13Z

Pull core irq updates from Thomas Gleixner: "The irq department delivers: - Another tree wide update to get rid of the horrible create_irq interface along with its even more horrible variants. That also gets rid of the last leftovers of the initial sparse irq hackery. arch/driver specific changes have been either acked or ignored. - A fix for the spurious interrupt detection logic with threaded interrupts. - A new ARM SoC interrupt controller - The usual pile of fixes and improvements all over the place" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller genirq: Improve documentation to match current implementation ARM: iop13xx: fix msi support with sparse IRQ genirq: Provide !SMP stub for irq_set_affinity_notifier() irqchip: armada-370-xp: Move the devicetree binding documentation irqchip: gic: Use mask field in GICC_IAR genirq: Remove dynamic_irq mess ia64: Use irq_init_desc genirq: Replace dynamic_irq_init/cleanup genirq: Remove irq_reserve_irq[s] genirq: Replace reserve_irqs in core code s390: Avoid call to irq_reserve_irqs() s390: Remove pointless arch_show_interrupts() s390: pci: Check return value of alloc_irq_desc() proper sh: intc: Remove pointless irq_reserve_irqs() invocation x86, irq: Remove pointless irq_reserve_irqs() call genirq: Make create/destroy_irq() ia64 private tile: Use SPARSE_IRQ tile: pci: Use irq_alloc/free_hwirq() ...

Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next

2014-06-03T19:57:53Z

Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...

Merge branch 'irq/for-net' into irq/core

2014-05-21T02:33:09Z

Reason: Import the change which might be pulled in from net Signed-off-by: Thomas Gleixner

genirq: Provide !SMP stub for irq_set_affinity_notifier()

2014-05-21T02:31:51Z

Instead of requiring each consumer of the IRQ affinity notifier to have themselves be explicitly dependent on CONFIG_SMP, make the definition of struct irq_affinity_notify to exist independently of that config option and introduce a stub for irq_set_affinity_notifier() under non SMP configuration. Fixes: 2eacc23 ("net/mlx4_core: Enforce irq affinity changes immediatly") Signed-off-by: Eyal Perry Signed-off-by: Amir Vadai Cc: Ben Hutchings Cc: Yevgeny Petrilin Cc: Or Gerlitz Cc: David S. Miller Link: http://lkml.kernel.org/r/1400597820-30685-1-git-send-email-amirv@mellanox.com Signed-off-by: Thomas Gleixner

genirq: Provide irq_force_affinity fallback for non-SMP

2014-05-06T22:42:09Z

Patch 01f8fa4f01d "genirq: Allow forcing cpu affinity of interrupts" added an irq_force_affinity() function, and 30ccf03b4a6 "clocksource: Exynos_mct: Use irq_force_affinity() in cpu bringup" subsequently uses it. However, the driver can be used with CONFIG_SMP disabled, but the function declaration is only available for CONFIG_SMP, leading to this build error: drivers/clocksource/exynos_mct.c:431:3: error: implicit declaration of function 'irq_force_affinity' [-Werror=implicit-function-declaration] irq_force_affinity(mct_irqs[MCT_L0_IRQ + cpu], cpumask_of(cpu)); This patch introduces a dummy helper function for the non-SMP case that always returns success, to get rid of the build error. Since the patches causing the problem are marked for stable backports, this one should be as well. Signed-off-by: Arnd Bergmann Cc: Krzysztof Kozlowski Acked-by: Kukjin Kim Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/5619084.0zmrrIUZLV@wuerfel Signed-off-by: Thomas Gleixner

linux/interrupt.h: fix new kernel-doc warnings

2014-04-28T10:19:59Z

Fix new kernel-doc warnings in : Warning(include/linux/interrupt.h:219): No description found for parameter 'cpumask' Warning(include/linux/interrupt.h:219): Excess function parameter 'mask' description in 'irq_set_affinity' Warning(include/linux/interrupt.h:236): No description found for parameter 'cpumask' Warning(include/linux/interrupt.h:236): Excess function parameter 'mask' description in 'irq_force_affinity' Signed-off-by: Randy Dunlap Link: http://lkml.kernel.org/r/535DD2FD.7030804@infradead.org Signed-off-by: Thomas Gleixner

arch: Mass conversion of smp_mb__*()

2014-04-18T12:20:48Z

Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra Acked-by: Paul E. McKenney Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar

genirq: Allow forcing cpu affinity of interrupts

2014-04-17T21:36:27Z

The current implementation of irq_set_affinity() refuses rightfully to route an interrupt to an offline cpu. But there is a special case, where this is actually desired. Some of the ARM SoCs have per cpu timers which require setting the affinity during cpu startup where the cpu is not yet in the online mask. If we can't do that, then the local timer interrupt for the about to become online cpu is routed to some random online cpu. The developers of the affected machines tried to work around that issue, but that results in a massive mess in that timer code. We have a yet unused argument in the set_affinity callbacks of the irq chips, which I added back then for a similar reason. It was never required so it got not used. But I'm happy that I never removed it. That allows us to implement a sane handling of the above scenario. So the affected SoC drivers can add the required force handling to their interrupt chip, switch the timer code to irq_force_affinity() and things just work. This does not affect any existing user of irq_set_affinity(). Tagged for stable to allow a simple fix of the affected SoC clock event drivers. Reported-and-tested-by: Krzysztof Kozlowski Signed-off-by: Thomas Gleixner Cc: Kyungmin Park Cc: Marek Szyprowski Cc: Bartlomiej Zolnierkiewicz Cc: Tomasz Figa , Cc: Daniel Lezcano , Cc: Kukjin Kim Cc: linux-arm-kernel@lists.infradead.org, Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20140416143315.717251504@linutronix.de Signed-off-by: Thomas Gleixner

genirq: Provide irq_wake_thread()

2014-02-19T16:22:44Z

In course of the sdhci/sdio discussion with Russell about killing the sdio kthread hackery we discovered the need to be able to wake an interrupt thread from software. The rationale for this is, that sdio hardware can lack proper interrupt support for certain features. So the driver needs to poll the status registers, but at the same time it needs to be woken up by an hardware interrupt. To be able to get rid of the home brewn kthread construct of sdio we need a way to wake an irq thread independent of an actual hardware interrupt. Provide an irq_wake_thread() function which wakes up the thread which is associated to a given dev_id. This allows sdio to invoke the irq thread from the hardware irq handler via the IRQ_WAKE_THREAD return value and provides a possibility to wake it via a timer for the polling scenarios. That allows to simplify the sdio logic significantly. Signed-off-by: Thomas Gleixner Cc: Russell King Cc: Chris Ball Acked-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20140215003823.772565780@linutronix.de